Fermented seasonings have pleasant flavors that stimulate our appetite. Their flavoring properties change depending on factors such as their materials and fermented conditions. Therefore, a comparative analysis of their flavor is important when evaluating their quality.
View Article and Find Full Text PDFYamahai-brewed sake, a Japanese alcoholic beverage brewed from rice and produced via natural lactic acid fermentation, has a complex and rich flavor compared with Sokujo-brewed sake, brewed with a general method using pure lactic acid. This study aimed to characterize the aroma compounds in Yamahai-brewed sake using solvent-assisted stir bar sorptive extraction (SA-SBSE) with gas chromatography-olfactometry/mass spectrometry (GC-O/MS) and to confirm the enhanced sensitivity of GC-O/MS with SA-SBSE compared with SBSE alone. SA-SBSE with GC-O/MS increased the number of detected odor-active compounds and improved the FD factor sensitivity of Yamahai-brewed sake.
View Article and Find Full Text PDFFor successful profiling of aroma carriers in food samples, a highly efficient extraction method is mandatory. A two-step stir bar sorptive extraction (SBSE) approach, namely fractionated SBSE (Fr-SBSE), was developed to improve both the organoleptic and the chemical identification of aroma compounds in beverages. Fr-SBSE consists of two multi-SBSE procedures (SBSE) performed sequentially on the same sample.
View Article and Find Full Text PDFStir bar sorptive extraction (SBSE) is a miniaturized and solvent-less sample preparation method for extraction and concentration of organic compounds from aqueous samples. The method is based on sorptive extraction, whereby the solutes are extracted into a polymer, such as polydimethylsiloxane (PDMS), coated on a stir bar. Using an apolar PDMS coating, SBSE provides high recoveries for apolar solutes; however, SBSE recoveries for polar solutes are low.
View Article and Find Full Text PDFA target analysis method for the sensitive and discriminative determination of the nerve agent hydrolysis products alkyl methylphosphonic acids as their tert-butyldimethylsilyl (TBDMS) derivatives was developed using a combination of selectable one- and two-dimensional (D/D) GC-MS, and applied to the analysis of samples with significant interfering matrices. After sample drying, the alkylmethylphosphonic acids and methylphosphonic acid (MPA) were converted to TBDMS derivatives by addition of N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide with heating, and subjected to D/D GC-MS. The apparatus consisted of an initial low thermal mass DB-5 column and a second DB-17 column together with an electron ionization quadrupole mass spectrometer, offering simple and flexible switching between one- and two-dimensional GC-MS analysis in a single GC-MS system.
View Article and Find Full Text PDFA novel solvent-assisted stir bar sorptive extraction (SA-SBSE) technique was developed for enhanced recovery of polar solutes in aqueous samples. A conventional PDMS stir bar was swollen in several solvents with log Kow ranging from 1.0 to 3.
View Article and Find Full Text PDFAn extension of multi-volatile method (MVM) technology using the combination of a standard dynamic headspace (DHS) configuration, and a modified DHS configuration incorporating an additional vacuum module, was developed for milliliter injection volume of aqueous sample with full sample evaporation. A prior step involved investigation of water management by weighing of the water residue in the adsorbent trap. The extended MVM for 1 mL aqueous sample consists of five different DHS method parameter sets including choice of the replaceable adsorbent trap.
View Article and Find Full Text PDFA method for analysis of hop-derived polyfunctional thiols, such as 4-sulfanyl-4-methylpentan-2-one (4S4M2Pone), 3-sulfanylhexan-1-ol (3SHol), and 3-sulfanylhexyl acetate (3SHA), in beer, hop water extract, and wort at nanogram per liter levels was developed. The method employed stir bar sorptive extraction with in situ derivatization (der-SBSE) using ethyl propiolate (ETP), followed by thermal desorption and gas chromatography-tandem mass spectrometry (TD-GC-MS/MS) with selected reaction monitoring (SRM) mode. A prior step involved structural identification of the ETP derivatives of the thiols by TD-GC-quadrupole-time-of-flight mass spectrometry with parallel sulfur chemiluminescence detection (Q-TOF-MS/SCD) after similar der-SBSE.
