Illuminating Pathways to Dynamic Nanotribology: Light-Mediated Active Control of Interfacial Friction with Nanosuspensions.

Active control of nanotribological properties is a challenge. Materials responsive to external stimuli may catalyze this paradigm shift. Recently, the nanofriction of a thin film is modulated by light, ushering in phototribology.

Tribotronic and electrochemical properties of platinum-nanofluid interfaces formed by aqueous suspensions of 5 and 40 nm TiO2 nanoparticles.

Nanoparticles (NPs) can be highly beneficial as additives to lubricating fluids, and the tribotronic response of charged NPs tuned by external fields represents an area of great technological potential. Tribotronic response, however, is expected to be highly size dependent, which represents a significant design challenge. To explore this issue, quartz crystal microbalance and cyclic voltammetry were employed to characterize nanotribological and electrochemical behavior of platinum-nanofluid interfaces formed by aqueous suspensions of different-sized negatively charged titanium dioxide (TiO2) NPs.

Dynamics of Neutral and Charged Nanodiamonds in Aqueous Media Confined between Gold Surfaces under Normal and Shear Loading.

The dynamics of cubo-octahedral nanodiamonds (NDs) with three different surface treatments and confined in aqueous environments between gold surfaces under shear and normal loading conditions have been characterized via molecular dynamics (MD) simulations. The treatments consisted of carboxyl (-COO) or amino (-NH ) groups attached to the NDs, producing either negatively or positively charged NDs, respectively, and hydrogen-terminated surfaces producing neutral NDs. Simulations were performed in the presence and absence of induced image charges to explore the impact of electrostatic interactions on friction and surface deformation.

Tuning friction and slip at solid-nanoparticle suspension interfaces by electric fields.

We report an experimental Quartz Crystal Microbalance (QCM) study of tuning interfacial friction and slip lengths for aqueous suspensions of TiO and AlO nanoparticles on planar platinum surfaces by external electric fields. Data were analyzed within theoretical frameworks that incorporate slippage at the QCM surface electrode or alternatively at the surface of adsorbed particles, yielding values for the slip lengths between 0 and 30 nm. Measurements were performed for negatively charged TiO and positively charged AlO nanoparticles in both the absence and presence of external electric fields.

Models and Impacts of Science Research Experiences: A Review of the Literature of CUREs, UREs, and TREs.

In efforts to increase scientific literacy and enhance the preparation of learners to pursue careers in science, there are growing opportunities for students and teachers to engage in scientific research experiences, including course-based undergraduate research experiences (CUREs), undergraduate research experiences (UREs), and teacher research experiences (TREs). Prior literature reviews detail a variety of models, benefits, and challenges and call for the continued examination of program elements and associated impacts. This paper reports a comprehensive review of 307 papers published between 2007 and 2017 that include CURE, URE, and TRE programs, with a special focus on research experiences for K-12 teachers.

Interdependent Roles of Electrostatics and Surface Functionalization on the Adhesion Strengths of Nanodiamonds to Gold in Aqueous Environments Revealed by Molecular Dynamics Simulations.

Molecular dynamics simulations demonstrate that adhesion strengths as a function of charge for aqueous nanodiamonds (NDs) interacting with a gold substrate result from an interdependence of electrostatics and surface functionalization. The simulations reveal a water layer containing Na counterions between a negative ND with surface -COO functional groups that is not present for a positively charged ND with -NH functional groups. The closer proximity of the positive ND to the gold surface and the lack of cancelation of electrostatic interactions due to counterions and the water layer lead to an electrostatic adhesion force for the positive ND that is nearly three times larger than that of the negative ND.

A comparative study of the nanoscale and macroscale tribological attributes of alumina and stainless steel surfaces immersed in aqueous suspensions of positively or negatively charged nanodiamonds.

This article reports a comparative study of the nanoscale and macroscale tribological attributes of alumina and stainless steel surfaces immersed in aqueous suspensions of positively (hydroxylated) or negatively (carboxylated) charged nanodiamonds (ND). Immersion in -ND suspensions resulted in a decrease in the macroscopic friction coefficients to values in the range 0.05-0.

Quartz crystal microbalance apparatus for study of viscous liquids at high temperatures.

