Effect of petroleum wastewater treated with gravity separation and magnetite nanoparticles adsorption methods on the blood biochemical response of mrigal fish (Cirrhinus cirrhosus).

Drainage of treated wastewater to surface water is a severe threat to the health of aquatic organisms. This study aimed to evaluate the effects of 0.5 and 1% water-soluble fractions of crude oil (WSFO), WSFO treated with magnetic nanoparticles of FeO (TWSFO-FeO) and with the gravity separation method (TWSFO-GSM) on Cirrhinus cirrhosis for 21 days.

Preparation of magnetic molecularly imprinted polymer for dispersive solid-phase extraction of valsartan and its determination by high-performance liquid chromatography: Box-Behnken design.

In this work, core/shell magnetic molecularly imprinted polymer nanoparticles were synthesized for extraction and pre-concentration of valsartan from different samples and then it was measured with high-performance liquid chromatography. For preparation of molecularly imprinted polymer nanoparticles, Fe O nanoparticles were coated with tetraethyl orthosilicate and then functionalized with 3-(trimethoxysilyl) propyl methacrylate. In the next step, molecularly imprinted polymer nanoparticles were synthesized under reflux and distillation conditions via polymerization of methacrylic acid, valsartan (as a template), azobisisobutyronitrile and ethylene glycol dimethacrylate as cross linking.

Extraction of diclofenac by SiO -NH @Fe O and its determination: Central composite design.

In this work, magnetic nanoparticles (Fe O ) were prepared by simple co-precipitation method in aqueous medium and then subsequently modified with tetraethyl orthosilicate and 3-aminopropyl triethylenesilane. The properties of the particles were characterized by FTIR spectroscopy X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. The SiO -NH @Fe O particles were successfully applied to simultaneously enrich and separate diclofenac from water, urine, and plasma samples.

Synthesis of mesoporous silica for adsorption of chlordiazepoxide and its determination by HPLC: Experimental design.

In this work, mesoporous silica (SBA-15-NH ) was used as an efficient adsorbent for extraction of chlordiazepoxide from different samples based on dispersive nanomaterial-ultrasound assisted microextraction followed by high-performance liquid chromatography. The prepared sorbent was characterized by fourier transform infrared spectroscopy, scanning electron microscopy, low-angle X-ray diffraction, thermal analysis, and N adsorption-desorption surface area measurement. Several variables affecting the extraction efficiency of the chlordiazepoxide, including the amounts of adsorbent, time of adsorption, pH and volume of desorption solvent were optimized by central composite design combined with desirability function.

Modified dispersive liquid-phase microextraction based on sequential injection solidified floating organic drop combined with HPLC for the determination of phenobarbital and phenytoin.

A modified dispersive liquid phase microextraction based on sequential injection solidified floating organic drop was developed for simultaneous separation/preconcentration of trace amounts of phenobarbital and phenytoin. The important factors affecting on the extraction recovery including pH, the volume of extraction solvent, ionic strength, and the number of injections were investigated and optimized by Box-Behnken design and desirability function. Under the optimum experimental conditions, the calibration graph was linear in the concentration range of 1.

Melatonin exacerbates acute experimental autoimmune encephalomyelitis by enhancing the serum levels of lactate: A potential biomarker of multiple sclerosis progression.

Melatonin has a beneficial role in adult rat models of multiple sclerosis (MS). In this study, melatonin treatment (10 mg/kg/d) was investigated in young age (5-6 weeks old) Lewis rat model of acute experimental autoimmune encephalomyelitis (EAE) followed by assessing serum levels of lactate and melatonin. Results showed that clinical outcomes were exacerbated in melatonin- (neurological score = 6) vs PBS-treated EAE rats (score = 5).

Preconcentration of valsartan by dispersive liquid-liquid microextraction based on solidification of floating organic drop and its determination in urine sample: Central composite design.

In this work, a fast, easy, and efficient dispersive liquid-liquid microextraction method based on solidification of floating organic drop followed by high-performance liquid chromatography with UV detection was developed for the separation/preconcentration and determination of the drug valsartan. Experimental design was applied for the optimization of the effective variables (such as volume of extracting and dispersing solvents, ionic strength, and pH) on the extraction efficiency of valsartan from urine samples. The optimized values were 250.

Application of modified stir bar with nickel:zinc sulphide nanoparticles loaded on activated carbon as a sorbent for preconcentration of losartan and valsartan and their determination by high performance liquid chromatography.

