Publications by authors named "KunHua Wen"

As the core sensing elements of ultra-long fiber interferometer, the distributed thermal strain difference of the fiber rings can cause extra noise of the flexural disk, resulting in a penalty of the deterioration accuracy. In this paper, the thermal strain distribution characteristics of the fiber ring are firstly analyzed by the finite element method (FEM), and the distribution result is consistent with that demonstrated by the Rayleigh optical frequency-domain reflectometry (R-OFDR) strain measurement. The interferometer phase noise caused by the distributed strain difference is further studied by constructing a fully symmetric polarization-maintaining fiber-ring Mach-Zehnder interferometer (MZI) with an arm length of over 100 meters.

View Article and Find Full Text PDF

This study proposes a terahertz metamaterial structure composed of a silicon-graphene-silicon sandwich, aiming to achieve quadruple plasmon-induced transparency (PIT). This phenomenon arises from the interaction coupling of bright-dark modes within the structure. The results obtained from the coupled mode theory (CMT) calculations align with the simulations ones using the finite difference time domain (FDTD) method.

View Article and Find Full Text PDF

Submarine optical cables, utilized as fiber-optic sensors for seismic monitoring, are gaining increasing interest because of their advantages of extending the detection coverage, improving the detection quality, and enhancing long-term stability. The fiber-optic seismic monitoring sensors are mainly composed of the optical interferometer, fiber Bragg grating, optical polarimeter, and distributed acoustic sensing, respectively. This paper reviews the principles of the four optical seismic sensors, as well as their applications of submarine seismology over submarine optical cables.

View Article and Find Full Text PDF

In this paper, we propose and demonstrate a spectral splicing method (SSM) for distributed strain sensing based on optical frequency domain reflectometry (OFDR), which can achieve km level measurement length, µɛ level measurement sensitivity and 10 µɛ level measurement range. Based on the traditional method of cross-correlation demodulation, the SSM replaces the original centralized data processing method with a segmented processing method and achieves precise splicing of the spectrum corresponding to each signal segment by spatial position correction, thus realizing strain demodulation. Segmentation effectively suppresses the phase noise accumulated in the large sweep range over long distances, expands the sweep range that can be processed from the nm level to the 10 nm level, and improves strain sensitivity.

View Article and Find Full Text PDF

Optical frequency domain polarimetry (OFDP) is an emerging distributed polarization crosstalk rapid measurement method with an ultrawide dynamic range. However, interferometric phase noise induced by the laser source and ambient noise results in a trade-off between measurement length and dynamic range. In this Letter, we solve this problem with a self-referenced unbalanced Mach-Zehnder interferometer.

View Article and Find Full Text PDF

An optical vector analyzer (OVA) based on orthogonal polarization interrogation and polarization diversity detection is widely used to measure an optical device's loss, delay, or polarization-dependent features. Polarization misalignment is the OVA's primary error source. Conventional offline polarization alignment using a calibrator greatly reduces the measurement reliability and efficiency.

View Article and Find Full Text PDF

A hybrid bilayer black phosphorus (BP) and graphene structure with high sensitivity is proposed for obtaining plasmon-induced transparency (PIT). By means of surface plasmon resonance in the rectangular-ring BP structure and ribbon graphene structure, a PIT effect with high refractive index sensitivity is achieved, and the surface plasmon hybridization between graphene and anisotropic BP is analyzed theoretically. Meanwhile, the PIT effect is quantitatively described using the coupled oscillator model and the strong coherent coupling phenomena are analyzed by adjusting the coupling distance between BP and graphene, the Fermi level of graphene, and the crystal orientation of BP, respectively.

View Article and Find Full Text PDF

This study proposes a distributed large-curvature sensor based on ring-core few-mode fiber (RC-FMF) and differential pulse-pair Brillouin optical time-domain analysis (DPP-BOTDA). The RC-FMF is adhered to a thin steel substrate and an asymmetric hump shape is reconstructed using the Frenet-Serret algorithm. The proposed curvature sensor demonstrates a larger curvature-sensing range, excellent tolerance to bending-induced optical loss, and increased Brillouin gain coefficient.

