Functionalization of silk with actinomycins from s BV365 for biomedical applications.

Silk, traditionally acclaimed as the "queen of fiber," has been widely used thanks to its brilliant performance such as gentleness, smoothness and comfortableness. Owing to its mechanical characteristics and biocompatibility silk has a definitive role in biomedical applications, both as fibroin and fabric. In this work, the simultaneous dyeing and functionalization of silk fabric with pigments from BV365 were investigated.

Properties and environmental sustainability of fungal chitin nanofibril reinforced cellulose acetate films and nanofiber mats by solution blow spinning.

Materials from biological origin composed by renewable carbon facilitate the transition from linear carbon-intensive economy to a sustainable circular economy. Accordingly, we use solution blow spinning to develop fully biobased cellulose acetate films and nanofiber mats reinforced with fungal chitin nanofibrils (ChNFs), an emerging bio-colloid with lower carbon footprint compared to crustacean-derived nanochitin. This study incorporates fungal ChNFs into spinning processes for the first time.

"Nano in Nano"-Incorporation of ZnO Nanoparticles into Cellulose Acetate-Poly(Ethylene Oxide) Composite Nanofibers Using Solution Blow Spinning.

In this work, the preparation and characterization of composites from cellulose acetate (CA)-poly(ethylene oxide) (PEO) nanofibers (NFs) with incorporated zinc oxide nanoparticles (ZnO-NPs) using solution blow spinning (SBS) is reported. CA-PEO nanofibers were produced by spinning solution that contained a higher CA-to-PEO ratio and lower (equal) CA-to-PEO ratio. Nanoparticles were added to comprise 2.

Effect of Collector Rotational Speed on the Morphology and Structure of Solution Blow Spun Polylactic Acid (PLA).

Apart from structure and composition, morphology plays a significant role in influencing the performance of materials in terms of both bulk and surface behavior. In this work, polylactic acid (PLA) constituted by submicrometric fibers is prepared. Using a modified electrospinning (ES) device to carry out solution blow spinning (SBS), the fibrillar morphology is modified, with the aim to induce variations in the properties of the material.

Solution blow co-spinning of cellulose acetate with poly(ethylene oxide). Structure, morphology, and properties of nanofibers.

Cellulose acetate (CA) nanofibers are prepared using solution blow co-spinning (SBS) with poly(ethylene oxide) (PEO). The pure CA membranes are obtained by washing water-soluble PEO from the fibrous CA-PEO blend. Nanofibrous membranes are characterized using optical and scanning electron microscopy (SEM), differential scanning calorimetry (DSC), infrared spectroscopy (ATR-FTIR), and surface zeta potential measurements.

Active Cellulose Acetate/Chitosan Composite Films Prepared Using Solution Blow Spinning: Structure and Electrokinetic Properties.

Cellulose acetate (CA), a very promising derivative of cellulose, has come into the focus of research due to its highly desired good film-forming ability for food packaging applications. Frequently, this derivative is used in combination with other compounds (polymers, nanoparticles) in order to obtain active materials. Here, we report the preparation of thin films made of cellulose acetate loaded with chitosan (CS) using the solution blow spinning (SBS) method.

Obtaining Medical Textiles Based on Viscose and Chitosan/Zinc Nanoparticles with Improved Antibacterial Properties by Using a Dielectric Barrier Discharge.

This study aimed to obtain functional viscose textiles based on chitosan coatings with improved antibacterial properties and washing durability. For that reason, before functionalization with chitosan/zinc nanoparticles (NCH+Zn), the viscose fabric was modified by nonthermal gas plasma of dielectric barrier discharge (DBD) to introduce into its structure functional groups suitable for attachment of NCH+Zn. NCH+Zn were characterized by measurements of hydrodynamic diameter and zeta potential and AFM.

Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review.

In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers.

Iso- and Anisotropic Etching of Micro Nanofibrillated Cellulose Films by Sequential Oxygen and Nitrogen Gas Plasma Exposure for Tunable Wettability on Crystalline and Amorphous Regions.