A design for a Quartz Crystal Microbalance (QCM) setup for use with viscous liquids at temperatures of up to 300 °C is reported. The system response for iron and gold coated QCM crystals to two common lubricant base oils, polyalphaolefin and halocarbon, is reported, yielding results that are consistent with theoretical predictions that incorporate electrode nanoscale surface roughness into their analysis.

Four related diethyl [(arylamino)(4-ethynylphenyl)methyl]phosphonates.

Crystal structures are reported for four related diethyl [(arylamino)(4-ethynylphenyl)lmethyl]phosphonate derivatives, namely diethyl [(4-bromoanilino)(4-ethynylphenyl)methyl]phosphonate, C19H21BrNO3P, (I), diethyl ((4-chloro-2-methylanilino){4-[2-(trimethylsilyl)ethynyl]phenyl}methyl)phosphonate, C23H31ClNO3PSi, (II), diethyl ((4-fluoroanilino){4-[2-(trimethylsilyl)ethynyl]phenyl}methyl)phosphonate, C22H29FNO3PSi, (III), and diethyl [(4-ethynylphenyl)(naphthalen-2-ylamino)methyl]phosphonate, C23H24NO3P, (IV). The conformation of the anilinobenzyl group is very similar in all four compounds. The P-C bond has an approximately staggered conformation, with the aniline and ethynylphenyl groups in gauche positions with respect to the P=O double bond.

Scanning tunneling microscope-quartz crystal microbalance study of temperature gradients at an asperity contact.

Investigations of atomic-scale friction frequently involve setups where a tip and substrate are initially at different temperatures. The temperature of the sliding interface upon contact has thus become a topic of interest. A method for detecting initial tip-sample temperature differences at an asperity contact is described, which consists of a scanning tunneling microscope (STM) tip in contact with the surface electrode of a quartz crystal microbalance (QCM).

Frictional temperature rise in a sliding physisorbed monolayer of Kr/graphene.

A quartz crystal microbalance (QCM) with a graphene/Ni(111) electrode has been used to probe frictional heating effects in Kr monolayers sliding on the microbalance electrode in response to its oscillatory motion. The temperatures of the sliding Kr monolayers are observed to rise approximately 13 K higher than their static counterparts, but show surprisingly little dependence on oscillation amplitude. Although counterintuitive, the observation can be explained by noting that the Kr surface residence times are limited, which effectively caps how much the temperature can rise.

Synthesis of 1,4-disubstituted mono and bis-triazolocarbo-acyclonucleoside analogues of 9-(4-hydroxybutyl)guanine by Cu(I)-catalyzed click azide-alkyne cycloaddition.

A series of novel mono-1,2,3-triazole and bis-1,2,3-triazole acyclonucleoside analogues of 9-(4-hydroxybutyl)guanine was prepared via copper(I)-catalyzed 1,3-dipolar cycloaddition of N-9 propargylpurine, N-1-propargylpyrimidines/as-triazine with the azido-pseudo-sugar 4-azidobutylacetate under solvent-free microwave conditions, followed by treatment with K(2)CO(3)/MeOH, or NH(3)/MeOH. All compounds studied in this work were screened for their antiviral activities [against human rhinovirus (HRV) and hepatitis C virus (HCV)] and antibacterial activities against a series of Gram positive and negative bacteria.

Efficient microwave-assisted synthesis, antibacterial activity and high fluorescence of 5 benzimidazolyl-2'-deoxyuridines.

A series of novel C-5 benzimidazolyl-2'-deoxyuridines was synthesized in good yields under solvent-free conditions and microwave irradiation from 5-formyl-2'-deoxyuridine and arylenediamine derivatives in the presence of NaHSO(3) as catalyst. Their absorption and fluorescence spectra were measured. They showed intense fluorescence around 400-500nm with quantum yields between 0.

Tribo-induced melting transition at a sliding asperity contact.

Observation of a tribo-induced transition from solid to liquidlike behavior is reported for a scanning tunneling microscope tip in sliding contact with an indium electrode of a quartz crystal microbalance (QCM). In particular, at a sufficiently high asperity sliding speed (about 1 m/s) and/or sample temperature, a change in the contact mechanics is observed that is consistent with melting in terms of both the QCM response and an energy analysis. The results confirm that the surface, rather than bulk, melting point temperature is the more relevant quantity for tribological considerations.