View Article and Find Full Text PDF

In the field of digital holography, the speckle caused by coherent light greatly disturbs the quality of the reconstruction. This paper presents an innovative method to efficiently reduce speckle noise with a nonlocal means filter based on cosine similarity that determines the weight of each traversal pixel to the target pixel by comparing the similarity between the target pixel neighborhood and the traversal pixel neighborhood. Experimental results with qualitative and quantitative analysis indicate that the proposed method significantly improves noise reduction performance while preserving the details of the original image.

View Article and Find Full Text PDF

A kind of hybrid fiber interferometer consisting of a fiber Sagnac interferometer (FSI), a closed-cavity Fabry-Perot interferometer (FPI), and an open-cavity FPI is proposed for generating combined-Vernier-effect. Through adjusting the polarization-maintaining fiber (PMF) length of the FSI, the free spectral range (FSR) is tailored to be similar to that of the parallel-connected reference FPI for producing the first Vernier effect, of which the spectrum is used to match the sensing FPI spectrum for obtaining the second Vernier effect. Noticeable lower and upper spectral envelopes are achieved in the first and second Vernier effects, respectively, so called the combined-Vernier spectrum.

View Article and Find Full Text PDF

The application of digital holography in several fields is limited since speckle destroys the original information of the reconstructed image. This paper proposes a neighborhood filter based on multiple sub-reconstructed images according to the random distribution of speckle noise. In this method, the denoised value is equal to the weighted sum of neighboring pixel values, and the weight is calculated by the degree of correlation between different positions of multiple sub-holograms.

View Article and Find Full Text PDF

In digital holography, the phase is most important, and the quality of the reconstructed phase determines the final reconstructed image effect. However, noise is inevitably introduced in the process of recording the hologram. For regions without object light, the phase has a random distribution, which affects the final phase quality.

View Article and Find Full Text PDF

We propose a unidirectional surface plasmon polariton (SPP) launcher with high coupling efficiency and long propagation length. The structure consists of a metallic slanted grating and a metal film that are separated by a SiO layer on a quartz substrate. By inserting the SiO layer, strong interaction between the metal grating and metal film can significantly increase the conversion of incident light into SPPs.

View Article and Find Full Text PDF

This Letter presents a non-local means filter based on the Pearson correlation coefficient and Butterworth high-pass filter. In the method, the new gray value of the denoising pixel is equal to the weighted sum of the surrounding pixel values. We use the Pearson correlation coefficient between the pixels to calculate the weight of the surrounding pixels to the denoising pixel, then use Butterworth high-pass filter to optimize.

View Article and Find Full Text PDF

Plasmonic devices can modulate light beyond the diffraction limit and thus have unique advantages in realizing an ultracompact feature size. However, in most cases, external light coupling systems are needed, resulting in a prohibitively bulky footprint. In this paper, we propose an integrated plasmonic biosensor on a vertical cavity surface emitting laser (VCSEL) platform.

View Article and Find Full Text PDF

A distributed refractive index (RI) sensor based on high-performance optical frequency domain reflectometry was developed by bending a piece of standard single-mode fiber to excite sets of higher-order modes that penetrate the surrounding medium. External variations in RI modifies the profiles of the sets of excited higher-order modes, which are then partially coupled back into the fiber core and interfere with the fundamental mode. Accordingly, the fundamental mode carries the outer varied RI information, and RI sensing can be achieved by monitoring the wavelength shift of the local Rayleigh backscattered spectra.

View Article and Find Full Text PDF

Speckle reduction is a crucial technique since the presence of speckle disturbs the quality of the reconstruction in digital holography. In this paper, we present an easy, fast, and efficient single-shot method to reduce speckle noise in digital holography. The method reconstructs subholograms from a single hologram.

