Controlled Growth of ZIF-8 Membranes on GO-Coated α-Alumina Supports via ZnO Atomic Layer Deposition for Improved Gas Separation.

This study presents a novel approach for fabricating ZIF-8 membranes supported on α-alumina hollow fibers through the introduction of a graphene oxide (GO) gutter layer and the application of zinc oxide (ZnO) Atomic Layer Deposition (ALD). The method successfully addressed key challenges, including excessive precursor penetration and membrane thickness. The introduction of the GO layer and subsequent ZnO ALD treatment significantly reduced membrane thickness to approximately 300 nm and eliminated delamination issues between the GO layer and the alumina support.

N-Carbon-Doped Binary Nanophase of Metal Oxide/Metal-Organic Framework for Extremely Sensitive and Selective Gas Response.

Metal-organic frameworks (MOFs), which are highly ordered structures exhibiting sub-nanometer porosity, possess significant potential for diverse gas applications. However, their inherent insulative properties limit their utility in electrochemical gas sensing. This investigation successfully modifies the electrical conductivity of zeolitic imidazolte framework-8 (ZIF-8) employing a straightforward surface oxidation methodology.

ZIF-L to ZIF-8 Transformation: Morphology and Structure Controls.

The control of the structure, shape, and components of metal-organic frameworks, in which metal ions and organic ligands coordinate to form crystalline nanopore structures, plays an important role in the use of many electrochemical applications, such as energy storage, high-performance photovoltaic devices, and supercapacitors. In this study, systematic controls of synthesis variables were performed to control the morphology of ZIF-8 during the ZIF-L-to-ZIF-8 transformation of ZIF-L, which has the same building block as ZIF-8 but forms a two-dimensional structure. Furthermore, additional precursors or surfactants (Zn, 2mIm, and CTAB) were introduced during the transition to determine whether the alteration could be regulated.

Facile Fabrication of α-Alumina Hollow Fiber-Supported ZIF-8 Membrane Module and Impurity Effects on Propylene Separation Performance.

The separation of C olefin and paraffin, which is essential for the production of propylene, can be facilitated by the ZIF-8 membrane. However, the commercial application of the membrane has not yet been achieved because the fabrication process does not meet industrial regulatory criteria. In this work, we provide a straightforward and cost-effective membrane fabrication technique that permits the rapid synthesis of ZIF-8 hollow fiber membranes.

Graphene Nanoribbon Hybridization of Zeolitic Imidazolate Framework Membranes for Intrinsic Molecular Separation.

Zeolitic imidazolate frameworks (ZIFs) are promising for gas separation membrane, but their molecular cut-off differs from that expected from its intrinsic aperture structure because of their flexibility. Herein, we introduced graphene nanoribbons (GNRs) to rigidify the ZIF framework. Because the sp edge of the GNRs induces strong anchoring effects, the modified layer can be rigidified.

All-Nanoporous Hybrid Membranes: Incorporating Zeolite Nanoparticles and Nanosheets with Zeolitic Imidazolate Framework Matrices.

Metal-organic framework (MOF) membranes have attractive molecular separation properties but require challenging thin-film deposition techniques on expensive/specialty supports to obtain high performance relative to conventional polymer membranes. We demonstrate and analyze in detail the new concept of all-nanoporous hybrid membranes (ANHMs), which combines two or more nanoporous materials of different morphologies into a single membrane without the use of any polymeric materials. This allows access to a previously inaccessible region of very high permeability and selectivity properties, a feature that enables ANHMs to show high performance even when fabricated with simple coating and solvent evaporation methods on low-cost supports.

ZIF-8 Membrane Separation Performance Tuning by Vapor Phase Ligand Treatment.

Vapor phase ligand treatment (VPLT) of 2-aminobenzimidazole (2abIm) for 2-methylimidazole (2mIm) in ZIF-8 membranes prepared by two different methods (LIPS: ligand induced permselectivation and RTD: rapid thermal deposition) results in a notable shift of the molecular level cut-off to smaller molecules establishing selectivity improvements from ca. 1.8 to 5 for O /N ; 2.

ZIF-8 Membranes via Interfacial Microfluidic Processing in Polymeric Hollow Fibers: Efficient Propylene Separation at Elevated Pressures.

Propylene/propane (C3H6/C3H8) separations are performed on a large scale by energy-intensive distillation processes. Membranes based on metal-organic framework (MOF) molecular sieves, such as zeolitic imidazolate framework-8 (ZIF-8), offer the potential to perform these separations at considerably lower cost. However, the fabrication of scalable ZIF-8 membranes with high performance at elevated pressures and temperatures is challenging.

Highly tunable molecular sieving and adsorption properties of mixed-linker zeolitic imidazolate frameworks.

Nanoporous zeolitic imidazolate frameworks (ZIFs) form structural topologies equivalent to zeolites. ZIFs containing only one type of imidazole linker show separation capability for limited molecular pairs. We show that the effective pore size, hydrophilicity, and organophilicity of ZIFs can be continuously and drastically tuned using mixed-linker ZIFs containing two types of linkers, allowing their use as a more general molecular separation platform.

Separation membranes. Interfacial microfluidic processing of metal-organic framework hollow fiber membranes.

Molecular sieving metal-organic framework (MOF) membranes have great potential for energy-efficient chemical separations, but a major hurdle is the lack of a scalable and inexpensive membrane fabrication mechanism. We describe a route for processing MOF membranes in polymeric hollow fibers, combining a two-solvent interfacial approach for positional control over membrane formation (at inner and outer surfaces, or in the bulk, of the fibers), a microfluidic approach to replenishment or recycling of reactants, and an in situ module for membrane fabrication and permeation. We fabricated continuous molecular sieving ZIF-8 membranes in single and multiple poly(amide-imide) hollow fibers, with H2/C3H8 and C3H6/C3H8 separation factors as high as 370 and 12, respectively.