Hydrodynamic characteristics of the helical flow pump.

The helical flow pump (HFP) was invented to be an ideal pump for developing the TAH and the helical flow TAH (HFTAH) using two HFPs has been developed. However, since the HFP is quite a new pump, hydrodynamic characteristics inside the pump are not clarified. To analyze hydrodynamic characteristics of the HFP, flow visualization study using the particle image velocimetry and computational fluid dynamics analysis were performed.

Computational fluid dynamics analysis of the pump parameters in the helical flow pump.

The helical flow pump (HFP) was invented to develop a total artificial heart at the University of Tokyo in 2005. The HFP consists of the multi-vane impeller involving rotor magnets, a motor stator and pump housing having double-helical volutes. To investigate the characteristics of the HFP, computational fluid dynamics analysis was performed.

Emergency Life Support System aiming preprimed oxygenator.

Development have been achieved of a new blood pump for next generation Percutaneous Cardio-Pulmonary Support (PCPS) system and a novel surface coating method for silicone membrane hollow fiber by physical adsorption using a copolymer composed of a 2-Methacryloyloxyethyl phosphorylcholine (MPC) unit and a hydrophobic unit. The new blood pump, named the Troidal Convolution Pump (TCP), is based on the principle of a cascade pump and perfused 5 L/min and 350 mmHg at 2450 rpm. The novel copolymer composed of 30% MPC unit and 3-(methacryloyloxy) propyltris (trimethylsiloxy) silane (MPTSSi) unit (PMMSi30) was the most suitable molecular design on a silicone surface.

Pulsatile driving of the helical flow pump.

The helical flow pump (HFP) is newly developed blood pomp for total artificial heart (TAH). HFP can work with lower rotational speed than axial and centrifugal blood pump. It can be seen reasonable feature to generate pulsatile flow because high response performance can be realized.

The helical flow total artificial heart: implantation in goats.

To realize a total artificial heart (TAH) with high performance, high durability, good anatomical fitting, and good blood compatibility, the helical flow TAH (HFTAH) has been developed with two helical flow pumps having hydrodynamic levitation impeller. The HFTAH was implanted in goats to investigate its anatomical fitting, blood compatibility, mechanical stability, control stability, and so on. The size of the HFTAH was designed to be 80 mm in diameter and 84 mm wide.

Effect of a bearing gap on hemolytic property in a hydrodynamically levitated centrifugal blood pump with a semi-open impeller.

We have developed a hydrodynamically levitated centrifugal blood pump with a semi-open impeller for long-term circulatory assist. The pump uses hydrodynamic bearings to enhance durability and reliability without additional displacement-sensors or control circuits. However, a narrow bearing gap of the pump has a potential for hemolysis.

The helical flow pump with a hydrodynamic levitation impeller.

The helical flow pump (HFP) is a novel rotary blood pump invented for developing a total artificial heart (TAH). The HFP with a hydrodynamic levitation impeller, which consists of a multi-vane impeller involving rotor magnets, stator coils at the core position, and double helical-volute pump housing, was developed. Between the stator and impeller, a hydrodynamic bearing is formed.

Results of animal experiments with the fourth model of the undulation pump total artificial heart.

Animal experiments using a total artificial heart in a goat are not easy to perform. The fourth model of the undulation pump total artificial heart (UPTAH4), which was designed to perform a long-term physiological experiment including pulsatile and nonpulsatile TAH operations with a conductance- and arterial pressure-based control method named 1/R control, was implanted in 31 goats weighing 38.5 to 60.

Automatic calibration of the inlet pressure sensor for the implantable continuous-flow ventricular assist device.

Significant progress in the development of implantable ventricular assist devices using continuous-flow blood pumps has been made recently. However, a control method has not been established. The blood pressure in the inflow cannula (inlet pressure) is one of the candidates for performing an adequate control.

Japanese guidance for ventricular assist devices/total artificial hearts.