In this study, the stir bar was coated for the first time with the ​nicel:zins sulphide nanoparticles (Ni:ZnS NPs) loaded on activated carbon (AC) (Ni:ZnS-AC) as well as 1-ethyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) using sol gel technique and was used for stir bar sorptive extraction (SBSE) of losartan (LOS) and valsartan (VAL) as the model compounds. The extracted analytes were then quantified by high performance liquid chromatography (HPLC) equipped with an ultra violet detector. The best extraction performance for LOS and VAL was obtained through the optimization of the parameters affecting SBSE including pH of sample solution, ionic strength, extraction time, volume of desorption solvent, desorption time, and stirring speed.

Preconcentration and determination of chlordiazepoxide and diazepam drugs using dispersive nanomaterial-ultrasound assisted microextraction method followed by high performance liquid chromatography.

Benzodiazepines (BDs) are used widely in clinical practice, due to their multiple pharmacological functions. In this study a dispersive nanomaterial-ultrasound assisted- microextraction (DNUM) method followed by high performance liquid chromatography (HPLC) was used for the preconcentration and determination of chlordiazepoxide and diazepam drugs from urine and plasma samples. Various parameters such as amount of adsorbent (mg: ZnS-AC), pH and ionic strength of sample solution, vortex and ultrasonic time (min), and desorption volume (mL) were investigated by fractional factorial design (FFD) and central composite design (CCD).

Design of an optically stable pH sensor based on immobilization of Giemsa on triacetylcellulose membrane.

In this work a simple, inexpensive, and sensitive optical sensor based on triacetylcellulose membrane as solid support was developed by using immobilization of Giemsa indicator for pH measurement. In this method, the influence variables on the membrane performance including pH concentration of indicator, response time, ionic strength, and reversibility were investigated. At optimum values of all variables the response of optical pH sensor is linear in the pH range of 3.

Solid-phase extraction coupled with HPLC-DAD for determination of B vitamin concentrations in halophytes.

In our study, a simple and sensitive method was proposed for determination of vitamins B group in leaves of Suaeda aegyptiaca and Suaeda Vera (Halophytes) by HPLC-DAD with solid-phase extraction (SPE) as the preconcentration step. The variables affecting the extraction and determination conditions were investigated and optimized. A preconcentration step based on SPE is necessary to remove interfering components.

Solid phase microextraction of diclofenac using molecularly imprinted polymer sorbent in hollow fiber combined with fiber optic-linear array spectrophotometry.

A simple solid phase microextraction method based on molecularly imprinted polymer sorbent in the hollow fiber (MIP-HF-SPME) combined with fiber optic-linear array spectrophotometer has been applied for the extraction and determination of diclofenac in environmental and biological samples. The effects of different parameters such as pH, times of extraction, type and volume of the organic solvent, stirring rate and donor phase volume on the extraction efficiency of the diclofenac were investigated and optimized. Under the optimal conditions, the calibration graph was linear (r(2)=0.

Application of Optimized Vortex-Assisted Surfactant-Enhanced DLLME for Preconcentration of Thymol and Carvacrol, and Their Determination by HPLC-UV: Response Surface Methodology.

A novel vortex-assisted surfactant-enhanced dispersive liquid-liquid microextraction combined with high-performance liquid chromatography (VASEDLLME-HPLC) was developed for the determination of thymol and carvacrol (phenolic compound). In this method, the extraction solvent (CHCl3) was dispersed into the aqueous samples via a vortex agitator and addition of the surfactant (Triton X-100). The preliminary experiments were undertaken to select the best extraction solvent and surfactant.

Application of ultrasonic radiation for simultaneous removal of auramine O and safranine O by copper sulfide nanoparticles: experimental design.

In this study, copper sulfide nanoparticles loaded on activated carbon (CuS-NP-AC) were synthesized by novel, low cost and green approach and characterized using SEM and XRD. The application of this material for the simulations removal of auramine O (AO) and safranine O (SO) from aqueous solutions was investigated. The dependency of removal percentages to variables such as pH, initial dyes concentration, adsorbent dosage, sonication time and sonication temperature were studied with response surface methodology (RSM) by considering the desirability function (DF).

Application of an optimized dispersive nanomaterial ultrasound-assisted microextraction method for preconcentration of carbofuran and propoxur and their determination by high-performance liquid chromatography with UV detection.

An extraction method based on dispersive nanomaterial ultrasound-assisted microextraction was used for the preconcentration of carbofuran and propoxur insecticides in water samples prior to high-performance liquid chromatography with UV detection. ZnS:Ni nanoparticles were synthesized based on the reaction of the mixture of zinc acetate and nickel acetate with thioacetamide in aqueous media and then loaded on activated carbon (ZnS:Ni-AC). Different methods were used for recognizing the properties of ZnS:Ni-AC and then this nanomaterial was used for extraction of carbamate insecticide as new adsorbent.

