Computational and infrared spectroscopic investigations of N-substituted carbazoles.

The carbazole moiety is a commonly identified structural motif in the high-molecular-weight components of petroleum, known as asphaltenes. Detailed characterization of carbazoles is important for understanding the structure of asphaltenes and addressing challenges in the areas of heavy oil recovery, transportation, upgrading, and oil spills, arising from asphaltene properties and composition. In this work we study carbazole and the four N-substituted carbazoles 9-methylcarbazole, 9-ethylcarbazole, 9-vinylcarbazole and 9-phenylcarbazole.

Photoacoustic Detection of Weak Absorption Bands in Infrared Spectra of Calcite.

Photoacoustic spectroscopic detection of infrared absorption often produces spectra with enhanced intensities for weaker peaks, enabling the detection of features due to overtones and combinations, as well as less-abundant isotopic species. To illustrate this phenomenon, we present and discuss photoacoustic infrared spectra of calcite. We use linearization of rapid-scan spectra, as well as comparing step-scan and rapid-scan spectra, to demonstrate that saturation is not the driving force behind these enhanced intensities.

Infrared spectra of micro-structured samples with microPhotoacoustic spectroscopy and synchrotron radiation.

Photoacoustic spectroscopy (PAS) measures the photon absorption spectrum of a sample through detection of the acoustic wave generated by the photothermal effect as one modulates the intensity of the incident radiation at each wavelength. We have recently demonstrated the implementation of PAS in a microscopy configuration with mid-infrared radiation (microPAS). In the present work, we describe the performance of microPAS using synchrotron radiation (SR) in diffraction-limited spectromicroscopy and imaging experiments.

Thermal-wave resonant cavity signal processing.

The thermal-wave resonant cavity (TWRC) technique has been used for thermal diffusivity measurements by many researchers. This study aims to reduce the uncertainty associated with TWRC signal processing (curve fitting) by means of numerical simulation and experimental verification. Simulations show that the plot of signal amplitude versus cavity length can be fitted to a simplified model reported previously when the initial fitting position is at least twice the thermal-wave diffusion length (2 μ), and that the uncertainty caused by different end positions is negligible in the range of 6-10 μ.

Step-scan differential Fourier transform infrared photoacoustic spectroscopy (DFTIR-PAS): a spectral deconvolution method for weak absorber detection in the presence of strongly overlapping background absorptions.

The determination of small absorption coefficients of trace gases in the atmosphere constitutes a challenge for analytical air contaminant measurements, especially in the presence of strongly absorbing backgrounds. A step-scan differential Fourier transform infrared photoacoustic spectroscopy (DFTIR-PAS) method was developed to suppress the coherent external noise and spurious photoacoustic (PA) signals caused by strongly absorbing backgrounds. The infrared absorption spectra of acetylene (CH) and local air were used to verify the performance of the step-scan DFTIR-PAS method.

A simplified model for thermal-wave cavity self-consistent measurement of thermal diffusivity.

A simplified theoretical model was developed for the thermal-wave cavity (TWC) technique in this study. This model takes thermal radiation into account and can be employed for absolute measurements of the thermal diffusivity of gas and liquid samples without any knowledge of geometrical and thermal parameters of the components of the TWC. Using this model and cavity-length scans, thermal diffusivities of air and distilled water were accurately and precisely measured as (2.

On the sensitivity of thermophotonic lock-in imaging and polarized Raman spectroscopy to early dental caries diagnosis.

Dental caries is the leading cause of tooth loss, which can promptly be prevented if detected in early stages of progression. Unfortunately, conventional diagnostic modalities currently used in dentistry lack the sensitivity to detect early caries. The authors' intention is to compare the ability of polarized Raman spectroscopy and thermophotonic imaging to make early caries diagnosis.

Photoacoustic spectroscopy using coherent synchrotron radiation: application to α-lactose monohydrate.

