Progress and Challenges of Vanadium Oxide Cathodes for Rechargeable Magnesium Batteries.

Among the challenges related to rechargeable magnesium batteries (RMBs) still not resolved are positive electrode materials with sufficient charge storage and rate capability as well as stability and raw material resources. Out of the materials proposed and studied so far, vanadium oxides stand out for these requirements, but significant further improvements are expected and required. They will be based on new materials and an improved understanding of their mode of operation.

Reliability Study of Metal-Oxide Semiconductors in Integrated Circuits.

This paper is devoted to the study of CMOS IC parameter degradation during reliability testing. The paper presents a review of literature data on the issue of the reliability of semiconductor devices and integrated circuits and the types of failures leading to the degradation of IC parameters. It describes the tests carried out on the reliability of controlled parameters of integrated circuit TPS54332, such as quiescent current, quiescent current in standby mode, resistance of the open key, and instability of the set output voltage in the whole range of input voltages and in the whole range of load currents.

Reuse and Mechanochemical Processing of Ore Dressing Tailings Used for Extracting Pb and Zn.

The increasing accumulation of rock waste obtained due to ore processing and its environmental impacts, such as acid mine drainage and elevated concentrations of heavy metals in soils, necessitates the transformation of mining technologies based on the concept of circular waste management. The research is aimed at improving the parameters of the mechanical activation effect produced on technogenic georesources, as well as at expanding the application scope of disintegrators in the field of using the partial backfill of the mined-out space when developing stratified deposits. In this regard, the research purpose was to substantiate the parameters of extracting metals from enrichment tailings using their mechanochemical activation to ensure cyclic waste management.

Improvement of Hybrid Electrode Material Synthesis for Energy Accumulators Based on Carbon Nanotubes and Porous Structures.

Carbon materials are promising for use as electrodes for supercapacitors and lithium-ion batteries due to a number of properties, such as non-toxicity, high specific surface area, good electronic conductivity, chemical inertness, and a wide operating temperature range. Carbon-based electrodes, with their characteristic high specific power and good cyclic stability, can be used for a new generation of consumer electronics, biomedical devices and hybrid electric vehicles. However, most carbon materials, due to their low electrical conductivity and insufficient diffusion of electrolyte ions in complex micropores, have energy density limitations in these devices due to insufficient number of pores for electrolyte diffusion.

Development and Testing of the Thermoelectric Thermal Energy Conversion Device in the Conditions of Existing Aluminum Production.

The aim of the work is to develop an energy-saving device that provides the conversion of thermal energy into electrical energy. The design and materials of the thermoelectric converter unit, consisting of 12 thermoelectric converter modules, a cooling radiator and a switching unit, were developed and selected. Based on the test results, the zone of the maximum temperatures in the section of the gas duct recommended for the installation of a gas cooling module using a thermoelectric converter was determined.

Vanadium Oxide-Poly(3,4-ethylenedioxythiophene) Nanocomposite as High-Performance Cathode for Aqueous Zn-Ion Batteries: The Structural and Electrochemical Characterization.

In this work the nanocomposite of vanadium oxide with conducting polymer poly(3,4-ethylenedioxythiophene) (VO@PEDOT) was obtained by microwave-assisted hydrothermal synthesis. The detailed study of its structural and electrochemical properties as cathode of aqueous zinc-ion battery was performed by scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction analysis, X-ray photoelectron spectroscopy, thermogravimetric analysis, cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The initial VO@PEDOT composite has layered nanosheets structure with thickness of about 30-80 nm, which are assembled into wavy agglomerated thicker layers of up to 0.

Interactions in Electrodeposited Poly-3,4-Ethylenedioxythiophene-Tungsten Oxide Composite Films Studied with Spectroelectrochemistry.

Cyclic voltammograms and optical absorption spectra of PEDOT/WO composite films were recorded in order to identify possible interactions and modes of improved performance of the composite as compared to the single materials. Changes in the shape of redox peaks related to the W(VI)/W(V) couple in the CVs of WO and the composite PEDOT/WO films indicate electrostatic interactions between the negatively charged tungsten oxide species and the positively charged conducting polymer. Smaller peak separation suggests a more reversible redox process due to the presence of the conducting polymer matrix, accelerating electron transfer between tungsten ions.