Application of central composite design for simultaneous removal of methylene blue and Pb(2+) ions by walnut wood activated carbon.

Activated carbon was prepared from walnut wood which was locally available, non-toxic, abundant and cheap. This new adsorbent was characterized using BET, FTIR and SEM. Point of zero charge (pHpzc) and oxygen containing functional groups were also determined.

Application of response surface methodology for determination of methyl red in water samples by spectrophotometry method.

In this study a rapid and effective method (dispersive liquid-liquid microextraction (DLLME)) was developed for extraction of methyl red (MR) prior to its determination by UV-Vis spectrophotometry. Influence variables on DLLME such as volume of chloroform (as extractant solvent) and methanol (as dispersive solvent), pH and ionic strength and extraction time were investigated. Then significant variables were optimized by using a Box-Behnken design (BBD) and desirability function (DF).

Application of optimized dispersive liquid-liquid microextraction for determination of melatonin by HPLC-UV in plasma samples.

Melatonin (N-acetyl-3-(2-aminoethyl)-5-methoxyindole) is biologically active as a neurohormone and antioxidant agent. The optimized dispersive liquid-liquid microextraction (DLLME) followed by high-performance liquid chromatography-ultra violet detection (HPLC-UV) was used for the analysis of melatonin in human plasma. Influence variables such as volume of extracting (carbon tetrachloride: CCl4) and dispersing solvents (acetonitrile: ACN), pH and ionic strength, extraction time and centrifugation time were screened in a 2(6-2) fractional factorial design (FFD) and then the significant variables were optimized by using a central composite design (CCD).

Removal of Direct Red 12B by garlic peel as a cheap adsorbent: kinetics, thermodynamic and equilibrium isotherms study of removal.

The removal of dyes from industrial waste is very important from health and hygiene point of view and for environmental protection. In this work, efficiency and performance of garlic peel (GP) adsorbent for the removal of Direct Red 12B (DR12B) from wastewater was investigated. The influence of variables including pH, concentration of the dye and amount of adsorbent, particle size, contact time and temperature on the dye removal has been investigated.

Identification and determination of the fatty acid composition of Quercus brantii growing in southwestern Iran by GC-MS.

This article reports the fatty acid composition of the oil extracts from Quercus brantii fruits growing in Kohgiloye va Boyer Ahmad province in southwestern Iran. The oil from Q. brantii fruits was extracted with hexane in Soxhlet apparatus and subsequently identified and determined by using gas chromatography-mass spectroscopy.

Dispersive nano solid material-ultrasound assisted microextraction as a novel method for extraction and determination of bendiocarb and promecarb: response surface methodology.

A new extraction method, based on Dispersive Nano-Solid material-Ultrasound Assisted Micro-Extraction (DNSUAME), was used for the preconcentration of the bendiocarb and promecarb pesticides in the water samples prior to high performance liquid chromatography (HPLC). The properties of NiZnS nanomaterial loaded on activated carbon (NiZnS-AC) are characterized by FT-IR, TEM, and BET. This novel nanomaterial showed great adsorptive ability towards the bendiocarb and promecarb pesticides.

Determination of trace elements in soil, leaves and fruits of Quercus brantii grown in southwestern Iran by atomic spectroscopy.

Quercus brantii acorn is rich of some useful mineral elements such as K, Fe and Zn. The content of these mineral elements in Quercus are dependent on their region and environmental conditions. Q.

Study on different forms and phosphorus distribution in the coastal surface sediments of Southern Caspian Sea by using UV-Vis spectrophotometery.

This paper presents distribution of phosphorus (total P, organic and inorganic P) in the southern of Caspian Sea sediments where collected from four sampling stations in the summer 2009. Several forms of the phosphorus in sediment were separated and extracted according to sequential extraction method. Then extracted phosphorus in each fraction was determined by UV-Vis spectrophotometery.

Optimization of dispersive liquid-liquid microextraction with central composite design for preconcentration of chlordiazepoxide drug and its determination by HPLC-UV.

A simple, rapid, and sensitive method based on dispersive liquid-liquid microextraction combined with HPLC-UV detection applied for the quantification of chlordiazepoxide in some real samples. The effect of different extraction conditions on the extraction efficiency of the chlordiazepoxide drug was investigated and optimized using central composite design as a conventional efficient tool. Optimum extraction condition values of variables were set as 210 μL chloroform, 1.