Outcomes of Exeter cemented total hip arthroplasty in a county hospital: survivorship of eight hundred and ninety four hips with a minimum ten-year follow up.

Purpose: A total of 894 hips were evaluated to describe the survivorship of Exeter cemented femoral stems and report the outcomes and complications of our 'Exeter- era', and there is no study from Central or Eastern Europe demonstrating similar results.

Methods: Between January 2000 and December 2009, a total of 894 hips were included who underwent Exeter universal and V40 femoral stems with a mean follow up of 13 years. Cemented Exeter low profile polyethylene cups were used in 889 patients (99.

Direct and Indirect Bactericidal Effects of Cold Atmospheric-Pressure Microplasma and Plasma Jet.

The direct and indirect bactericidal effects of dielectric barrier discharge (DBD) cold atmospheric-pressure microplasma in an air and plasma jet generated in an argon-oxygen gas mixture was investigated on and . An AC power supply was used to generate plasma at relatively low discharge voltages (0.9-2.

Molecular Treatment of Nano-Kaolinite Generations.

A procedure is developed for defining a compositionally and structurally realistic, atomic-scale description of exfoliated clay nanoparticles from the kaolinite family of phylloaluminosilicates. By use of coordination chemical principles, chemical environments within a nanoparticle can be separated into inner, outer, and peripheral spheres. The edges of the molecular models of nanoparticles were protonated in a validated manner to achieve charge neutrality.

Feasibility of transdermal delivery of Cyclosporine A using plasma discharges.

A study of the transdermal delivery of Cyclosporine A by atmospheric plasma irradiation was realized on the epidermal layer of the Hairless Yucatan micropig. Drug flux and the amount of drug penetrated through the skin were determined by a Franz cell diffusion experiment. After treatment of the skin by atmospheric plasma jet or microplasma dielectric barrier discharge, an increase in the permeability of the skin was observed.

Real-Time Reverse-Transcription Quantitative Polymerase Chain Reaction Assay Is a Feasible Method for the Relative Quantification of Heregulin Expression in Non-Small Cell Lung Cancer Tissue.

In preclinical studies, heregulin () expression was shown to be the most relevant predictive biomarker for response to patritumab, a fully human anti-epidermal growth factor receptor 3 monoclonal antibody. In support of a phase 2 study of erlotinib ± patritumab in non-small cell lung cancer (NSCLC), a reverse-transcription quantitative polymerase chain reaction (RT-qPCR) assay for relative quantification of expression from formalin-fixed paraffin-embedded (FFPE) NSCLC tissue samples was developed and validated and described herein. Test specimens included matched FFPE normal lung and NSCLC and frozen NSCLC tissue, and -positive and -negative cell lines.

Propafenone for supraventricular arrhythmias in septic shock-Comparison to amiodarone and metoprolol.

Purpose: The occurence of supraventricular arrhythmias associate with an unfavourable prognosis in septic shock. Propafenone could be a feasible antiarrhythmic.

Materials And Methods: Patients collected over a period of 24months were divided into the three groups based on antiarrhythmic: Group1(amiodarone), Group2(propafenone), Group3(metoprolol).

Surface Characterization of Mechanochemically Modified Exfoliated Halloysite Nanoscrolls.

Surface modifications fundamentally influence the morphology of kaolinite nanostructures as a function of crystallinity and the presence of contaminants. Besides morphology, the catalytic properties of 1:1-type exfoliated aluminosilicates are also influenced by the presence of defect sites that can be generated in a controlled manner by mechanochemical activation. In this work, we investigated exfoliated halloysite nanoparticles with a quasi-homogeneous, scroll-type secondary structure toward developing structural/functional relationships for composition, atomic structure, and morphology.

Adsorption of phenolic compounds by organoclays: implications for the removal of organic pollutants from aqueous media.

