Physicochemical, structural, and functional characterization of pectin extracted from quince and pomegranate peel: A comparative study.

Pectin's physicochemical, structural, and functional characteristics vary widely depending on the source of extraction. In this study, pectins were extracted from seedless quince and pomegranate peel, and their physicochemical, structural, and functional properties were investigated. A Box-Behnken Design with three factors and three levels was applied to optimize the pectin extraction yield from each matrix.

Evaluation of Time-Dependent Corrosion Inhibition Rate for f-MWCNT-BCP Composite Coatings on 316L Stainless Steel in Simulated Body Fluid for Orthopedic Implantation.

A well-developed-multiwall carbon nanotube (f-MWCNT)/biphasic calcium phosphate (BCP) composites were synthesized using ultrasonication method for orthopedic implantation applications. The formation of composites and its phase was confirmed by using X-ray diffraction. The presence of various functional groups was identified by using Fourier transform infra-red (FT-IR) spectroscopy.

Elemental and experimental analysis of modified stent's structure under uniaxial compression load.

Additive manufacturing has enabled the fabrication of lightweight complex metamaterials that possess high energy absorption and impact resistance properties. Stents, a typical 3D auxetic material, have significant self-expanding behavior, and their mechanical properties can be finely tuned over a wide range. In this study, we systematically analyzed three distinctive elastic-plastic regions using experimental, numerical simulations, and theoretical analysis, focusing on investigating the energy absorption capability of a designed structure by varying tessellated unit cell numbers in two section views in X- and Y-direction.

hemocompatibility studies on small-caliber stents for cardiovascular applications.

The doping of biologically meaningful ions into biphasic calcium phosphate (BCP) bioceramics, which exhibit biocompatibility with human body parts, has led to their effective use in biomedical applications in recent years. Doping with metal ions while changing the characteristics of the dopant ions, an arrangement of various ions in the Ca/P crystal structure. In our work, small-diameter vascular stents based on BCP and biologically appropriate ion substitute-BCP bioceramic materials were developed for cardiovascular applications.

A review on borate bioactive glasses (BBG): effect of doping elements, degradation, and applications.

Because of their excellent biologically active qualities, bioactive glasses (BGs) have been extensively used in the biomedical domain, leading to better tissue-implant interactions and promoting bone regeneration and wound healing. Aside from having attractive characteristics, BGs are appealing as a porous scaffold material. On the other hand, such porous scaffolds should enable tissue proliferation and integration with the natural bone and neighboring soft tissues and degrade at a rate that allows for new bone development while preventing bacterial colonization.

Acellular bioactivity and drug delivery of new strontium doped bioactive glasses prepared through a hydrothermal process.

This work aims to study the kinetics of apatite layer formation on the surface of strontium doped binary bioactive glasses (BG: 63S37C) prepared for the first time by a hydrothermal process and evaluate their potential for drug loading and release using ibuprofen (IBU) as an anti-inflammatory drug vector. First, the binary glass 63S37C was doped with various amounts of strontium, from 0.2 to 1 mol%.

[Performance of orthodontic aligners in the aging process: systematic review and in vitro study].

Introduction: The objective of this study was to evaluate, through a systematic review of the literature and an in vitro study, the alteration of the mechanical and chemical properties of aligners after aging in artificial saliva and in the oral cavity.

Materials And Methods: A systematic literature review was carried out, through an electronic consultation of three databases: PubMed, EBSCO and Sciencedirect, between September 2018 and January 2020. The search was guided by the use of several specific keywords.

Investigation on exopolysaccharide production by Lacticaseibacillus rhamnosus P14 isolated from Moroccan raw cow's milk.

Twenty-four strains were isolated from 50 samples of raw cow's milk originated from different regions of Morocco. After different screening methods, one strain was selected as the highest exopolysaccharide (EPS)-producing isolate and was identified by 16S rDNA sequencing as Lacticaseibacillus rhamnosus P14. Moreover, the EPS-producing ability, bacterial growth, and pH of the medium were monitored.

Mesoporous bioactive glass nanoparticles doped with magnesium: drug delivery and acellular bioactivity.