To facilitate research and development (R&D) and to expedite the review processes of medical devices, the Ministry of Health, Labor and Welfare (MHLW) and the Ministry of Economy, Trade and Industry (METI) founded a joint committee to establish guidance for newly emerging technology. From 2005 to 2007, two working groups held discussions on ventricular assist devices and total artificial hearts, including out-of-hospital programs, based on previous guidance documents and standards. Based on this discussion, the METI published the R&D Guidelines for innovative artificial hearts in 2007, and in 2008 the MHLW published a Notification by Director regarding the evaluation criteria for emerging technology.

Outline of the International Organization for Standardization Standard for Circulatory Support Devices (ISO 14708-5).

The rapid progress of artificial heart and circulatory support devices enables us to apply them to severe heart failure patients. Many types of circulatory support devices have been developed in the United States, Europe, and Japan. This situation urged the establishment of an International Organization for Standardization (ISO) Standard for the circulatory support devices.

Use of in vivo insert molding to form a jellyfish valve leaflet.

We developed an in vivo insert molding technique to form tissue-derived biomaterials into the desired shape, and with sufficient strength and durability, for use in artificial organs. Molds of acrylic resin with inserted velour cloth were implanted under the skin of goats to form a circular leaflet for a jellyfish valve. The valve leaflets were successfully produced in the molds after 17-60 days.

Baroreflex sensitivity of an arterial wall during rotary blood pump assistance.

It is well known that the baroreflex system is one of the most important indicators of the pathophysiology in hypertensive patients. We can check the sensitivity of the baroreflex by observing heart rate (HR) responses; however, there is no simple diagnostic method to measure the arterial behavior in the baroreflex system. Presently, we report the development of a method and associated hardware that enables the diagnosis of baroreflex sensitivity by measuring the responses of both the heart and the artery.

Analysis of baroreflex sensitivity during undulation pump ventricular assist device support.

The aim of this study was to examine the baroreflex sensitivity (BRS), which involves the autonomic nervous system, in a goat with a chronically implanted undulation pump ventricular assist device (UPVAD). The UPVAD involved transforming the rotation of a brushless DC motor into an undulating motion by a disc attached via a special linking mechanism, and a jellyfish valve in the outflow cannula to prevent diastolic backflow. The pump was implanted into the thoracic cavity of a goat by a left thoracotomy, and the inflow and outflow cannulae were sutured to the apex of the left ventricle and to the descending aorta, respectively.

A nonpulsatile total artificial heart with 1/R control.

A total artificial heart (TAH) using continuous flow pumps is promising for size reduction of the device; however, the role of pulsatility in TAHs has been a subject of great debate. Additionally, it is unclear whether, in a nonpulsatile TAH, a physiological control method such as 1/R control can keep the experimental animal in good condition. To realize a nonpulsatile TAH with 1/R control, the artificial valves were removed from undulation pump total artificial hearts (UPTAHs), which can produce both pulsatile and nonpulsatile flows using a single device.

Domestic and foreign trends in the prevalence of heart failure and the necessity of next-generation artificial hearts: a survey by the Working Group on Establishment of Assessment Guidelines for Next-Generation Artificial Heart Systems.

A series of guidelines for development and assessment of next-generation medical devices has been drafted under an interagency collaborative project by the Ministry of Health, Labor and Welfare and the Ministry of Economy, Trade and Industry. The working group for assessment guidelines of next-generation artificial hearts reviewed the trend in the prevalence of heart failure and examined the potential usefulness of such devices in Japan and in other countries as a fundamental part of the process of establishing appropriate guidelines. At present, more than 23 million people suffer from heart failure in developed countries, including Japan.

Acute and chronic consequences of non-pulsatile blood flow pattern in long-term total artificial heart experiment.

Vessel pulsation is presumably a key physiological function for the optimal supply of peripheral tissues and vital organs by oxygen and nutrients. The absence of pulsatility might impair the peripheral perfusion stability and trigger microvascular dysfunction of vital organs. The main purpose of this study was to investigate the influence of non-pulsatile flow on the microcirculation in experimental goat with implanted undulation pump total artificial heart (UPTAH).

