Vimentin filaments integrate low-complexity domains in a complex helical structure.

Intermediate filaments (IFs) are integral components of the cytoskeleton. They provide cells with tissue-specific mechanical properties and are involved in numerous cellular processes. Due to their intricate architecture, a 3D structure of IFs has remained elusive.

Upcycling waste derived glass into high-performance photocatalytic scaffolds by alkali activation and direct ink writing.

Novel and eco-friendly solutions are extensively needed for wastewater treatment. This work capitalizes on the combination of waste vitrification and additive manufacturing to produce an efficient photocatalyst for the specific purpose. Fine powders of waste-derived glass, containing Fe3O4 inclusions, by simple suspension (for a solid loading of 65 wt %) in alkaline solution (5 M NaOH), were transformed into pastes for direct ink writing.

Novel glass-based membranes for Cu adsorption: From alkali activation to sintering.

A porous membrane was developed through alkali activation of pharmaceutical boro-alumino-silicate glass powders suspended in diluted NaOH and KOH aqueous solutions (2.5 M). A consolidated porous structure was obtained by the binding of unreacted particles mediated by a surface gel, developed upon drying of the suspensions and their curing at 40 °C for 14 days.

Influence of phosphorylation on intermediate filaments.

The cytoskeleton of eukaryotes consists of actin filaments, microtubules and intermediate filaments (IF). IFs, in particular, are prone to pronounced phosphorylation, leading to additional charges on the affected amino acids. In recent years, a variety of experiments employing either reconstituted protein systems or living cells have revealed that these altered charge patterns form the basis for a number of very diverse cellular functions and processes, including reversible filament assembly, filament softening, network remodeling, cell migration, interactions with other protein structures, and biochemical signaling.

Novel Functional Glass-Ceramic Coatings on Titanium Substrates from Glass Powders and Reactive Silicone Binders.

'Silica-defective glasses', combined with a silicone binder, have been already shown as a promising solution for the manufacturing of glass-ceramics with complex geometries. A fundamental advantage is the fact that, after holding glass powders together from room temperature up to the firing temperature, the binder does not completely disappear. More precisely, it converts into silica when heat-treated in air.

Advanced Dye Sorbents from Combined Stereolithography 3D Printing and Alkali Activation of Pharmaceutical Glass Waste.

Additive manufacturing (AM) technologies enable the fabrication of objects with complex geometries in much simpler ways than conventional shaping methods. With the fabrication of recyclable filters for contaminated waters, the present work aims at exploiting such features as an opportunity to reuse glass from discarded pharmaceutical containers. Masked stereolithography-printed scaffolds were first heat-treated at relatively low temperatures (680 and 730 °C for 1 h) and then functionalized by alkali activation, with the formation of zeolite and sodium carbonate phases, which worked as additional adsorbing centers.

Mechanics of Single Vimentin Intermediate Filaments Under Load.

The eukaryotic cytoskeleton consists of three different types of biopolymers - microtubules, actin filaments, and intermediate filaments - and provides cells with versatile mechanical properties, combining stability and flexibility. The unique molecular structure of intermediate filaments leads to high extensibility and stability under load. With high laser power dual optical tweezers, the mechanical properties of intermediate filaments may be investigated, while monitoring the extension with fluorescence microscopy.

Is Prehospital Assessment of qSOFA Parameters Associated with Earlier Targeted Sepsis Therapy? A Retrospective Cohort Study.

Background: This study aimed to determine whether prehospital qSOFA (quick sequential organ failure assessment) assessment was associated with a shortened 'time to antibiotics' and 'time to intravenous fluid resuscitation' compared with standard assessment.

Methods: This retrospective study included patients who were referred to our Emergency Department between 2014 and 2018 by emergency medical services, in whom sepsis was diagnosed during hospitalization. Two multivariable regression models were fitted, with and without qSOFA parameters, for 'time to antibiotics' (primary endpoint) and 'time to intravenous fluid resuscitation'.

Upcycling of Pharmaceutical Glass into Highly Porous Ceramics: From Foams to Membranes.

The present COVID-19 emergency has dramatically increased the demand for pharmaceutical containers, especially vials. End-of-life containers, however, cannot be easily recycled in the manufacturing of new articles. This paper presents some strategies for upcycling of pharmaceutical glass into various porous ceramics.

Porous Glass Microspheres from Alkali-Activated Fiber Glass Waste.

Fiber glass waste (FGW) was subjected to alkali activation in an aqueous solution with different concentrations of sodium/potassium hydroxide. The activated materials were fed into a methane-oxygen flame with a temperature of around 1600 °C. X-ray diffraction analysis confirmed the formation of several hydrated compounds, which decomposed upon flame synthesis, leading to porous glass microspheres (PGMs).

3D Printing of Hierarchically Porous Lattice Structures Based on Åkermanite Glass Microspheres and Reactive Silicone Binder.

The present study illustrates the manufacturing method of hierarchically porous 3D scaffolds based on åkermanite as a promising bioceramic for stereolithography. The macroporosity was designed by implementing 3D models corresponding to different lattice structures (cubic, diamond, Kelvin, and Kagome). To obtain micro-scale porosity, flame synthesized glass microbeads with 10 wt% of silicone resins were utilized to fabricate green scaffolds, later converted into targeted bioceramic phase by firing at 1100 °C in air.

Up-Cycling of LCD Glass by Additive Manufacturing of Porous Translucent Glass Scaffolds.

Additive manufacturing technologies, compared to conventional shaping methods, offer great opportunities in design versatility, for the manufacturing of highly porous ceramic components. However, the application to glass powders, later subjected to viscous flow sintering, involves significant challenges, especially in shape retention and in the achievement of a substantial degree of translucency in the final products. The present paper disclosed the potential of glass recovered from liquid crystal displays (LCD) for the manufacturing of highly porous scaffolds by direct ink writing and masked stereolithography of fine powders mixed with suitable organic additives, and sintered at 950 °C, for 1-1.