Green Bank and Effelsberg Radio Telescope Searches for Axion Dark Matter Conversion in Neutron Star Magnetospheres.

Axion dark matter (DM) may convert to radio-frequency electromagnetic radiation in the strong magnetic fields around neutron stars. The radio signature of such a process would be an ultranarrow spectral peak at a frequency determined by the mass of the axion particle. We analyze data we collected from the Robert C.

Interfacial engineering by creating Cu-based ternary heterostructures on CN tubes towards enhanced photocatalytic oxidative coupling of benzylamines.

Benzylamine coupling is a very important reaction for the synthesis of imine but still faces many challenges. Herein, we present a highly effective strategy towards the coupling reaction by using environmentally friendly catalysts. These catalysts are composed of Cu/CuO/CuN heterostructures supported by CN tubes and the composites were synthesized by one-step hydrothermal treatment followed by calcination.

D-Meson Azimuthal Anisotropy in Midcentral Pb-Pb Collisions at sqrt[s]_{NN}=5.02 TeV.

The azimuthal anisotropy coefficient v_{2} of prompt D^{0}, D^{+}, D^{*+}, and D_{s}^{+} mesons was measured in midcentral (30%-50% centrality class) Pb-Pb collisions at a center-of-mass energy per nucleon pair sqrt[s_{NN}]=5.02  TeV, with the ALICE detector at the LHC. The D mesons were reconstructed via their hadronic decays at midrapidity, |y|<0.

Production of and in p-Pb collisions at TeV.

The transverse momentum distributions of the strange and double-strange hyperon resonances (, ) produced in p-Pb collisions at TeV were measured in the rapidity range for event classes corresponding to different charged-particle multiplicity densities, d/d. The mean transverse momentum values are presented as a function of d/d, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of d/d.

J/ψ Elliptic Flow in Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV.

We report a precise measurement of the J/ψ elliptic flow in Pb-Pb collisions at sqrt[s_{NN}]=5.02  TeV with the ALICE detector at the LHC. The J/ψ mesons are reconstructed at midrapidity (|y|<0.

Anomalous Evolution of the Near-Side Jet Peak Shape in Pb-Pb Collisions at sqrt[s_{NN}]=2.76 TeV.

The measurement of two-particle angular correlations is a powerful tool to study jet quenching in a p_{T} region inaccessible by direct jet identification. In these measurements pseudorapidity (Δη) and azimuthal (Δφ) differences are used to extract the shape of the near-side peak formed by particles associated with a higher p_{T} trigger particle (1 View Article and Find Full Text PDF

Production of [Formula: see text] and [Formula: see text] mesons up to high transverse momentum in pp collisions at 2.76 TeV.

The invariant differential cross sections for inclusive [Formula: see text] and [Formula: see text] mesons at midrapidity were measured in pp collisions at [Formula: see text] TeV for transverse momenta [Formula: see text] GeV/ and [Formula: see text] GeV/, respectively, using the ALICE detector. This large range in [Formula: see text] was achieved by combining various analysis techniques and different triggers involving the electromagnetic calorimeter (EMCal). In particular, a new single-cluster, shower-shape based method was developed for the identification of high-[Formula: see text] neutral pions, which exploits that the showers originating from their decay photons overlap in the EMCal.

Energy dependence of forward-rapidity [Formula: see text] and [Formula: see text] production in pp collisions at the LHC.

We present results on transverse momentum ([Formula: see text]) and rapidity ([Formula: see text]) differential production cross sections, mean transverse momentum and mean transverse momentum square of inclusive [Formula: see text] and [Formula: see text] at forward rapidity ([Formula: see text]) as well as [Formula: see text]-to-[Formula: see text] cross section ratios. These quantities are measured in pp collisions at center of mass energies [Formula: see text] and 13 TeV with the ALICE detector. Both charmonium states are reconstructed in the dimuon decay channel, using the muon spectrometer.

Azimuthally Differential Pion Femtoscopy in Pb-Pb Collisions at sqrt[s_{NN}]=2.76 TeV.

