Efficient molecular doping of polymeric semiconductors improved by coupled reaction.

Exploring chemical doping method to improve the electrical conductivity of polymers is still very attractive for researchers. In this work, we report a developed method of doping a polymer semiconductor aided by the coupled reaction that commonly exists in biological systems where a non-spontaneous reaction is driven by a spontaneous reaction. During the doping process, the chemical reaction between the dopant and the polymer is promoted by introducing a thermodynamically favorable reaction via adding additives that are highly reactive to the reduction product of the dopant to form a coupled reaction, thus significantly improving the electrical conductivity of polymers by 3-7 orders.

Capillary compression induced outstanding n-type thermoelectric power factor in CNT films towards intelligent temperature controller.

One-dimensional carbon nanotubes are promising candidates for thermoelectrics because of their excellent electrical and mechanical properties. However, the large n-type power factor remains elusive in macroscopic carbon nanotubes films. Herein, we report an outstanding n-type power factor of 6.

All-Automated Fabrication of Freestanding and Scalable Photo-Thermoelectric Devices with High Performance.

Flexible photo-thermoelectric (PTE) devices have great application prospects in the fields of solar energy conversion, ultrabroadband light detection, etc. A suitable manufacturing process to avoid the substrate effects as well as to create a narrow transition area between p-n modules for high-performance freestanding flexible PTE devices is highly desired. Herein, an automated laser fabrication (ALF) method is reported to construct the PTE devices with rylene-diimide-doped n-type single-walled carbon nanotube (SWCNT) films.

Densification Induced Decoupling of Electrical and Thermal Properties in Free-Standing MWCNT Films for Ultrahigh p- and n-Type Power Factors and Enhanced ZT.

Generating sufficient power from waste heat is one of the most important things for thermoelectric (TE) techniques in numerous practical applications. The output power density of an organic thermoelectric generator (OTEG) is proportional to the power factors (PFs) and the electrical conductivities of organic materials. However, it is still challenging to have high PFs over 1 mW m  K in free-standing films together with high electrical conductivities over 1000 S cm .

Multifunctional Filler-Free PEDOT:PSS Hydrogels with Ultrahigh Electrical Conductivity Induced by Lewis-Acid-Promoted Ion Exchange.

Highly conductive hydrogels with biotissue-like mechanical properties are of great interest in the emerging field of hydrogel bioelectronics due to their good biocompatibility, deformability, and stability. Fully polymeric hydrogels may exhibit comparable Young's modulus to biotissues. However, most of these filler-free hydrogels have a low electrical conductivity of <10 S cm , which limits their wide applications of them in digital circuits or bioelectronic devices.

A mechanical and three-dimensional finite element study of the optimum tooth sectioning depth during the extraction of low-level horizontally impacted mandibular third molar.

The present study aims to determine the optimum sectioning depth for the extraction of low-level horizontally impacted mandibular third molar (LHIM3M) using mechanical and finite element analysis. One hundred and fifty extracted mandibular third molars were randomly divided into three groups: 1, 2 or 3 mm of tooth tissue was retained at the bottom of the crown. The breaking force of teeth was tested in a universal strength testing machine.

Acid enhanced zipping effect to densify MWCNT packing for multifunctional MWCNT films with ultra-high electrical conductivity.

The outstanding electrical and mechanical properties remain elusive on macroscopic carbon nanotube (CNT) films because of the difficult material process, which limits their wide practical applications. Herein, we report high-performance multifunctional MWCNT films that possess the specific electrical conductivity of metals as well as high strength. These MWCNT films were synthesized by a floating chemical vapor deposition method, purified at high temperature and treated with concentrated HCl, and then densified due to the developed chlorosulfonic acid-enhanced zipping effect.

The radiological and histological investigation of the dental follicle of asymptomatic impacted mandibular third molars.

Objectives: The indication for removal of asymptomatic fully impacted third molars is still controversial. In this study, radiological and histological investigation of the dental follicle of asymptomatic impacted mandibular third molars was performed, aiming to provide a reference for clinical prophylactic extraction of these teeth.

Methods: Patients with impacted mandibular third molars were included and the maximum width of the dental follicle around the crown was measured in horizontal, sagittal and coronal sections by cone beam computed tomography.

Breakage and displacement of the high-speed hand-piece bur during impacted mandibular third molar extraction: three cases.

Background: The high-speed hand-piece bur is one of the methods to perform tooth sectioning during the minimally traumatic extraction of impacted mandibular third molars. During tooth sectioning, the breakage of the bur might take place when it is improperly used. Three cases of the breakage and displacement of a high-speed hand-piece bur during extraction are reported, aiming to remind dental surgeons of this complication.

Ultra-High Electrical Conductivity in Filler-Free Polymeric Hydrogels Toward Thermoelectrics and Electromagnetic Interference Shielding.

Conducting hydrogels have attracted much attention for the emerging field of hydrogel bioelectronics, especially poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) based hydrogels, because of their great biocompatibility and stability. However, the electrical conductivities of hydrogels are often lower than 1 S cm which are not suitable for digital circuits or applications in bioelectronics. Introducing conductive inorganic fillers into the hydrogels can improve their electrical conductivities.

Lateral Fully Organic P-N Diodes Created in a Single Donor-Acceptor Copolymer.

P-N junctions exist in many solid-state organic devices, such as light-emitting diodes, solar cells, and thermoelectric devices. Creating P-N junctions by bulk chemical doping in a single organic material (like silicon doped by boron and phosphorus) may capitalize the vast scientific and technological groundwork established in the inorganic semiconducting field. However, high-performance single-organic-material P-N junctions are seldom reported, because the diffusion of the dopant counterions often leads to transient rectification properties.

Functionalized starch as a novel eco-friendly vulcanization accelerator enhancing mechanical properties of natural rubber.

A novel eco-friendly vulcanization accelerator, starch supported sodium isobutyl xanthate (SSX) has been synthesized firstly. The modification of starch using sodium isobutyl xanthate (SIBX) has improved the thermal stability significantly, and the vulcanization process of natural rubber (NR) could be accelerated by SSX at 145 ℃ accordingly. More importantly, SSX can be dispersed into NR matrix uniformly along with the strong interfacial interaction between SSX and NR, as evidenced by the constrained rubber chains around SSX surface.