Controlled electrodeposition of cobalt nanowires usingcompensation and their electron transport properties.

Superconducting hybrid structures based on single nanowires are a new type of nanoscale devices with peculiar transport characteristics. Control over the nanowire structure is essential for understanding hybrid electronic phenomena arising in such complex systems. In this work, we report a technique for the fabrication of cobalt nanowires by template-assisted electrodeposition usingcompensation, which allows revealing the fundamental dependence of the preferred direction of nanowire growth on the deposition potential.

Three-Dimensional Photonic Crystals Based on Porous Anodic Aluminum Oxide.

Photonic crystals (PCs) consisting of a periodic arrangement of holes in dielectric media have found success in light manipulation and sensing. Among them, three-dimensional (3D) PCs are in high demand due to their unique properties originating from multiple photonic band gaps (PBGs) and even full ones. Here, 3D PCs based on porous anodic aluminum oxide (AAO) were fabricated for the first time.

Stained Glass Effect in Anodic Aluminum Oxide Formed in Selenic Acid.

A combination of the unique porous structure and physical and chemical properties of anodic aluminum oxide (AAO) makes it widely used in cutting-edge areas of materials science and nanotechnology. Selenic acid electrolyte provides the ability to obtain AAO with low porosity and high optical transparency and thus is promising for the preparation of AAO photonic crystals (PhCs). Here, we show the influence of crystallographic orientation of Al on the electrochemical oxidation rate in 1 M HSeO as well as on the growth rate, porosity, and the effective refractive index of AAO.

Towards High-Temperature MEMS: Two-Step Annealing Suppressed Recrystallization in Thin Multilayer Pt-Rh/Zr Films.

Platinum-based thin films are widely used to create microelectronic devices operating at temperatures above 500 °C. One of the most effective ways to increase the high-temperature stability of platinum-based films involves incorporating refractory metal oxides (e.g.

Long-Term Operational Stability of Ta/Pt Thin-Film Microheaters: Impact of the Ta Adhesion Layer.

Microheaters with long-term stability are crucial for the development of a variety of microelectronic devices operated at high temperatures. Structured Ta/Pt bilayers, in which the Ta sublayer ensures high adhesion of the Pt resistive layer, are widely used to create microheaters. Herein, a comprehensive study of the microstructure of Ta/Pt films using high-resolution transmission electron microscopy with local elemental analysis reveals the twofold nature of Ta after annealing.

Mosaic of Anodic Alumina Inherited from Anodizing of Polycrystalline Substrate in Oxalic Acid.

The anodizing of aluminium under oscillating conditions is a versatile and reproducible method for the preparation of one-dimensional photonic crystals (PhCs). Many anodizing parameters have been optimised to improve the optical properties of anodic aluminium oxide (AAO) PhCs. However, the influence of the crystallographic orientation of an Al substrate on the characteristics of AAO PhCs has not been considered yet.

Size-Dependent Superconducting Properties of In Nanowire Arrays.

Arrays of superconducting nanowires may be useful as elements of novel nanoelectronic devices. The superconducting properties of nanowires differ significantly from the properties of bulk structures. For instance, different vortex configurations of the magnetic field have previously been predicted for nanowires with different diameters.

Superconducting Bio-Inspired Au-Nanowire-Based Neurons.

High-performance modeling of neurophysiological processes is an urgent task that requires new approaches to information processing. In this context, two- and three-junction superconducting quantum interferometers with Josephson weak links based on gold nanowires are fabricated and investigated experimentally. The studied cells are proposed for the implementation of bio-inspired neurons-high-performance, energy-efficient, and compact elements of neuromorphic processor.

One-Dimensional Photonic Crystals with Nonbranched Pores Prepared via Phosphorous Acid Anodizing of Aluminium.

One-dimensional photonic crystals (1D PhCs) obtained by aluminium anodizing under oscillating conditions are promising materials with structure-dependent optical properties. Electrolytes based on sulphuric, oxalic, and selenic acids have been utilized for the preparation of anodic aluminium oxide (AAO) 1D PhCs with sub-100-nm pore diameter. AAO films with larger pores can be obtained by anodizing in phosphorous acid at high voltages.

Pore Ordering in Anodic Aluminum Oxide: Interplay between the Pattern of Pore Nuclei and the Crystallographic Orientation of Aluminum.

Anodization of aluminum with a pre-patterned surface is a promising approach for preparing anodic aluminum oxide (AAO) films with defect-free pore arrangement. Although pronounced effects of crystallographic orientation of Al on the AAO structure have been demonstrated, all current studies on the anodization of pre-patterned aluminum consider the substrate as an isotropic medium and, thus, do not consider the azimuthal orientation of the pattern relative to the basis vectors of the Al unit cell. Here, we investigate the interplay between the azimuthal alignment of the pore nuclei array and the crystallographic orientation of aluminum.