Analysis of heat generation of lithium ion rechargeable batteries used in implantable battery systems for driving undulation pump ventricular assist device.

We have developed internal battery systems for driving an undulation pump ventricular assist device using two kinds of lithium ion rechargeable batteries. The lithium ion rechargeable batteries have high energy density, long life, and no memory effect; however, rise in temperature of the lithium ion rechargeable battery is a critical issue. Evaluation of temperature rise by means of numerical estimation is required to develop an internal battery system.

Development of mechanical circulatory support devices at the University of Tokyo.

The development of mechanical circulatory support devices at the University of Tokyo has focused on developing a small total artificial heart (TAH) since achieving 532 days of survival of an animal with a paracorporial pneumatically driven TAH. The undulation pump was invented to meet this purpose. The undulation pump total artificial heart (UPTAH) is an implantable TAH that uses an undulation pump.

Electrical stimulation of skeletal muscles. An alternative to aerobic exercise training in patients with chronic heart failure?

The aim of this study was to investigate whether electrical stimulation of skeletal muscles could represent a rehabilitation alternative for patients with chronic heart failure (CHF). Thirty patients with CHF and NYHA class II-III were randomly assigned to a rehabilitation program using either electrical stimulation of skeletal muscles or bicycle training. Patients in the first group (n = 15) had 8 weeks of home-based low-frequency electrical stimulation (LFES) applied simultaneously to the quadriceps and calf muscles of both legs (1 h/day for 7 days/week); patients in the second group (n = 15) underwent 8 weeks of 40 minute aerobic exercise (3 times a week).

Numerical estimation of heat distribution from the implantable battery system of an undulation pump LVAD.

We have been developing an implantable battery system using three series-connected lithium ion batteries having an energy capacity of 1,800 mAh to drive an undulation pump left ventricular assist device. However, the lithium ion battery undergoes an exothermic reaction during the discharge phase, and the temperature rise of the lithium ion battery is a critical issue for implantation usage. Heat generation in the lithium ion battery depends on the intensity of the discharge current, and we obtained a relationship between the heat flow from the lithium ion battery q(c)(I) and the intensity of the discharge current I as q(c)(I) = 0.

Influence of flow design on microcirculation in conditions of undulation pump-left ventricle assist device testing.

To study the microvessels in bulbar conjunctiva, we conducted an experiment in goat with a pneumatically driven left heart bypass pump, which was replaced with an undulation pump-left ventricle assist device for 9 days. Three flow patterns were tested: complete pulsatile, continuous, and percentage of pulsatile. We studied the morphology of arterioles and venules of the bulbar conjunctiva using photograph records.

Development of integrated electronics unit for drive and control of undulation pump-left ventricular assist device.

In this study, we have developed an implantable electronics unit (IEU) for driving an undulation pump-left ventricular assist device (UP-LVAD). The IEU consists of a pump driver, three series-connected lithium ion batteries (1800 mAh), a charger, and a transcutaneous information transmission system. These electronic subunits were encapsulated in a case (110 x approximately 80 x approximately 30 mm) made of epoxy resin.

Estimation of early-stage malfunction using implantable artificial heart sound in animal experiments.

We have developed an automatic diagnosis system of an artificial heart in order to ensure the safety of the patient implanted with the artificial heart. The automatic diagnosis system is composed of an electro-stethoscope system, adaptive noise canceller (ANC), and artificial neural network (ANN). The ANC effectively eliminates ambient noise from the sound signal of the artificial heart detected by the electro-stethoscope, and a filtered sound signal is separated into each frequency components by fast Fourier transformation.

Artificial heart research and present status of clinical application in Japan.

Japan has a long history of research and development of the artificial heart since Atsumi began studying artificial hearts at the University of Tokyo in 1959. Since that time, the University of Tokyo group has been developing different types of artificial hearts, as well as materials, blood pumps, driving mechanisms, and control methods. Other than the University of Tokyo, there are 12 institutes involved in artificial heart research and development in Japan.