We present the first azimuthally differential measurements of the pion source size relative to the second harmonic event plane in Pb-Pb collisions at a center-of-mass energy per nucleon-nucleon pair of sqrt[s_{NN}]=2.76  TeV. The measurements have been performed in the centrality range 0%-50% and for pion pair transverse momenta 0.

Measurement of azimuthal correlations of D mesons with charged particles in pp collisions at [Formula: see text] TeV and p-Pb collisions at [Formula: see text] TeV.

The azimuthal correlations of D mesons with charged particles were measured with the ALICE apparatus in pp collisions at [Formula: see text] and p-Pb collisions at [Formula: see text] at the Large Hadron Collider. [Formula: see text], [Formula: see text], and [Formula: see text] mesons and their charge conjugates with transverse momentum [Formula: see text] and rapidity in the nucleon-nucleon centre-of-mass system [Formula: see text] (pp collisions) and [Formula: see text] (p-Pb collisions) were correlated to charged particles with [Formula: see text]. The yield of charged particles in the correlation peak induced by the jet containing the D meson and the peak width are compatible within uncertainties in the two collision systems.

Flow Dominance and Factorization of Transverse Momentum Correlations in Pb-Pb Collisions at the LHC.

We present the first measurement of the two-particle transverse momentum differential correlation function, P_{2}≡⟨Δp_{T}Δp_{T}⟩/⟨p_{T}⟩^{2}, in Pb-Pb collisions at sqrt[s_{NN}]=2.76  TeV. Results for P_{2} are reported as a function of the relative pseudorapidity (Δη) and azimuthal angle (Δφ) between two particles for different collision centralities.

Correlated Event-by-Event Fluctuations of Flow Harmonics in Pb-Pb Collisions at sqrt[s_{NN}]=2.76 TeV.

We report the measurements of correlations between event-by-event fluctuations of amplitudes of anisotropic flow harmonics in nucleus-nucleus collisions, obtained for the first time using a new analysis method based on multiparticle cumulants in mixed harmonics. This novel method is robust against systematic biases originating from nonflow effects and by construction any dependence on symmetry planes is eliminated. We demonstrate that correlations of flow harmonics exhibit a better sensitivity to medium properties than the individual flow harmonics.

Centrality Dependence of the Charged-Particle Multiplicity Density at Midrapidity in Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV.

The pseudorapidity density of charged particles, dN_{ch}/dη, at midrapidity in Pb-Pb collisions has been measured at a center-of-mass energy per nucleon pair of sqrt[s_{NN}]=5.02  TeV. For the 5% most central collisions, we measure a value of 1943±54.

Measurement of an Excess in the Yield of J/ψ at Very Low p_{T} in Pb-Pb Collisions at sqrt[s]_{NN}=2.76 TeV.

We report on the first measurement of an excess in the yield of J/ψ at very low transverse momentum (p_{T}<0.3  GeV/c) in peripheral hadronic Pb-Pb collisions at sqrt[s_{NN}]=2.76  TeV, performed by ALICE at the CERN LHC.

Anisotropic Flow of Charged Particles in Pb-Pb Collisions at √[s{NN}]=5.02 TeV.

We report the first results of elliptic (v_{2}), triangular (v_{3}), and quadrangular (v_{4}) flow of charged particles in Pb-Pb collisions at a center-of-mass energy per nucleon pair of sqrt[s_{NN}]=5.02  TeV with the ALICE detector at the CERN Large Hadron Collider. The measurements are performed in the central pseudorapidity region |η|<0.

Multiplicity and transverse momentum evolution of charge-dependent correlations in pp, p-Pb, and Pb-Pb collisions at the LHC.

We report on two-particle charge-dependent correlations in pp, p-Pb, and Pb-Pb collisions as a function of the pseudorapidity and azimuthal angle difference, [Formula: see text] and [Formula: see text] respectively. These correlations are studied using the balance function that probes the charge creation time and the development of collectivity in the produced system. The dependence of the balance function on the event multiplicity as well as on the trigger and associated particle transverse momentum ([Formula: see text]) in pp, p-Pb, and Pb-Pb collisions at [Formula: see text] 7, 5.