View Article and Find Full Text PDFA novel multi-volatile method (MVM) using sequential dynamic headspace (DHS) sampling for analysis of aroma compounds in aqueous sample was developed. The MVM consists of three different DHS method parameters sets including choice of the replaceable adsorbent trap. The first DHS sampling at 25 °C using a carbon-based adsorbent trap targets very volatile solutes with high vapor pressure (>20 kPa).
View Article and Find Full Text PDFA method is developed for identification of sulfur compounds in tobacco smoke extract. The method is based on large volume injection (LVI) of 10μL of tobacco smoke extract followed by selectable one-dimensional ((1)D) or two-dimensional ((2)D) gas chromatography (GC) coupled to a hybrid quadrupole time-of-flight mass spectrometer (Q-TOF-MS) using electron ionization (EI) and positive chemical ionization (PCI), with parallel sulfur chemiluminescence detection (SCD). In order to identify each individual sulfur compound, sequential heart-cuts of 28 sulfur fractions from (1)D GC to (2)D GC were performed with the three MS detection modes (SCD/EI-TOF-MS, SCD/PCI-TOF-MS, and SCD/PCI-Q-TOF-MS).
View Article and Find Full Text PDFAs reproducible coating of stir bars with more polar phases was found to be very difficult, a supporting grid was used in the development of an ethyleneglycol-modified Silicone (EG Silicone) coated stir bar. This new polar coating showed good performance for the extraction of polar solutes, but long term use also showed degradation of the coating due to friction while stirring. In order to address the lower robustness of the EG Silicone stir bar which has a much softer coating compared to a conventional polydimethylsiloxane (PDMS) stir bar, a novel SBSE procedure termed multi-SBSE ((m)SBSE) was developed.
View Article and Find Full Text PDFA method is described for characterization of sulfur compounds in unaged and aged whisky. The method is based on full evaporation dynamic headspace (FEDHS) of 100 μL of whisky samples followed by selectable one-dimensional ((1)D) or two-dimensional ((2)D) retention-time-locked (RTL) gas chromatography (GC)-mass spectrometry (MS) with simultaneous element-specific detection using a sulfur chemiluminescence detector (SCD) and a nitrogen chemiluminescence detector (NCD). Sequential heart-cuts of the 16 sulfur fractions were used to identify each individual sulfur compound in the unaged whisky.
View Article and Find Full Text PDFA method for analysis of a wide range of odor compounds in aqueous samples at sub-ng mL⁻¹ to μg mL⁻¹ levels was developed by full evaporation dynamic headspace (FEDHS) and gas chromatography-mass spectrometry (GC-MS). Compared to conventional DHS and headspace solid phase microextraction (HS-SPME), FEDHS provides more uniform enrichment over the entire polarity range for odor compounds in aqueous samples. FEDHS at 80°C using 3 L of purge gas allows complete vaporization of 100 μL of an aqueous sample, and trapping and drying it in an adsorbent packed tube, while providing high recoveries (85-103%) of the 18 model odor compounds (water solubility at 25°C: log0.
View Article and Find Full Text PDFSuspected fragrance allergens were determined in cosmetic products using a combination of full evaporation-dynamic headspace (FEDHS) with selectable one-dimensional/two-dimensional GC-MS. The full evaporation dynamic headspace approach allows the non-discriminating extraction and injection of both apolar and polar fragrance compounds, without contamination of the analytical system by high molecular weight non-volatile matrix compounds. The method can be applied to all classes of cosmetic samples, including water containing matrices such as shower gels or body creams.
View Article and Find Full Text PDFA method for the determination of ultra-trace amounts of organochlorine pesticides (OCPs) in river water was developed by using stir bar sorptive extraction (SBSE) followed by thermal desorption and comprehensive two-dimensional gas chromatography coupled to high-resolution time-of-flight mass spectrometry (SBSE-TD-GC×GC-HRTOF-MS). SBSE conditions such as extraction time profiles, phase ratio (β: sample volume/polydimethylsiloxane (PDMS) volume), and modifier addition, were examined. Fifty milli-liter sample including 10% acetone was extracted for 3 h using stir bars with a length of 20 mm and coated with a 0.