Polarization-enhanced cell walls etching of anodic titanium oxide.

Anodic titanium oxide (ATO) photonic crystals (PhCs) are promising for photonics, photocatalysis, and solar cells. A refractive index modulation in ATO PhCs is caused by the modulation of porosity and, thus, the pore diameter should be controlled precisely. The ATO cell walls etching in electrolyte solution during anodizing increases the porosity of the PhC structure and shifts the photonic band gap (PBG) position to shorter wavelengths.

Uniform arrays of gold nanoelectrodes with tuneable recess depth.

Nanoelectrode arrays are much in demand in electroanalytical chemistry, electrocatalysis, and bioelectrochemistry. One of the promising approaches for the preparation of such systems is templated electrodeposition. In the present study, porous anodic alumina templates are used to prepare Au nanoelectrode arrays.

Magneto-optical effects in hyperbolic metamaterials based on ordered arrays of bisegmented gold/nickel nanorods.

Hyperbolic metamaterials (HMM) based on multilayered metal/dielectric films or ordered arrays of metal nanorods in a dielectric matrix are extremely attractive optical materials for manipulating over the parameters of the light flow. One of the most promising tools for tuning the optical properties of metamaterialsis the application of an external magnetic field. However, for the case of HMM based on the ordered arrays of magneto-plasmonic nanostructures, this effect has not been clearly demonstrated until now.

Bismuth nanowires: electrochemical fabrication, structural features, and transport properties.

Electrochemical aspects of Bi electrocrystallization from a bath containing bismuth nitrate in a mixture of ethylene glycol and water are addressed. Bismuth nanowires with diameters of 50-120 nm and a length of up to a few dozen microns were prepared by electrodeposition into the pores of anodic aluminium oxide templates. Crystal structure and morphology of electrodeposited materials were characterized using electron microscopy, selected area electron diffraction, and X-ray diffraction analysis.

Tuning the Optical Properties of Hyperbolic Metamaterials by Controlling the Volume Fraction of Metallic Nanorods.

Porous films of anodic aluminum oxide are widely used as templates for the electrochemical preparation of functional nanocomposites containing ordered arrays of anisotropic nanostructures. In these structures, the volume fraction of the inclusion phase, which strongly determines the functional properties of the nanocomposite, is equal to the porosity of the initial template. For the range of systems, the most pronounced effects and the best functional properties are expected when the volume fraction of metal is less than 10%, whereas the porosity of anodic aluminum oxide typically exceeds this value.

Titania Photonic Crystals with Precise Photonic Band Gap Position via Anodizing with Voltage versus Optical Path Length Modulation.

Photonic crystals based on titanium oxide are promising for optoelectronic applications, for example as components of solar cells and photodetectors. These materials attract great research attention because of the high refractive index of TiO. One of the promising routes to prepare photonic crystals based on titanium oxide is titanium anodizing at periodically changing voltage or current.

Comparative study of structure and permeability of porous oxide films on aluminum obtained by single- and two-step anodization.

A comparative study of the structure and transport properties of porous aluminum oxide films obtained by single- and two-step anodization was carried out. It is shown that the oxidation regime significantly affect the number of dead-ended channels, which results in more than twice the variation in membrane permeability. The effect is explained by multiple branching of channels on the initial stages of organization of the porous structure.

Controlled way to prepare quasi-1D nanostructures with complex chemical composition in porous anodic alumina.

Herein we propose a novel approach to the preparation of quasi-1D nanostructures with various chemical compositions based on infiltration of colloidal solution into the asymmetric anodic alumina membrane. The proposed technique was successfully applied for the preparation of ordered arrays of the magnetically hard anisotropic hexaferrite nanostructures.

Controlled growth of metallic inverse opals by electrodeposition.

The kinetics of nickel electrodeposition through a template of ordered polystyrene spheres is addressed experimentally and applied to prepare a series of metallic inverse opals with a non-integer number of layers. The observed layer-by-layer growth is discussed in terms of subsequently increasing disorder of the growth front. Reflection and transmission spectra of the samples demonstrate that the key optical features of these photonic crystals are most pronounced when the thickness does not essentially exceed two layers.

Fabrication of artificial opals by electric-field-assisted vertical deposition.

We present a new technique for large-scale fabrication of colloidal crystals with controllable quality and thickness. The method is based on vertical deposition in the presence of a DC electric field normal to the conducting substrate. The crystal structure and quality are quantitatively characterized by microradian X-ray diffraction, scanning electron microscopy, and optical reflectometry.

Double stacking faults in convectively assembled crystals of colloidal spheres.

Using microradian X-ray diffraction, we investigated the crystal structure of convectively assembled colloidal photonic crystals over macroscopic (0.5 mm) distances. Through adaptation of Wilson's theory for X-ray diffraction, we show that certain types of line defects that are often observed in scanning electron microscopy images of the surface of these crystals are actually planar defects at 70.