Cytotoxicity assessment of eluates from vacuum-forming thermoplastics.

Objectives: This study aimed to evaluate possible cytotoxic effects of thermoplastic materials commonly used for occlusal splints and orthodontic appliances.

Methods: Seven thermoplastics were included: three variants of the Essix sheets (C+, Plus, and Tray Rite; Dentsply Sirona), three thermoplastics (Bleach Heavy, Splint, and X-Heavy; Cavex Holland) and Invisalign (Align Technology). Cylindrical specimens (n = 24; 10 mm diameter) were incubated in cell culture medium for 24 h and 14 days.

Level of BPA contamination in resin composites determines BPA release.

Objectives: Resin composites may release bisphenol A (BPA) due to impurities present in the monomers. However, there is a lack of knowledge regarding the leaching characteristics of BPA from resin composites. Therefore, experimental resin composites were prepared with known amounts of BPA.

Elution from direct composites for provisional restorations.

Purpose To assess elution from direct composite materials for provisional restorations and compare them with elution from direct restorative composites for permanent restorations.Methods Two dual-cure (Integrity Multi-Cure and Tempsmart DC) and two self-curing composites (Protemp 4 and Structur 3) were used, with Essentia serving as a reference. Cylindrical specimens (n=20) were cured according to the manufacturer's instructions; the dual-cure materials were prepared in both self- and dual-curing modes.

Degradation products of resin-based materials detected in saliva in vivo.

Objectives: Dental composites remain under scrutiny regarding their (long-term) safety. In spite of numerous studies on the release of monomers both in vitro and in vivo, only limited quantitative data exist on the in vivo leaching of degradation products from monomers and additives. The aim of this observational study was for the first time to quantitatively and qualitatively monitor the release of parent compounds and their degradation products in saliva from patients undergoing multiple restorations.

Bisphenol A release from short-term degraded resin-based dental materials.

Objectives: There is still much debate about the release of bisphenol A (BPA) from resin-based dental materials. Therefore, this study aimed to quantify BPA present as an impurity and to evaluate whether their degradation by salivary, bacterial, and chemical challenges could increase its release.

Methods: BPA was determined in three different amounts (300, 400, and 500 µg) of eight unpolymerized resin-based materials (four composites, one fissure sealant, two adhesives and one root canal sealer).

Identification of chemicals leaching from dental resin-based materials after in vitro chemical and salivary degradation.

Objectives: Only little is known about degradation of methacrylate monomers. Therefore, using in vitro chemical and saliva degradation this study aimed to identify the degradation products of organic compounds present in resin-based dental materials.

Methods: Ten dental monomers and nine polymerized dental resin-based materials were immersed for 24 h in chemical media (0.

Assessing the estrogenic activity of chemicals present in resin based dental composites and in leachates of commercially available composites using the ERα-CALUX bioassay.

Objective: The biocompatibility of resin based dental composites has not yet been fully characterized even though certain monomers used in these composites are synthesized from Bisphenol A (BPA), a well-known estrogenic endocrine disruptor. As a result, they show structural relationship to BPA and can contain it as an impurity. Therefore, the estrogenic activity of 9 monomers, 2 photoinitiators, one photostabilizer and leachates of 4 commercially available composites was determined.

Long-term elution of bisphenol A from dental composites.

Objectives: BPA release from composites on the short term has been reported in several in-vitro and in-vivo studies. However, it remains unclear whether these materials also leach BPA on the long term. Even though composites may release various (BPA-based) methacrylate monomers up to one year, quantitative data about BPA have not been reported due to the lack of a sensitive method to accurately quantify low levels of BPA.

Bisphenol A as degradation product of monomers used in resin-based dental materials.

Objective: There is still much debate about the release of bisphenol-A (BPA) from dental materials. Therefore, this study aimed to quantify BPA present as an impurity in both BPA-based and non-BPA-based monomers and to evaluate whether these monomers may degrade to BPA upon salivary, bacterial, and chemical challenges.

Methods: BPA was determined in three different amounts (1, 2, and 3 μmol) of each monomer (TEGDMA, UDMA, mUDMA, BisGMA, BisEMA-3, -6, -10, -30, BisPMA, EBPADMA urethane, BADGE, and BisDMA).

Optimizing glass-ceramic bonding incorporating new silane technology in an experimental universal adhesive formulation.

Objective: Incorporating silane-coupling agent into universal adhesives (UAs) to simplify adhesive luting of glass-ceramic restorations appeared ineffective due to silane's instability in an acidic aqueous solution. This study aimed to evaluate new silane technology added to an experimental UA to be bonded to glass ceramics without separate prior silanization.

Methods: Combined silane technology, consisting of 3-(aminopropyl)triethoxysilane (APTES) and γ-methacryloxypropyltriethoxysilane (γMPTES), was incorporated into an experimental UA formulation, being referred to as ADH-XTE (3M Oral Care).