The surface of cellulose films, obtained from micro nanofibrillated cellulose produced with different enzymatic pretreatment digestion times of refined pulp, was exposed to gas plasma, resulting in a range of surface chemical and morphological changes affecting the mechanical and surface interactional properties. The action of separate and dual exposure to oxygen and nitrogen cold dielectric barrier discharge plasma was studied with respect to the generation of roughness (confocal laser and atomic force microscopy), nanostructural and chemical changes on the cellulose film surface, and their combined effect on wettability. Elemental analysis showed that with longer enzymatic pretreatment time the wetting response was sensitive to the chemical and morphological changes induced by both plasma gases, but distinctly oxygen plasma was seen to induce much greater morphological change while nitrogen plasma contributed more to chemical modification of the film surface.

Effect of plasma treatment on chemical composition, structure and sorption properties of lignocellulosic hemp fibers (Cannabis sativa L.).

Hemp fibers with different amount of hemicelluloses and lignin were subjected to atmospheric pressure dielectric barrier discharge under different conditions (40 W and 80 W power of discharge, const. time 120 s) in order to study influence of plasma treatment on their structure and sorption properties. Wettability of plasma treated samples, compared with precursors, increased due to the changes in hemp fiber surface chemistry confirmed by ATR FTIR spectroscopy and increased roughness as a consequence of intensive surface etching, observed by SEM.

Goodness-of-fit test for monotone proportional subdistribution hazards assumptions based on weighted residuals.

Recently goodness-of-fit tests have been proposed for checking the proportional subdistribution hazards assumptions in the Fine and Gray regression model. Zhou, Fine, and Laird proposed weighted Schoenfeld-type residuals tests derived under an assumed model with specific form of time-varying regression coefficients. Li, Sheike, and Zhang proposed an omnibus test based on cumulative sums of Schoenfeld-type residuals.

Statistical controversies in clinical research: should schedules of tumor size assessments be changed?

Background: Time to progression (TTP) is often used as a primary end point in phase II clinical trials. Since the actual date of nadir and progression is never known, most calculated TTP are overestimated. This study evaluates the imprecision on the estimate of TTP under two hypothetical tumor kinetic settings and various assessment schedules.

A Statistical Approach to Determine the Optimal Duration of Post-Treatment Follow-Up: Application to Metastatic Nonseminomatous Germ Cell Tumors.

Background: The objective of this study was to present a statistical method to define an optimal duration of follow-up for patients in remission after treatment for cancer, for detection of recurrences.

Patients And Methods: Surveillance duration was estimated using the 2-step approach proposed by Mould et al. Relapse-free interval was modeled using the parametric cure model proposed by Boag.

Survival, safety, and prognostic factors for outcome with Regorafenib in patients with metastatic colorectal cancer refractory to standard therapies: results from a multicenter study (REBECCA) nested within a compassionate use program.

Background: Randomized trials have shown a survival benefit for regorafenib over placebo in patients with metastatic colorectal cancer (mCRC) that progressed after standard therapies. We evaluated survival and safety outcomes in patients treated with regorafenib in a real-life setting.

Methods: REBECCA is a cohort study nested within a compassionate use program designed to evaluate survival, safety, and potential prognostic factors for outcome associated with regorafenib in patients with mCRC refractory to standard therapies.

Preoperative chemoradiation with paclitaxel-carboplatin or with fluorouracil-oxaliplatin-folinic acid (FOLFOX) for resectable esophageal and junctional cancer: the PROTECT-1402, randomized phase 2 trial.

Background: Often curative treatment for locally advanced resectable esophageal or gastro-esophageal junctional cancer consists of concurrent neoadjuvant radiotherapy and chemotherapy followed by surgery. Currently, one of the most commonly used chemotherapy regimens in this setting is a combination of a fluoropyrimidin and of a platinum analogue. Due to the promising results of the recent CROSS trial, another regimen combining paclitaxel and carboplatin is also widely used by European and American centers.

Radiation-induced CD8 T-lymphocyte Apoptosis as a Predictor of Breast Fibrosis After Radiotherapy: Results of the Prospective Multicenter French Trial.