Montmorillonite (MMT) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were prepared from different surfactants (DDTMA and DDDMA) at different surfactant loadings, and the structural changes in the clays investigated using various techniques. The arrangements of surfactant molecules in the interlayer space was visually aided by molecular mechanical calculation (MM calculation), and the adsorption capacities of MMT and the organoclays for the removal of p-chlorophenol (PCP) and p-nitrophenol (PNP) from aqueous solutions were tested under different conditions.

Activity of the fibroblast growth factor receptor inhibitors dovitinib (TKI258) and NVP-BGJ398 in human endometrial cancer cells.

The recent identification of activating fibroblast growth factor receptor 2 (FGFR2) mutations in endometrial cancer has generated an opportunity for a novel target-based therapy. Here, we explore the therapeutic potential of 2 FGFR inhibitors, the multikinase inhibitor dovitinib (TKI258) and the more selective FGFR inhibitor NVP-BGJ398 for the treatment of endometrial cancer. We examined the effects of both inhibitors on tumor cell growth, FGFR2 signaling, cell cycle, and apoptosis using a panel of 20 molecularly characterized human endometrial cancer cell lines.

Structural characterisation and environmental application of organoclays for the removal of phenolic compounds.

Modified montmorillonite was prepared at different surfactant (HDTMA) loadings through ion exchange. The conformational arrangement of the loaded surfactants within the interlayer space of MMT was obtained by computational modelling. The conformational change of surfactant molecules enhance the visual understanding of the results obtained from characterization methods such as XRD and surface analysis of the organoclays.

Kaolinite-urea complexes obtained by mechanochemical and aqueous suspension techniques--a comparative study.

Intercalation compounds of low- and high-defect kaolinites have been prepared by direct reaction with urea aqueous solution as well as by co-grinding with urea in the absence of water (mechanochemical intercalation). The complexes formed were studied by X-ray diffraction, thermal analysis, DRIFT spectroscopy, and scanning electron microscopy. In aqueous solution the degree of intercalation for the low- and high-defect kaolinites was found to be 77 and 65%, respectively.

Mechanism for hydrotalcite decomposition: a controlled rate thermal analysis study.

The mechanism for the decomposition of hydrotalcite remains unsolved. Controlled rate thermal analysis enables this decomposition pathway to be explored. Hydrotalcites containing carbonate, vanadate and molybdate were prepared by coprecipitation.

Investigation of mechanochemically modified kaolinite surfaces by thermoanalytical and spectroscopic methods.

The effect of mechanochemical activation (dry grinding), formamide intercalation, and thermal deintercalation on high- and low-defect kaolinite surfaces was studied by thermogravimetry and diffuse reflectance Fourier transform infrared spectroscopy. These investigations were completed with specific surface area and pore size distribution measurements. The surface acidity of the ground and the ground-and-intercalated kaolinites was probed with ammonia adsorption.

Modification of kaolinite surfaces through mechanochemical activation with quartz: A diffuse reflectance infrared fourier transform and chemometrics study.

Studies of kaolinite surfaces are of industrial importance. One useful method for studying the changes in kaolinite surface properties is to apply chemometric analyses to the kaolinite surface infrared spectra. A comparison is made between the mechanochemical activation of Kiralyhegy kaolinites with significant amounts of natural quartz and the mechanochemical activation of Zettlitz kaolinite with added quartz.

Complexity of intercalation of hydrazine into kaolinite--a controlled rate thermal analysis and DRIFT spectroscopic study.

Controlled rate thermal analysis (CRTA) allows the separation of adsorbed and intercalated hydrazine. CRTA displays the presence of three different types of hydrogen-bonded hydrazine in the intercalation complex: (a) The first is adsorbed loosely bonded on the kaolinite structure fully expanded by hydrazine-hydrate and liberated between approx 50 and 70 degrees C (b) The second intercalated hydrazine is lost between approx 70 and 85 degrees C. (c) The third type of intercalated-hydrazine molecule is lost in the 85-130 degrees C range.

Deintercalation of hydrazine-intercalated kaolinite in dry and moist air.