Monomer release from direct and indirect adhesive restorations: A comparative in vitro study.

Objectives: Indirect dental restorations produced by computer-aided design and computer-aided manufacturing (CAD/CAM) are relatively new in daily dental practice. The aim of the present study was to compare the monomer release between direct composite restorations and indirect CAD/CAM produced restorations (composite, ceramic and hybrid).

Methods: Identical crown restorations were prepared from three indirect materials (Cerasmart, Vitablocs Mark II and Vita Enamic) and one composite material (Clearfil AP-X).

Human phase I in vitro liver metabolism of two bisphenolic diglycidyl ethers BADGE and BFDGE.

Root canal sealers are commonly used to endodontically treat teeth with periapical infections. Some root canal sealers based on epoxy resin contain bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE). The presence of these chemicals is of concern due to the close contact to the blood stream at the apex and the long setting times of up to 24 h.

Zinc-Calcium-Fluoride Bioglass-Based Innovative Multifunctional Dental Adhesive with Thick Adhesive Resin Film Thickness.

Apart from producing high bond strength to tooth enamel and dentin, a dental adhesive with biotherapeutic potential is clinically desirable, aiming to further improve tooth restoration longevity. In this laboratory study, an experimental two-step universal adhesive, referred to as Exp_2UA, applicable in both the etch-and-rinse (E&R) and self-etch (SE) modes and combining a primer, containing 10-methacryloyloxydecyldihydrogen phosphate as a functional monomer with chemical binding potential to hydroxyapatite, with a bioglass-containing hydrophobic adhesive resin, was multifactorially investigated. In addition to primary property assessment, including measurement of bond strength, water sorption, solubility, and polymerization efficiency, the resultant adhesive-dentin interface was characterized by transmission electron microscopy (TEM), the filler composition was analyzed by energy-dispersive X-ray spectroscopy, and the bioactive potential of the adhesive was estimated by measuring the long-term ion release and assessing its antienzymatic and antibacterial potential.

Filtration efficiency of surgical and FFP3 masks against composite dust.

The aim of this study was to investigate the protection efficiency of two types of face masks against composite dust and to characterize the particles that penetrated through the masks. Composite dust was created by grinding a commercial nano-filled composite in a plexiglass box without using water cooling or high vacuum evacuation, in order to obtain a worst-case exposure. Dust particles were collected using a personal inhalable aerosol sampler (IOM) fixed inside a custom-made phantom head.

Agglomeration of titanium dioxide nanoparticles increases toxicological responses in vitro and in vivo.

Background: The terms agglomerates and aggregates are frequently used in the regulatory definition(s) of nanomaterials (NMs) and hence attract attention in view of their potential influence on health effects. However, the influence of nanoparticle (NP) agglomeration and aggregation on toxicity is poorly understood although it is strongly believed that smaller the size of the NPs greater the toxicity. A toxicologically relevant definition of NMs is therefore not yet available, which affects not only the risk assessment process but also hinders the regulation of nano-products.

Structural/Chemical Characterization and Bond Strength of a New Self-Adhesive Bulk-fill Restorative.

Purpose: The material structure and chemical elemental composition of a new self-adhesive composite hybrid were investigated. The bonding performance when applied on flat (FLAT) vs high C-factor class-I cavity-bottom (CAVITY) dentin and in light-cure (LC) vs self-cure (SC) mode was determined.

Materials And Methods: The self-adhesive bulk-fill composite Surefil One (Su-O; Dentsply Sirona) was compared with the resin-modified glass-ionomer Fuji II LC Improved (Fuji2LC; GC) and the ion-releasing alkasite material Cention N (CentionN; Ivoclar Vivadent).

Bonding Efficacy of a New Self-Adhesive Restorative onto Flat Dentin vs Class-I Cavity-bottom Dentin.

Purpose: This study investigated the bonding efficacy of a new so-called self-adhesive composite hybrid onto flat (FLAT) and high C-factor class-I cavity-bottom (CAVITY) dentin.

Materials And Methods: The immediate and aged (50,000 thermocycles) microtensile bond strength (μTBS) to FLAT and CAVITY dentin of the experimental self-adhesive bulk-fill restorative (K-0180 ASAR pilot [ASAR-pilot], Dentsply Sirona) was compared to that of two universal adhesives applied in self-etch mode and combined with a bulk-fill composite (Prime&Bond Elect/QuiXfil [P&Be/QuiXF], Prime&Bond Active/QuiXfil [P&Ba/QuiXF], both Dentsply Sirona), two pre-conditioned materials (Activa Bioactive-Restorative [Activa], Pulpdent; Fuji II LC Improved [Fuji2LC], GC); and one bulk-fill glass-hybrid restorative (Equia Forte Fil [EquiaF], GC). Statistically significant differences were recorded using Welch's ANOVA with Games-Howell contrast (p < 0.

