Preparations of Polyurethane Foam Composite (PUFC) Pads Containing Micro-/Nano-Crystalline Cellulose (MCC/NCC) toward the Chemical Mechanical Polishing Process.

Polyurethane foam (PUF) pads are widely used in semiconductor manufacturing, particularly for chemical mechanical polishing (CMP). This study prepares PUF composites with microcrystalline cellulose (MCC) and nanocrystalline cellulose (NCC) to improve CMP performance. MCC and NCC were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD), showing average diameters of 129.

Optimization of diformylfuran production from 5-hydroxymethylfurfural catalytic oxidation in a packed-bed continuous flow reactor.

DFF's diverse applications in pharmaceuticals, fungicides, and polymer synthesis motivate the development of efficient production methods. This study reports the continuous-flow synthesis of DFF from 5-HMF in a packed-bed reactor. The Box-Behnken design coupled with response surface methodology (RSM) was employed to optimize the reaction parameters (catalyst, solvent, temperature, oxygen flow rate, catalyst amount) for DFF yield.

Towards Sustainable Production of Polybutylene Adipate Terephthalate: Non-Biological Catalytic Syntheses of Biomass-Derived Constituents.

Renewable chemicals, which are made from renewable resources such as biomass, have attracted significant interest as substitutes for natural gas- or petroleum-derived chemicals to enhance the sustainability of the chemical and petrochemical industries. Polybutylene adipate terephthalate (PBAT), which is a copolyester of 1,4-butanediol (1,4-BDO), adipic acid (AA), and dimethyl terephthalate (DMT) or terephthalic acid (TPA), has garnered significant interest as a biodegradable polymer. This study assesses the non-biological production of PBAT monomers from biomass feedstocks via heterogeneous catalytic reactions.

Magnetic raspberry-like CuCo nanoalloy-embedded carbon as an enhanced activator of Oxone to degrade azo contaminant: Cu-induced hollowed structure and boosted activities.

Azo compounds, particularly azo dyes, are widely used but pose significant environmental risks due to their persistence and potential to form carcinogenic by-products. Advanced oxidation processes (AOPs) are effective in degrading these stubborn compounds, with Oxone activation being a particularly promising method. In this study, a unique nanohybrid material, raspberry-like CuCo alloy embedded carbon (RCCC), is facilely fabricated using CuCo-glycerate (Gly) as a template.

White Roman Goose Feather-Inspired Unidirectionally Inclined Conical Structure Arrays for Switchable Anisotropic Self-Cleaning.

White Roman goose ( ) feathers, comprised of oriented conical barbules, are coated with gland-secreted preening oils to maintain a long-term nonwetting performance for surface swimming. The geese are accustomed to combing their plumages with flat bills in case they are contaminated with oleophilic substances, during which the amphiphilic saliva spread over the barbules greatly impairs their surface hydrophobicities and allows the trapped contaminants to be anisotropically self-cleaned by water flows. Particularly, the superhydrophobic behaviors of the goose feathers are recovered as well.

Optimization of leucomalachite green degradation through electron beam and persulfate oxidation using box-behnken design and life cycle assessment.

This study explored the treatment of Leucomalachite Green (LMG) solutions using an electron beam and sodium persulfate (NaSO), employing Box-Behnken design (BBD) to optimize operational variables such as absorbed dose, initial pH and NaSO concentration. The findings highlighted an optimal absorbed dose of 4.5 kGy, a NaSO concentration of 1.

Optimizing bone and biomass co-torrefaction parameters: High-performance arsenic removal from wastewater via co-torrefied bone char.

This study aimed to investigate bone char's physicochemical transformations through co-torrefaction and co-pyrolysis processes with biomass. Additionally, it aimed to analyze the carbon sequestration process during co-torrefaction of bone and biomass and optimize the process parameters of co-torrefaction. Finally, the study sought to evaluate the arsenic sorption capacity of both torrefied and co-torrefied bone char.

Effective activation of peroxymonosulfate by CoCr-LDH for removing organic contaminants in water: from lab-scale to practical applications.

