A comparative study based on performance and techno-economic analysis of different strategies for PV-Electrolyzer (green) hydrogen fueling incinerator system.

The integration of hydrogen in the primary energy mix requires a major technological shift in virtually every energy-related application. This study has attempted to investigate the techno-economic solar photovoltaic (PV) integrated water electrolysis and waste incineration system. Three different strategies, i.

Carbon nanotube functionalization as a route to enhancing the electrical and mechanical properties of Cu-CNT composites.

Copper-CNT (carbon nanotube) composite materials are promising alternatives to conventional conductors in applications ranging from interconnects in microelectronics to electrical cabling in aircraft and vehicles. Unfortunately, exploiting the full potential of these composites is difficult due to the poor Cu-CNT electro-mechanical interface. We demonstrate through large-scale ab initio calculations and sonication experiments that this problem can be addressed by CNT surface modification.

Advancing the Use of High-Performance Graphene-Based Multimodal Polymer Nanocomposite at Scale.

The production of an innovative, high-performance graphene-based polymer nanocomposite using cost-effective techniques was pursued in this study. Well-dispersed and uniformly distributed graphene platelets within a polymer matrix, with strong interfacial bonding between the platelets and the matrix, provided an optimal nanocomposite system for industrial interest. This study reports on the reinforcement of high molecular weight multimodal-high-density polyethylene reinforced by a microwave-induced plasma graphene, using melt intercalation.

Breaking the electrical barrier between copper and carbon nanotubes.

Improving the interface between copper and carbon nanotubes (CNTs) offers a straightforward strategy for the effective manufacturing and utilisation of Cu-CNT composite material that could be used in various industries including microelectronics, aerospace and transportation. Motivated by a combination of structural and electrical measurements on Cu-M-CNT bimetal systems (M = Ni, Cr) we show, using first principles calculations, that the conductance of this composite can exceed that of a pure Cu-CNT system and that the current density can even reach 10 A cm. The results show that the proper choice of alloying element (M) and type of contact facilitate the fabrication of ultra-conductive Cu-M-CNT systems by creating a favourable interface geometry, increasing the interface electronic density of states and reducing the contact resistance.

Improving the electrical properties of carbon nanotubes with interhalogen compounds.

The electronic properties of carbon nanostructures such as carbon nanotubes (CNTs) or graphene can easily be tuned by the action of various doping agents. We present an experimental study and numerical analysis of how and why metallic and semiconductive CNTs can be p-doped by exposing them to two interhalogens: iodine monochloride and iodine monobromide. Simple application of these compounds was found to reduce the electrical resistance by as much as 2/3 without causing any unfavorable chemical modification, which could disrupt the highly conductive network of sp carbon atoms.

Soldering of Carbon Materials Using Transition Metal Rich Alloys.

Joining of carbon materials via soldering has not been possible up to now due to lack of wetting of carbons by metals at standard soldering temperatures. This issue has been a severely restricting factor for many potential electrical/electronic and mechanical applications of nanostructured and conventional carbon materials. Here we demonstrate the formation of alloys that enable soldering of these structures.

Piezoresistive effect in carbon nanotube fibers.

The complex structure of the macroscopic assemblies of carbon nanotubes and variable intrinsic piezoresistivity of nanotubes themselves lead to highly interesting piezoresistive performance of this new type of conductive material. Here, we present an in-depth study of the piezoresistive effect in carbon nanotube fibers, i.e.

En route to controlled catalytic CVD synthesis of densely packed and vertically aligned nitrogen-doped carbon nanotube arrays.

The catalytic chemical vapour deposition (c-CVD) technique was applied in the synthesis of vertically aligned arrays of nitrogen-doped carbon nanotubes (N-CNTs). A mixture of toluene (main carbon source), pyrazine (1,4-diazine, nitrogen source) and ferrocene (catalyst precursor) was used as the injection feedstock. To optimize conditions for growing the most dense and aligned N-CNT arrays, we investigated the influence of key parameters, i.

Ultra-pure single wall carbon nanotube fibres continuously spun without promoter.

We report a new strategy towards the control of carbon nanotube (CNT) structure and continuous fibre formation using a floating catalyst direct spinning CVD process. In the procedures used to date, a sulphur promoter precursor is added to significantly enhance the rate of CNT formation in the floating catalyst synthesis. Within the reaction zone, the rapidly grown nanotubes self-assemble into bundles, followed by their continuous spinning into fibres, yarns, films or tapes.

Microwave conductivity of sorted CNT assemblies.

Recent progress with tailored growth and post-process sorting enables carbon nanotube (CNT) assemblies with predominantly metallic or semi-conducting concentrations. Cryogenic and microwave measurements performed here show transport dimensionality and overall order increasing with increasing metallic concentration, even in atmospheric doping conditions. By 120 GHz, the conductivity of predominantly semi-conducting assemblies grew to 400% its DC value at an increasing growth rate, while other concentrations a growth rate that tapered off.

Lipid nanoscaffolds in carbon nanotube arrays.