Cytotoxic and genotoxic potential of respirable fraction of composite dust on human bronchial cells.

Objective: To determine the cytotoxic and genotoxic potential of the respirable fraction of composite dust (<4 μm) on human bronchial epithelial cells.

Methods: Composite sticks of three commercial dental composites (Filtek Supreme XTE, Grandio, Transbond XT) were ground in an enclosed plexiglass chamber with a rough dental bur (grain-size 100 μm) and the generated airborne respirable dust was collected in a personal cyclone on a teflon filter (pore size 5 μm). Immediately after particle collection, the dust was quantified gravimetrically and the particles were suspended in cell culturing medium.

The effect of water spray on the release of composite nano-dust.

Objective: To evaluate the collection efficiency of water spray on the release of airborne composite particles during grinding of composite materials.

Materials And Methods: Composite sticks (L:35 mm × W:5.4 mm × H:1.

Bonding to enamel using alternative Enamel Conditioner/etchants.

Objective: Enamel bond durability of three new alternative etchants combined with three representative adhesives was determined.

Methods: The 'immediate' and 'aged' micro-tensile bond strength (μTBS) of the 3-step etch&rinse adhesive OptiBond FL ('O-FL', Kerr), 2-step self-etch (SE) adhesive Clearfil SE Bond 2 ('C-SE2', Kuraray Noritake) and universal adhesive Adhese Universal ('ADU', Ivoclar Vivadent) were measured when bonded to enamel following either a proprietary organic acid-containing Enamel Conditioner ('EC', Shofu), a phosphoric-acid monomer-containing Multi Etchant ('ME', Yamakin: 10-methacryloyloxy tetraethylene glycol dihydrogenphosphate or MTEGP), or a metal salt-based ZON etchant ('ZON', Ivoclar Vivadent: ZrO(NO)). All alternative etchants were used in replacement of phosphoric acid, the latter (K-Etchant, Kuraray Noritake) also used with O-FL and ADU, in addition to C-SE2 that was solely used in SE mode (controls).

Secondary caries: prevalence, characteristics, and approach.

Objectives: The objectives of this cross-sectional survey were to determine the prevalence of secondary caries (SC) in general population, to identify patient- and material-related factors which may affect the prevalence, and to describe some clinical characteristics of SC lesions.

Materials And Methods: A total of 4036 restorations in 450 patients, who visited the university dental clinic for a regular (half) yearly checkup, were examined clinically (and radiographically) for the presence of SC. Clinical characteristics of the detected SC lesions (size, activity, and location) and the planned treatment were recorded.

Investigating the in vitro metabolism of the dental resin monomers BisGMA, BisPMA, TCD-DI-HEA and UDMA using human liver microsomes and quadrupole time of flight mass spectrometry.

Dental resin systems have been in use for several decades. (Meth)acrylic monomers are an important part of the matrix system and are either based on BPA while others lack the BPA core. The degree of conversion during restoration is in general between 50-70 % allowing leaching from unreacted monomers to the oral cavity where they can be taken up through the pulp or gastrointestinal tract after ingestion with subsequent hepatic metabolism.

Long-term elution of monomers from resin-based dental composites.

Objective: To bridge the gap between the current alarming literature on resin-based dental materials and the limited clinical observations, more precise knowledge on the actual quantity of released compounds should be acquired. The objective of this study was to quantify the long-term elution of various compounds from resin-based dental composites during one year.

Methods: Eight materials were investigated: G-aenial Anterior, G-aenial Posterior, Venus, Venus Pearl, Venus Diamond, Ceram X mono, Dyract and Filtek Supreme XTE.

Qualitative analysis of dental material ingredients, composite resins and sealants using liquid chromatography coupled to quadrupole time of flight mass spectrometry.

Since 2011, the World Health Organization has encouraged a global phase-down of the use of dental amalgam and actively supported the use of alternative, resin-based dental materials. The resins consist of (meth)acrylate monomers derived from Bisphenol A (BPA), such as Bisphenol A glycidyl methacrylate (BisGMA) and Bisphenol A ethoxylate methacrylate (BisEMA) or triethylene glycol dimethacrylate (TEGDMA) and urethane dimethacrylate (UDMA) which lack the BPA backbone. Besides monomers, other compounds such as photoinitiators and stabilizing agents can be present in the dental resin matrices.

In-vitro transdentinal diffusion of monomers from adhesives.

Objectives: Biocompatibility of adhesives is important since adhesives may be applied on dentin near the pulp. Accurate knowledge of the quantity of monomers reaching the pulp is important to determine potential side effects. The aim of this study was to assess the transdentinal diffusion of residual monomers from dental adhesive systems using an in-vitro pulp chamber model.