View Article and Find Full Text PDFA novel selectable one-dimensional ((1)D) or two-dimensional ((2)D) gas chromatography-olfactometry/mass spectrometry with preparative fraction collection (selectable (1)D/(2)D GC-O/MS with PFC) system was developed. The main advantages of this system are the simple and fast selection of (1)D GC-O/MS or (2)D GC-O/MS or (1)D GC-PFC or (2)D GC-PFC operation with a mouse click (without any instrumental set-up change), and total transfer of enriched compounds with thermal desorption (TD) on the same system for identification with (2)D GC-O/MS analysis. Recovery of PFC enrichment with 20 injection cycles of 15 model compounds at 500pg each (e.
View Article and Find Full Text PDFA novel selectable one-dimensional (1D) or two-dimensional (2D) gas chromatography-mass spectrometry (selectable 1D/2D GC-MS) system with selective detection was developed by using capillary flow technology and low thermal mass GC (LTM-GC). The main advantages of this system are the simple and fast selection of 1D GC-MS or 2D GC-MS operation without any instrumental set-up change (e.g.
View Article and Find Full Text PDFA novel extraction procedure for stir bar sorptive extraction (SBSE) termed sequential SBSE was developed. Compared to conventional SBSE, sequential SBSE provides more uniform enrichment over the entire polarity/volatility range for organic pollutants at ultra-trace levels in water. Sequential SBSE consists of a SBSE performed sequentially on a 5-mL sample first without modifier using one stir bar, then on the same sample after addition of 30% NaCl using a second stir bar.
View Article and Find Full Text PDFA method is described for fast dual-column separation of pesticides by use of dual low thermal mass gas chromatography-mass spectrometry (dual LTM-GC-MS) with different temperature programming. The method can provide two total ion chromatograms with different separation on DB-5 and DB-17 in a single run, which allows improved identification capability, even with short analysis time (<17 min). Also simultaneous detection with MS and elemental selective detector, e.
View Article and Find Full Text PDFA method is described for characterization of size-resolved particles including the nanoparticles fraction with a diameter of 29-58 nm in roadside atmosphere. The method is based on thermal desorption (TD) of a sample followed by comprehensive two-dimensional gas chromatography (GC x GC) with novel detection capabilities, including high resolution time-of-flight mass spectrometry (HRTOF-MS) and simultaneous detection with a nitrogen phosphorous detector (NPD) and a quadrupole mass spectrometer (qMS). Increased selectivity with the GC x GC-HRTOF-MS allows a group type separation of a selected chemical class, e.
View Article and Find Full Text PDFA method for fast screening of pesticide multiresidues in aqueous samples using dual stir bar sorptive extraction-thermal desorption-low thermal mass gas chromatography-mass spectrometry (dual SBSE-TD-LTM-GC-MS) has been developed. Recovery of 82 pesticides - organochlorine, carbamate, organophosphorous, pyrethroid and others - for the SBSE was evaluated as a function of octanol-water distribution coefficients (log K(o/w): 1.7-8.
View Article and Find Full Text PDFA multi-residue method to determine 85 pesticides, including organochlorine pesticides, carbamates, organophosphorus pesticides, and pyrethroids, in vegetables, fruit, and green tea, has been developed. The method is based on stir bar sorptive extraction (SBSE) coupled to thermal desorption (TD) and retention time locked (RTL) GC-MS operating in the scan mode. Samples are extracted with methanol and diluted with water prior to SBSE.
View Article and Find Full Text PDFA method for the simultaneous determination of seven preservatives - sorbic acid, benzoic acid, and p-hydroxybenzoic acid ethyl, isopropyl, propyl, isobutyl, and butyl esters - in beverages, vinegar, aqueous sauces, and quasi-drug drinks has been developed using the stir-bar sorptive extraction technique then thermal desorption GC-MS analysis. The extraction conditions - pH, sample volume, extraction temperature, salt addition, and extraction time - were examined. d5-Benzoic acid and p-hydroxybenzoic acid sec-butyl ester were added as surrogate internal standards to compensate for the effect of sample matrix and coexisting analytes on the sorptive extraction.
View Article and Find Full Text PDF