In this study, CoCr layered double hydroxide material (CoCr-LDH) was prepared and used as an effective catalyst for peroxymonosulfate (PMS) activation to degrade organics in water. The prepared CoCr-LDH material had a crystalline structure and relatively porous structure, as determined by various surface analyses. In Rhodamine B (RhB) removal, the most outstanding PMS activation ability belongs to the material with a Co:Cr molar ratio of 2:1.

Direct conversion of apricot seeds into biodiesel.

Using edible lipids for biodiesel production has been criticized, causing biodiesel production from inedible food resources to be desirable. Lipid extraction must be prioritized to produce biodiesel using an acid/base-catalyzed transesterification process, but this conversion process suffers from technical reliability. Therefore, this study introduced non-catalytic conversion of oil-bearing biomass into biodiesel.

Hepatotoxicity evaluations of different surface charged carbon quantum dots in vivo and in vitro.

Recently, carbon quantum dots (CQDs) have become popular because of their simple synthesis and potential applications. Although CQDs have high biocompatibility, their biotoxicity must be verified to reduce the possible risks associated with large-scale application. In this study, the hepatotoxicity of three CQD types, namely diammonium citrate (AC)-based (CQDs-AC), spermidine trihydrochloride (Spd)-based (CQDs-Spd), and AC- and Spd-based CQDs (CQDs-AC/Spd), were evaluated in vivo and in vitro.

Fractional condensation of bio-oil vapors from pyrolysis of various sawdust wastes in a bench-scale bubbling fluidized bed reactor.

The use of lignocellulosic waste as an energy source for substituting fossil fuels has attracted lots of attention, and pyrolysis has been established as an effective technology for this purpose. However, the utilization of bio-oil derived from non-catalytic pyrolysis faces certain constraints, making it impractical for direct application in advanced sectors. This study has focused on overcoming these challenges by employing fractional condensation of pyrolytic vapors at distinct temperatures.

Production of light olefins and monocyclic aromatic hydrocarbons from the pyrolysis of waste plastic straws over high-silica zeolite-based catalysts.

Owing to the ever-increasing generation of plastic waste, the need to develop environmentally friendly disposal methods has increased. This study explored the potential of waste plastic straw to generate valuable light olefins and monocyclic aromatic hydrocarbons (MAHs) via catalytic pyrolysis using high-silica zeolite-based catalysts. HZSM-5 (SiO/AlO:200) exhibited superior performance, yielding more light olefins (49.

Valorizing spent mushroom substrate into syngas by the thermo-chemical process.

This study investigated the conversion of agricultural biomass waste (specifically, spent mushroom substrate) into syngas via pyrolysis. Carbon dioxide was used to provide a green/sustainable feature in the pyrolysis process. All the experimental data highlight the mechanistic role of carbon dioxide (CO) in the process, demonstrated by the enhanced carbon monoxide (CO) yield from pyrolysis under CO.

Hollow-Architected Heteroatom-Doped Carbon-Supported Nanoscale Cu/Co as an Enhanced Magnetic Activator for Oxone to Degrade Toxicants in Water.

Even though transition metals can activate Oxone to degrade toxic contaminants, bimetallic materials possess higher catalytic activities because of synergistic effects, making them more attractive for Oxone activation. Herein, nanoscale CuCo-bearing N-doped carbon (CuCoNC) can be designed to afford a hollow structure as well as CuCo species by adopting cobaltic metal organic frameworks as a template. In contrast to Co-bearing N-doped carbon (CoNC), which lacks the Cu dopant, CuCo alloy nanoparticles (NPs) are contained by the Cu dopant within the carbonaceous matrix, giving CuCoNC more prominent electrochemical properties and larger porous structures and highly nitrogen moieties.

Hollow-Structured N-doped carbon-embedded CoFe NanoAlloy for boosting activation of Monopersulfate: Engineered interface and heteroatom Doping-Induced enhancements.