Magic-sized diamond nanocrystals.

The 2D structural transformation of a heavily boron-doped diamond surface has been revealed using scanning tunneling microscopy (STM). We found that at boron densities above the metal-insulator transition the diamond surface is comprised of spatially ordered magic-sized nanocrystals. The development of quantized electron gas inside these nanocrystals is directly confirmed by STM observation of standing electron waves.

Gas adsorption on a C60 monolayer.

The adsorption geometry of various gases on top of a C60 monolayer is investigated. The potential energy experienced by an adsorbate atom in the vicinity of a C60 molecule consists of Lennard-Jones interactions integrated over the spherical surface of the molecule. The adsorption potential exhibits strongly attractive sites which lead to a commensurate phase.

Multiscale analysis of liquid lubrication trends from industrial machines to micro-electrical-mechanical systems.

An analytic multiscale expression is derived that yields conditions for effective liquid lubrication of oscillating contacts via surface flow over multiple time and length scales. The expression is a logistics function that depends on two quantities, the fraction of lubricant removed at each contact and a scaling parameter given by the logarithm of the ratio of the contact area to the product of the lubricant diffusion coefficient and the cycle time. For industrial machines the expression confirms the need for an oil mist.

STM, QCM, and the windshield wiper effect: a joint theoretical-experimental study of adsorbate mobility and lubrication at high sliding rates.

We have observed that when mobile adsorbed films of benzene, tricresyl phosphate, and tertiary-butyl phenyl phosphate are present on the surface electrode of a quartz crystal microbalance (QCM), oscillation of the QCM produces clearer scanning tunneling microscope (STM) images of the electrode surface. This is in contrast to an immobile overlayer of iodobenzene, where oscillation of the QCM does not affect image quality. This observation is attributed to a "windshield wiper effect", where at MHz frequencies the tip motion maintains a region of the surface where the absorbate concentration is reduced, which leads to a clearer image.

Superconductivity dependent friction of water, nitrogen, and superheated He films adsorbed on Pb(111).

We report a quartz crystal microbalance study of sliding friction levels in N2, H2O, and superheated He films adsorbed on Pb(111) substrates alternating in and out of the superconducting state. Reductions in friction upon entry into the superconducting state are greater for N2 than He, consistent with a recent theory that linked electronic friction to adsorbate polarizability. Our work also reveals that repetitive cycling of an externally applied magnetic field may impact friction.

C(60) molecular bearings and the phenomenon of nanomapping.

Inspired by suggestions of C(60) "nanobearings," we have measured sliding friction on fixed and rotating C(60) layers to explore whether a lubricating effect is present. We refer to this general phenomenon as "nanomapping," whereby macroscopic attributes are mapped in a one on one fashion to nanoscale entities. Our measurements are the first to directly link friction to a documented molecular rotation state.

Impact of substrate corrugation on the sliding friction levels of adsorbed films.

We report a quartz crystal microbalance (QCM) study of sliding friction for solid xenon monolayers at 77 K on Cu(111), Ni(111), graphene/Ni(111), and C(60) substrates. Simulations have predicted a strong dependence of phononic friction coefficient (eta) on surface corrugation in systems with similar lattice spacing, eta approximately U(2)(0), but this has never before been shown experimentally. In order to make direct comparisons with theory, substrates with similar lattice spacing but varying amplitudes of surface corrugation were studied.

Bridging the gap between macro- and nanotribology: a quartz crystal microbalance study of tricresylphosphate uptake on metal and oxide surfaces.

We report a quartz crystal microbalance study of the nanodynamical properties of tricresylphosphate (TCP) reaction films formed on high purity Fe, Cr, Fe oxide, and Cr oxide surfaces at elevated temperatures. The data reveal trace levels of interfacial slippage, potentially in conjunction with viscoelastic effects, for reaction films characterized by very low macroscopic friction coefficients. In contrast, rigidly attached TCP reaction films are observed in systems characterized by high macroscopic friction coefficients.

Tuning friction with noise and disorder.

We present numerical and experimental evidence which demonstrates that under certain conditions friction can be reduced by spatial disorder and/or thermal noise. We discuss possible mechanisms for this behavior.