We present the fabrication of lipid nanoscaffolds inside carbon nanotube arrays by employing the nanostructural self-assembly of lipid molecules. The nanoscaffolds are finely tunable into model biomembrane-like architectures (planar), soft nanochannels (cylindrical) or 3-dimensionally ordered continuous bilayer structures (cubic). Carbon nanotube arrays hosting the above nanoscaffolds are formed by packing of highly oriented multiwalled carbon nanotubes which facilitate the alignment of lipid nanostructures without requiring an external force.

Liberation of drugs from multi-wall carbon nanotube carriers.

MWCNTs in the 'nanotube-drug' hybrids can play a role of carriers or additives (enhancers) in the more complex formulations. This work reviews qualitative and quantitative analyses of Drug Delivery Systems (DDSs) based on multi-wall carbon nanotubes (MWCNTs) and their chemically modified analogues (mainly oxidised MWCNTs). A special emphasis was placed on the chemical interactions between drug molecules and the nanotube carrier critical both in the stage of preparation/synthesis of the hybrids and liberation of the drug.

Directing chondrogenesis of stem cells with specific blends of cellulose and silk.

Biomaterials that can stimulate stem cell differentiation without growth factor supplementation provide potent and cost-effective scaffolds for regenerative medicine. We hypothesize that a scaffold prepared from cellulose and silk blends can direct stem cell chondrogenic fate. We systematically prepared cellulose blends with silk at different compositions using an environmentally benign processing method based on ionic liquids as a common solvent.

Nitrogen-induced catalyst restructuring for epitaxial growth of multiwalled carbon nanotubes.

The ability to simply and economically produce carbon nanotubes (CNTs) with a defined chiral angle is crucial for the exploitation of nanotubes for their electrical properties. We investigate a diverse range of nitrogen sources for their ability to control CNT chiral angle via epitaxial growth from highly ordered catalyst particles. Through the use of in situ mass and infrared spectrometry, we elucidate the mechanism by which these ordered catalyst particles are formed, showing that ammonia is a key intermediate in the process.

Enhancement of the mechanical properties of directly spun CNT fibers by chemical treatment.

Translating the remarkable mechanical properties of individual carbon nanotubes to macroscopic assemblies presents a unique challenge in maximizing the potential of these remarkable entities for new materials. Infinitely long individual nanotubes would represent the ideal molecular building blocks; however, in the case of length-limited nanotubes, typically in the range of micro- and millimeters, an alternative strategy could be based on the improvement of the mechanical coherency between bundles assembling the macroscopic materials, like fibers or films. Here, we present a method to enhance the mechanical performance of fibers continuously spun from a CVD reactor, by a postproduction processing methodology utilizing a chemical agent aided by UV irradiation.

Dynamics of capillary infiltration of liquids into a highly aligned multi-walled carbon nanotube film.

The physical compatibility of a highly aligned carbon nanotube (HACNT) film with liquids was established using a fast and convenient experimental protocol. Two parameters were found to be decisive for the infiltration process. For a given density of nanotube packing, the thermodynamics of the infiltration process (wettability) were described by the contact angle between the nanotube wall and a liquid meniscus (θ).

Tunable chemistry and morphology of multi-wall carbon nanotubes as a route to non-toxic, theranostic systems.

Nanomedicine is one of the most promising areas of exploitation for multi-walled carbon nanotubes (MWNTs). These 'needle-like' nanovehicles are capable of carrying drug molecules via exo- and endohedral functionalisation and are steerable by an external magnetic field due to the presence of ferromagnetic nanoparticles in the nanotube core (up to 7.3wt.

Symmetrical and unsymmetrical alpha,omega-nucleobase amide-conjugated systems.

We present the synthesis and selected physicochemical properties of several novel symmetrical and unsymmetrical alpha,omega-nucleobase mono- and bis-amide conjugated systems containing aliphatic, aromatic or saccharidic linkages. The final stage of the synthesis involves condensation of a subunit bearing carboxylic group with an amine subunit. 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM) was found to be a particularly effective condensing agent.

Toxicity and imaging of multi-walled carbon nanotubes in human macrophage cells.

Multi-walled carbon nanotubes (MWNTs) have been proposed for use in many applications and concerns about their potential effect on human health have led to the interest in understanding the interactions between MWNTs and human cells. One important technique is the visualisation of the intracellular distribution of MWNTs. We exposed human macrophage cells to unpurified MWNTs and found that a decrease in cell viability was correlated with uptake of MWNTs due to mainly necrosis.

Macroscopic fibers of well-aligned carbon nanotubes by wet spinning.

A simple process to spin fibers consisting of multi-walled carbon nanotubes (CNTs) directly from their lyotropic liquid-crystalline phase is reported. Ethylene glycol is used as the lyotropic solvent, enabling a wider range of CNT types to be spun than previously. Fibers spun with CNTs and nitrogen-doped CNTs are compared.

Four-dimensional spectral tomography of carbonaceous nanocomposites.

There is considerable interest in the adhesion of polymers to carbon nanotubes for nanocomposite applications.(1-4) One example is multiwalled carbon nanotubes (MWCNTs) dispersed in nylon 6,6.(5) We will show that high-contrast tomographic reconstructions can be created from plasmon-loss electrons that show the three-dimensional structural complexity of the MWCNT-nylon composite at the nanoscale.