While transition metals are useful for activating monopersulfate (MPS) to degrade contaminants, bimetallic alloys exhibit stronger catalytic activities owing to several favorable effects. Therefore, even though Co is an efficient metal for MPS activation, CoFe alloys are even more promising heterogeneous catalysts for MPS activation. Immobilization/embedment of CoFe alloy nanoparticles (NPs) onto hetero-atom-doped carbon matrices appears as a practical strategy for evenly dispersing CoFe NPs and enhancing catalytic activities via interfacial synergies between CoFe and carbon.

Synthesis of PDMS-μ-PCL Miktoarm Star Copolymers by Combinations () of Styrenics-Assisted Atom Transfer Radical Coupling and Ring-Opening Polymerization and Study of the Self-Assembled Nanostructures.

Due to their diverse and unique physical properties, miktoarm star copolymers (μ-SCPs) have garnered significant attention. In our study, we employed α-monobomoisobutyryl-terminated polydimethylsiloxane (PDMS-Br) to carry out styrenics-assisted atom transfer radical coupling (SA ATRC) in the presence of 4-vinylbenzyl alcohol (VBA) at 0 °C. By achieving high coupling efficiency (χ = 0.

Abatement of odor emissions from wastewater treatment plants using biochar.

Odor is a critical environmental problem that negatively affects people's quality of life. Wastewater treatment plants (WWTPs) often emit various odorous compounds, such as ammonia, sulfur dioxide, and organosulfur. Abatement of odor emissions from WWTPs using biochar may contribute to achieving carbon neutrality due to the carbon negative nature, CO sorption, and negative priming effects of biochar.

A critical review on biochar production from pine wastes, upgradation techniques, environmental sustainability, and challenges.

Pine wastes, including pine needles, cones, and wood, are abundantly produced as an agroforestry by-product globally and have shown tremendous potential for biochar production. Various thermochemical conversion technologies have exhibited promising results in converting pine wastes to biochar, displaying impressive performance. Hence, this review paper aims to investigate the possibilities and recent technological advancements for synthesizing biochar from pine waste.

Construction and demolition waste as a high-efficiency advanced process for organic pollutant degradation in Fenton-like reaction to approach circular economy.

The Fenton-like reaction is a promising organic wastewater treatment reaction among advanced oxidation processes (AOP), which has emerged to replace the conventional Fenton reaction. Recycled construction and demolition waste (CDW), which is porous and rich in iron, manganese, and magnesium, can be reused as a Fenton-like catalyst. This study proposes an AOP wastewater treatment strategy using recycled porous CDW mixed with hydrogen peroxide (HO) to decompose methylene blue (MB) wastewater.

Magnetic FeO nanoparticles loaded guava leaves powder impregnated into calcium alginate hydrogel beads (FeO-GLP@CAB) for efficient removal of methylene blue dye from aqueous environment: Synthesis, characterization, and its adsorption performance.

In the present work, a novel FeO-GLP@CAB was successfully synthesized via a co-precipitation procedure and applied for the removal of methylene blue (MB) from aqueous environment. The structural and physicochemical characteristics of the as-prepared materials were explored using a variety of characterization methods, including pH, XRD, VSM, FE-SEM/EDX, BJH/BET, and FTIR. The effects of several experimental factors on the uptake of MB using FeO-GLP@CAB were examined through batch experiments.

Novel visible-light-active P-g-CN-based α-BiO/WO ternary photocatalysts with a dual Z-scheme heterostructure for the efficient decomposition of refractory ultraviolet filters and environmental hormones: Benzophenones.

The ubiquitous and refractory benzophenone (BP)-type ultraviolet filters, which are also endocrine disruptors, were commonly detected in the aquatic matrix and could not be efficiently removed by conventional wastewater treatment processes, thus causing extensive concern. Herein, a novel ternary nanocomposite, P-g-CN/α-BiO/WO (P-gBW), was successfully fabricated by mixing cocalcinated components and applied to the decomposition of BP-type ultraviolet filters. The dual-Z-scheme heterostructure of P-gBW enhances visible-light absorption, efficiently facilitates separation and mobility, and prolongs the lifetime of photoinduced charge carriers via double charge transfer mechanisms.