View Article and Find Full Text PDF

Speckle reduction is a crucial technique, since the presence of speckle disturbs the quality of the reconstruction in digital holography. In this paper, we present a redundant speckle elimination method to suppress the speckle noise. For the same position in each of the reconstructed sub-images, we consider pixels with the same gray value as information with the same speckle distribution.

View Article and Find Full Text PDF

Herein, multiple Fano resonances with excellent ability to be tuned independently are produced in a sub-wavelength metal-insulator-metal system. The input and output waveguides are separated by a metal gap, and a stub and an end-coupled cavity are placed below and to the right side of the input waveguide, respectively, as discrete states. Owing to the mode interferences, double ultra-sharp and asymmetric Fano resonant peaks are observed in the transmission spectrum.

View Article and Find Full Text PDF

A chip-scale refractive index sensor based on multiple Fano resonances is proposed by using a metal-insulator-metal (MIM) structure, which is constructed by two side-coupled semi-ring cavities and a vertical cavity. The finite-difference time-domain method and multimode interference coupled-mode theory are employed to simulate and analyze the transmission spectra of this structure, respectively. First, dual Fano resonances are generated in the MIM structure with a baffle and a semi-ring cavity.

View Article and Find Full Text PDF

A semiannular rectangular composite cavity structure based on metal-insulator-metal waveguides is proposed. By adding a rectangular cavity at a suitable position around the semiannular cavity (SAC), a single analogous plasmonic-induced absorption (PIA) effect is achieved at the expected mode of the SAC structure. After adding two rectangular cavities together in the SAC system, dual analogous PIA effects for both modes can be realized simultaneously.

View Article and Find Full Text PDF

In this study, a method is proposed for the rapid fabrication of a hexagonal compound eye microlens array (HCE-MLA) using maskless lithography technique based on digital micromirror device (DMD), in which a hexahedron array is lithographed, and subsequently, a microlens structure is lithographed layer by layer upon the hexahedron. Owing to the high filling rate of the hexagon and the aspheric surface of the paraboloid profile of the microlens, after the distribution of the required exposure dose of HCE-MLA was calculated based on dose modulation, a series of circular pattern with different radius could be obtained by equal-arc-mean slicing strategy that can adapt to the variable curvature of the target contour and improve its reconstruction precision. Then, after a hexagonal photoresist island was fabricated on the substrate, and the dose accumulated over multiple exposures, the required exposure dose profiles were reconstructed on the hexagonal photoresist island.

View Article and Find Full Text PDF

In this paper, multiple Fano resonances preferred in the refractive index sensing area are achieved based on sub-wavelength metal-insulator-metal (MIM) waveguides. Two slot cavities, which are placed between or above the MIM waveguides, can support the bright modes or the dark modes, respectively. Owing to the mode interferences, dual Fano resonances with obvious asymmetrical spectral responses are achieved.

View Article and Find Full Text PDF

In this paper, an end-coupled hexagonal resonator inserted with dual parallel metallic blocks is proposed based on subwavelength metal-insulator-metal waveguides. When the blocks are vertically inserted into the resonator, more transmission channels (three peaks) with symmetrical spectral shapes than that (one peak) of the perfect hexagonal resonator are achieved in the same wavelength range. The transmission peaks all have high transmittances; thus, the structure can be performed as an on-chip optical filter.

View Article and Find Full Text PDF

In this paper, a multichannel refractive index sensor based on a subwavelength metal⁻insulator⁻metal (MIM) waveguide coupled with tangent-ring resonators is proposed. When two tangent-ring resonators were placed above the MIM waveguide, Fano resonance with asymmetrical line shape appeared in the transmission spectrum due to the interference between the light⁻dark resonant modes. The sensitivity and figure of merit were as high as 880 nm/RIU and 964, respectively.

View Article and Find Full Text PDF