Background: Monocentric cohorts suggested that radiation-induced CD8 T-lymphocyte apoptosis (RILA) can predict late toxicity after curative intent radiotherapy (RT). We assessed the role of RILA as a predictor of breast fibrosis (bf +) after adjuvant breast RT in a prospective multicenter trial.

Methods: A total of 502 breast-cancer patients (pts) treated by conservative surgery and adjuvant RT were recruited at ten centers.

First-Line Chemotherapy for Metastatic Esophageal Squamous Cell Carcinoma: Clinico-Biological Predictors of Disease Control.

Objective: This study aimed to identify predictors of tumor control (TC) in metastatic esophageal squamous cell carcinoma patients receiving first-line chemotherapy.

Methods: A development cohort of 68 patients from a prospective multicenter trial (NCT01248299) was used to identify predictors of TC at first radiological tumor assessment and to generate a predictive score for TC. That score was applied in an independent retrospective single-center validation cohort of 60 consecutive patients.

Sentinel lymph node identification using superparamagnetic iron oxide particles versus radioisotope: The French Sentimag feasibility trial.

Background And Objectives: The French Sentimag feasibility trial evaluated a new method for the localization of breast cancer sentinel lymph node (SLN) using Sienna+®, superparamagnetic iron oxide particles, and Sentimag® detection in comparison to the standard technique (isotopes ± blue dye).

Methods: We conducted a prospective multicentric paired comparison trial on 115 patients. SLN localization was performed using both the magnetic technique and the standard method.

Analysis of survival adjusted for quality of life using the Q-TWiST function: Interface in R.

Objective: The analysis of treatment effects in clinical trials usually focus on efficacy and safety in separate descriptive statistical analyses. The Q-TWiST (Quality adjusted Time Without Symptoms and Toxicity) method has been proposed by Gelber in the 90s to enable a statistical comparison between two groups with a graphical representation by incorporating benefit and risk into a single analysis. Although the method has been programmed in SAS, it is rarely used.

Brain Metastases in Patients With Germ Cell Tumors: Prognostic Factors and Treatment Options--An Analysis From the Global Germ Cell Cancer Group.

Purpose: To define characteristics, treatment response, and outcomes of men with brain metastases (BM) from germ cell tumors (GCT).

Patients And Methods: Data from 523 men with BM from GCT were collected retrospectively from 46 centers in 13 countries by using standardized questionnaires. Clinical features were correlated with overall survival (OS) as the primary end point.

Guidelines for the definition of time-to-event end points in renal cell cancer clinical trials: results of the DATECAN project†.

Background: In clinical trials, the use of intermediate time-to-event end points (TEEs) is increasingly common, yet their choice and definitions are not standardized. This limits the usefulness for comparing treatment effects between studies. The aim of the DATECAN Kidney project is to clarify and recommend definitions of TEE in renal cell cancer (RCC) through a formal consensus method for end point definitions.

ERCC1 and CYP1B1 polymorphisms as predictors of response to neoadjuvant chemotherapy in estrogen positive breast tumors.

Purpose: Neoadjuvant chemotherapy (NCT) using anthracyclines and taxanes is a standard treatment for locally advanced breast cancer. Efficacy of NCT is however variable among patients and predictive markers are expected to guide the selection of patients who will benefit from NCT. A promising approach stand with polymorphisms located in genes encoding drug transporters, drug metabolizing enzymes and target genes which can affect drug efficacy.

Cardiac toxicity events in the PHARE trial, an adjuvant trastuzumab randomised phase III study.

Background: This article reports, the cardiac toxicity according to 6- versus 12-month durations of adjuvant trastuzumab in PHARE randomised trial (NCT00381901).

Patients And Methods: Cardiac follow-up and Left Ventricular Ejection Fraction (LVEF) assessment by echocardiography or multigated acquisition scan were performed every 3 months while patients received trastuzumab and after completion of treatment over the first 2 years and every 6 months afterwards. The primary cardiac end-point was Cardiac Heart Failure (CHF) defined as New York Heart Association (NYHA) class III or IV.