Post-translational modifications soften vimentin intermediate filaments.

The mechanical properties of biological cells are determined by the cytoskeleton, a composite biopolymer network consisting of microtubules, actin filaments and intermediate filaments (IFs). By differential expression of cytoskeletal proteins, modulation of the network architecture and interactions between the filaments, cell mechanics may be adapted to varying requirements on the cell. Here, we focus on the intermediate filament protein vimentin and introduce post-translational modifications as an additional, much faster mechanism for mechanical modulation.

Multi-targeted B and Co co-doped 45S5 bioactive glasses with angiogenic potential for bone regeneration.

Many elements, such as copper, cobalt (Co), strontium, magnesium and boron (B) have been used for single or multiple doping of bioactive glasses to promote angiogenesis during bone regeneration. However, few works have focused on promoting angiogenesis through stimulating several different signalling pathways which can be called a multi-target approach. In this study, 45S5 bioactive glass (BG) co-doped with B and Co was prepared by conventional melt quenching method.

Lateral Subunit Coupling Determines Intermediate Filament Mechanics.

The cytoskeleton is a composite network of three types of protein filaments, among which intermediate filaments (IFs) are the most extensible ones. Two very important IFs are keratin and vimentin, which have similar molecular architectures but different mechanical behaviors. Here we compare the mechanical response of single keratin and vimentin filaments using optical tweezers.

Vimentin Intermediate Filaments Undergo Irreversible Conformational Changes during Cyclic Loading.

Intermediate filaments (IFs) are part of the cytoskeleton of eukaryotic cells and, therefore, are largely responsible for the cell's mechanical properties. IFs are characterized by a pronounced extensibility and remarkable resilience that enable them to support cells in extreme situations. Previous experiments showed that, under strain, α-helices in vimentin IFs might unfold to β-sheets.

Crystallization and visible-near-infrared luminescence of Bi-doped gehlenite glass.

Gehlenite glass microspheres, doped with a different concentration of Bi ions (0.5, 1, 3 mol%), were prepared by a combination of solid-state reaction followed by flame synthesis. The prepared glass microspheres were characterized from the point of view of surface morphology, phase composition, thermal and photoluminescence (PL) properties by optical and scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and PL spectroscopy.

Optomechanical measurement of the role of lamins in whole cell deformability.

There is mounting evidence that the nuclear envelope, and particularly the lamina, plays a critical role in the mechanical and regulation properties of the cell and changes to the lamina can have implications for the physical properties of the whole cell. In this study we demonstrate that the optical stretcher can measure changes in the time-dependent mechanical properties of living cells with different levels of A-type lamin expression. Results from the optical stretcher shows a decrease in the deformability of cells as the levels of lamin A increases, for cells which grow both adherently and in suspension.

Quantitative EDXS: Influence of geometry on a four detector system.

The influence of the geometry on quantitative energy dispersive X-ray spectrometry (EDXS) analysis is determined for a ChemiSTEM system (Super-X) in combination with a low-background double-tilt specimen holder. For the first time a combination of experimental measurements with simulations is used to determine the positions of the individual detectors of a Super-X system. These positions allow us to calculate the detector's solid angles and estimate the amount of detector shadowing and its influence on quantitative EDXS analysis, including absorption correction using the ζ-factor method.

Switching from weakly to strongly limited injection in self-aligned, nano-patterned organic transistors.

Organic thin-film transistors for high frequency applications require large transconductances in combination with minimal parasitic capacitances. Techniques aiming at eliminating parasitic capacitances are prone to produce a mismatch between electrodes, in particular gaps between the gate and the interlayer electrodes. While such mismatches are typically undesirable, we demonstrate that, in fact, device structures with a small single-sided interlayer electrode gap directly probe the detrimental contact resistance arising from the presence of an injection barrier.

Tunable Semicrystalline Thin Film Cellulose Substrate for High-Resolution, In-Situ AFM Characterization of Enzymatic Cellulose Degradation.

In the field of enzymatic cellulose degradation, fundamental interactions between different enzymes and polymorphic cellulose materials are of essential importance but still not understood in full detail. One technology with the potential of direct visualization of such bioprocesses is atomic force microscopy (AFM) due to its capability of real-time in situ investigations with spatial resolutions down to the molecular scale. To exploit the full capabilities of this technology and unravel fundamental enzyme-cellulose bioprocesses, appropriate cellulose substrates are decisive.

Cyanoindole derivatives as highly selective dopamine D(4) receptor partial agonists: solid-phase synthesis, binding assays, and functional experiments.

Traceless linking of diethoxymethyl (DEM)-protected 5- and 6-cyanoindoles and subsequent incorporation of phenylpiperazine derivatives led to the 2- and 3-piperazinylmethyl-substituted cyanoindoles 3a-m. Dopamine receptor binding studies on the final products 3a-m clearly indicated strong and selective recognition of the D(4) subtype which is known as a promising target for the treatment of neuropsychiatric disorders. The most interesting binding properties were observed for the 2-aminomethyl-5-cyanoindoles FAUC 299 (3f) and FAUC 316 (3j) (K(i) = 0.

Azepino- and diazepinoindoles: synthesis and dopamine receptor binding profiles.

Starting from the readily available building blocks 7, 10, 11, and 15, the synthesis of the fused indoles 1, 2, 5, and 6, respectively, is reported. The syntheses involved Pictet-Spengler cyclizations, Michael addition reactions, lactamization, directed metallation, and reductive amination as the key reaction steps. Radioligand displacement studies comprising the dopamine receptor subtypes D1, D2long D2short, D3, and D4.