The deintercalation of hydrazine-intercalated kaolinite has been followed using a combination of X-ray diffraction and diffuse reflectance Fourier transform infrared spectroscopy. Upon intercalation of the kaolinite with hydrazine, the kaolinite layers are expanded to 10.66 A and remain expanded for up to 22 h upon exposure to moist air.

Surface modification of mechanochemically activated kaolinites by selective leaching.

Low- and high-defect kaolinites mechanochemically activated for different periods of time have been treated with sulfuric acid solution. These modified materials were analyzed using a combination of X-ray diffraction, thermogravimetry, chemical analysis, diffuse reflectance Fourier transform infrared spectroscopy, as well as specific surface area and pore size distribution measurements. In addition to the mechanochemically amorphized part, the disordered and the adequately distorted phases also reacted with sulfuric acid.

Identification of superactive centers in thermally treated formamide-intercalated kaolinite.

The thermal behavior of a formamide-intercalated mechanochemically activated (dry-ground) kaolinite was investigated by thermogravimetry-mass spectrometry (TG-MS) and diffuse reflectance Fourier transform infrared spectroscopy (DRIFT). After the removal of adsorbed and intercalated formamide, a third type of bonded reagent was identified in the temperature range 230-350 degrees C decomposing in situ to CO and NH3. The presence of formamide decomposition products, as well as CO2 and various carbonates identified by DRIFT spectroscopy, indicates the formation of superactive centers as a result of mechanochemical activation and heat treatment (thermal deintercalation).

A spectroscopic study of mechanochemically activated kaolinite with the aid of chemometrics.

The study of kaolinite surfaces is of industrial importance. In this work we report the application of chemometrics to the study of modified kaolinite surfaces. DRIFT spectra of mechanochemically activated kaolinites (Kiralyhegy, Zettlitz, Szeg, and Birdwood) were analyzed using principal component analysis (PCA) and multicriteria decision making (MCDM) methods, PROMETHEE and GAIA.

Modification of low- and high-defect kaolinite surfaces: implications for kaolinite mineral processing.

A comparison is made of the mechanochemical activation of three low- and one high-defect kaolinite using a combination of X-ray diffraction, thermal analysis, and DRIFT spectroscopy. The effect of mechanochemical alteration of the kaolinites is greater for the low-defect kaolinites. The effectiveness of the mechanochemical treatment is represented by the slope of the d(001) peakwidth-grinding time line.

Port access video-assisted proximal anastomosis with the symmetry aortic connector in MIDCABG procedure.

We present an alternative way to create a video-assisted port access proximal anastomosis in the ascending aorta with the Symmetry Bypass System Aortic Connector (St. Jude Medical ATG, St. Paul, MN).

The effect of mechanochemical activation upon the intercalation of a high-defect kaolinite with formamide.

The effect of mechanochemical activation upon the intercalation of formamide into a high-defect kaolinite has been studied using a combination of X-ray diffraction, thermal analysis, and DRIFT spectroscopy. X-ray diffraction shows that the intensity of the d(001) spacing decreases with grinding time and that the intercalated high-defect kaolinite expands to 10.2 A.

Off-pump coronary artery bypass grafting. The 1st Medical Faculty of Charles University study.

Objectives: To explore the surgical technique, anaesthesiological management, immediate and mid-term results, graft patency and effectiveness of less invasive coronary artery bypass grafting through a median sternotomy.

Methods: From January 1998 through December 1999, 144 patients had coronary artery bypass grafting (CABG) without cardiopulmonary bypass (CPB) done by one surgeon through a median sternotomy. The cohort of 107 men and 37 women averaged 60.

A DRIFT spectroscopic study of potassium acetate intercalated mechanochemically activated kaolinite.

Kaolinite has been mechanochemically activated by dry grinding for periods of time up to 10 h. The kaolinite was then intercalated with potassium acetate and the changes in the structure followed by DRIFT spectroscopy. Intercalation of the kaolinite with potassium acetate is difficult and only the layers, which remain hydrogen bonded, are intercalated.