The effects of the magnesium doping of binary glass (Si-Ca) on particle texture, on the biomineralization process in simulated body fluid (SBF) as well as on drug loading and release were examined. For this purpose, magnesium-doped binary bioglass nanoparticles (85SiO-(15 - )CaO-MgO, with = 1, 3, 5 and 10 mol%) were prepared by a base catalysed sol-gel method. N adsorption isotherm analysis showed an enhancement in specific surface area as the Mg molar fraction increased.

Degradation of the mechanical properties of orthodontic NiTi alloys in the oral environment: an in vitro study.

Appropriate characterization studies are needed to demonstrate the mechanical and biological effects of interaction between archwires and the oral environment. The aim of this study was to investigate, in vitro, the impact of this acidic and fluoridated environment on the electrochemical behavior and the mechanical properties of orthodontic alloys in nickel titanium and in stainless steel (controls) for the following parameters: Young's modulus (E), elastic limit (σe) and the maximum tensile load (σm). Six samples of each archwire alloy were used to assess these parameters.

Fostering hydroxyapatite bioactivity and mechanical strength by Si-doping and reinforcing with multiwall carbon nanotubes.

The aim of the present study was to prepare resorbable hydroxyapatite (HA) based bone graft materials reinforced with carbon nanotubes as a way to cope with the inability of pure HA to resorb and its intrinsic brittleness and poor strength that restrict its clinical applications under load-bearing conditions. With this purpose, a Si-doped HA nanopowder (n-Si0.8HA) was prepared by chemical synthesis and used as composite matrix reinforced with different amounts of functionalized multiwall carbon nanotubes (MWCNTs).

Surfactant-assisted hydrothermal synthesis of hydroxyapatite nanopowders.

Rod-like hydroxyapatite nanoparticles (n-HAp) with a highly ordered nanostructure were prepared by hydrothermal synthesis from calcium chloride, and phosphoric acid, as calcium and phosphorus sources, respectively. Various surfactant families such as cationic (CTAB), anionic (SDS) and nonionic (Triton X-100) were used as regulators of the nucleation and crystal growth. The synthesized nanopowders were characterized using X-ray diffraction (XRD), Fourier transform infrared spectrograph (FTIR) and transmission electron microscopy (TEM).

Effect of shear on phase-separation in polystyrene/poly(vinyl methyl ether)/ organoclay nanocomposites.

Blends of polystyrene (PS)/poly(vinyl methyl ether) (PVME) modified with two types of organoclay were prepared by solution casting from toluene. The effect of clay addition on the phase separating morphology of PS/PVME blend with critical composition (25/75) was examined both under quiescent conditions and under shear flow. The variation in critical temperature of phase separation was assessed by rheology, small angle laser light scattering (SALLS) and by on-line laser light transmission during shearing at fixed shear rate during heating.

Dispersion characteristics and properties of poly(methyl methacrylate)/multi-walled carbon nanotubes nanocomposites.

The preparation, characterization, and properties of poly(methyl methacrylate) (PMMA)/multi-walled carbon nanotubes (MWCNTs) nanocomposites are described. Nanocomposites have been prepared by melt-blending in a batch mixer. Both unmodified and surface modified MWCNTs have been used for the nanocomposites preparation.

Phase separation in PS/PVME thin and thick films.

Phase separation in both thin and thick films of polystyrene (PS) and poly(vinyl methyl ether) (PVME) was studied by small-angle laser light scattering (SALLS), atomic force microscopy (AFM), optical microscopy, and X-ray photoelectron spectroscopy (XPS). Blend films with controlled thickness were obtained by spin-coating polymer-toluene solutions with various concentrations. Films with thicknesses smaller and larger than the maximum wavelength of concentration fluctuations were considered.

Phase separation of polystyrene/poly(vinylmethylether)/organoclay nanocomposites.

The effect of addition of organically modified montmorillonite (OMMT) on the phase separation of polystyrene (PS)/poly(vinyl methyl ether) (PVME) blend was examined. Using two types of OMMT modified with two different kinds of surfactants, the effect of organic modification on nanocomposites was investigated by focusing on three major aspects: phase transition, morphological study, and melt rheological behavior both below and above the critical transition temperature. X-ray diffraction (XRD) patterns revealed the formation of intercalated nanocomposites and transmission electron micrographic (TEM) observations showed that the ordering of silicate layers in blend matrix is well matched with the XRD patterns.