We produced coherent synchrotron radiation at the Canadian Light Source between about 5 and 30 cm(-1) in bursting and continuous emission modes and used it to acquire photoacoustic spectra of solids. A band was observed in the spectrum of α-lactose monohydrate at 18 cm(-1) and attributed to a rotational mode, in agreement with published data obtained using other numerical and experimental techniques.

Thermal-lens study of photochemical reaction kinetics.

We consider the time dependence of the absorption coefficient due to the photoinduced chemical reaction (PCR) and species diffusion to calculate the temperature rise in the thermal-lens (TL) effect. The TL signal at the detector plane is also calculated. This theoretical approach removes the restriction that the PCR time constant is much greater than the characteristic TL time constant, which was assumed in a previously published model.

Photoacoustic infrared spectroscopy of polymer beads.

Photoacoustic (PA) spectra of four types of polymer resin beads, ranging in size from 35 to 150 microm, were acquired using a Fourier transform infrared spectrometer capable of both rapid- and step-scan mirror movement. Thermal diffusion lengths were on the order of the particle sizes of the beads. The PA magnitude spectra were similar to absorption spectra; both positive- and negative-going features occurred in the phase spectra.

Mid-infrared photoacoustic spectroscopy of solids using an external-cavity quantum-cascade laser.

We describe the use of a pulsed external-cavity quantum-cascade laser (EC-QCL) for the acquisition of mid-IR photoacoustic (PA) spectra of solids. The EC-QCL employed in this work operates from 990 to 1075 cm(-1) (9.30-10.

Photoacoustic infrared spectroscopy of Syncrude post-extraction oil sand.

Rapid- and step-scan photoacoustic (PA) infrared spectra of three fractions of a Syncrude post-extraction oil sand were analyzed in detail in this work. The rapid-scan spectra showed that the samples were comprised primarily of kaolinite, quartz, silica, siderite, and residual hydrocarbons, and that the proportions of these constituents were different for each fraction. Depth profiling of the three post-extraction oil sands was accomplished using both rapid- and step-scan PA infrared spectroscopy.

Fluorescence rejection in Raman spectra of Syncrude Sweet Blend distillation fractions.

Four techniques for the reduction or elimination of fluorescence from Raman spectra of Syncrude process samples were examined in this study. These methods are based on the retrieval of Raman bands from differential, or derivative spectra. Differential data were generated by subtracting similar spectra of a given sample obtained in three ways: (a) shifted detection utilizing an array detector and two successive spectrometer settings; (b) shifted excitation (dispersive Raman) where the two spectra are recorded using neighbouring laser lines and ordinary photon counting; (c) shifted excitation (FT-Raman) in which the laser frequency is changed in software before acquisition of the second spectrum.

FT-Raman and photoacoustic infrared spectroscopy of syncrude light gas oil distillation fractions.

FT-Raman and photoacoustic (PA) infrared spectra of 12 distillation fractions derived from Syncrude light gas oil (LGO), which has a boiling range from 195 to 343 degrees C, were analyzed in detail in this study. In the fingerprint region (200-1800 cm(-1)) most of the information is obtained from the FT-Raman spectra, which display 36 bands that are assignable to various alkyl or aryl functional groups. Monocyclic, bicyclic and tricyclic aromatics in the 12 fractions were also characterized using Raman bands in this region.

FT-Raman and photoacoustic infrared spectroscopy of Syncrude heavy gas oil distillation fractions.

FT-Raman and photoacoustic (PA) infrared spectra of six distillation fractions derived from Syncrude heavy gas oil (HGO), which has a boiling range from 343 to 524 degrees C, were analyzed in detail in this study. Most of the information on the fingerprint region (200-1,800 cm(-1)) is provided by the FT-Raman spectra, which display approximately 30 bands that are assignable to functional groups in alkanes or aromatics. Monocyclic, bicyclic and tricyclic aromatics in the six fractions were also monitored using bands in this region.