Adsorption of aqueous insensitive munitions compounds by graphene nanoplatelets.

Mitigation strategies for potential environmental impacts of insensitive munition (IM) compounds, including 2,4-dinitroanisole (DNAN), 3-nitro-1,2,4-triazol-5-one (NTO), nitroguanidine (NQ), and methylnitroguanidine, (MeNQ) are being considered to enhance sustainability of current or potential IM formulations. Graphene nanoplatelets (GnPs) were investigated for adsorptive removal of each compound. GnPs were characterized to determine surface areas, along with particle size and zeta potential at different pH and ionic strength conditions.

Flash-within-flash synthesis of gram-scale solid-state materials.

Sustainable manufacturing that prioritizes energy efficiency, minimal water use, scalability and the ability to generate diverse materials is essential to advance inorganic materials production while maintaining environmental consciousness. However, current manufacturing practices are not yet equipped to fully meet these requirements. Here we describe a flash-within-flash Joule heating (FWF) technique-a non-equilibrium, ultrafast heat conduction method-to prepare ten transition metal dichalcogenides, three group XIV dichalcogenides and nine non-transition metal dichalcogenide materials, each in under 5 s while in ambient conditions.

Electrothermal mineralization of per- and polyfluoroalkyl substances for soil remediation.

Per- and polyfluoroalkyl substances (PFAS) are persistent and bioaccumulative pollutants that can easily accumulate in soil, posing a threat to environment and human health. Current PFAS degradation processes often suffer from low efficiency, high energy and water consumption, or lack of generality. Here, we develop a rapid electrothermal mineralization (REM) process to remediate PFAS-contaminated soil.

Graphene Derived from Municipal Solid Waste.

Landfilling is long the most common method of disposal for municipal solid waste (MSW). However, many countries seek to implement different methods of MSW treatment due to the high global warming potential associated with landfilling. Other methods such as recycling and incineration are either limited to only a fraction of generated MSW or still produce large greenhouse gas emissions, thereby providing an unsustainable disposal method.

Automated Laboratory Kilogram-Scale Graphene Production from Coal.

The flash Joule heating (FJH) method converts many carbon feedstocks into graphene in milliseconds to seconds using an electrical pulse. This opens an opportunity for processing low or negative value resources, such as coal and plastic waste, into high value graphene. Here, a lab-scale automation FJH system that allows the synthesis of 1.

High-temperature electrothermal remediation of multi-pollutants in soil.

Soil contamination is an environmental issue due to increasing anthropogenic activities. Existing processes for soil remediation suffer from long treatment time and lack generality because of different sources, occurrences, and properties of pollutants. Here, we report a high-temperature electrothermal process for rapid, water-free remediation of multiple pollutants in soil.

Battery metal recycling by flash Joule heating.

The staggering accumulation of end-of-life lithium-ion batteries (LIBs) and the growing scarcity of battery metal sources have triggered an urgent call for an effective recycling strategy. However, it is challenging to reclaim these metals with both high efficiency and low environmental footprint. We use here a pulsed dc flash Joule heating (FJH) strategy that heats the black mass, the combined anode and cathode, to >2100 kelvin within seconds, leading to ~1000-fold increase in subsequent leaching kinetics.

Synthesis of Clean Hydrogen Gas from Waste Plastic at Zero Net Cost.

Hydrogen gas (H ) is the primary storable fuel for pollution-free energy production, with over 90 million tonnes used globally per year. More than 95% of H is synthesized through metal-catalyzed steam methane reforming that produces 11 tonnes of carbon dioxide (CO ) per tonne H . "Green H " from water electrolysis using renewable energy evolves no CO , but costs 2-3× more, making it presently economically unviable.

Graphene as a rational interface for enhanced adsorption of microcystin-LR from water.

Cyanotoxins such as microcystin-LR (MC-LR) represent a global environmental threat to ecosystems and drinking water supplies. The study investigated the direct use of graphene as a rational interface for removal of MC-LR via interactions with the aromatic ring of the ADDA chain of MC-LR and the sp hybridized carbon network of graphene. Intra-particle diffusion model fit indicated the high mesoporosity of graphene provided significant enhancements to both adsorption capacities and kinetics when benchmarked against microporous granular activated carbon (GAC).

Upcycling of Waste Plastic into Hybrid Carbon Nanomaterials.

Graphitic 1D and hybrid nanomaterials represent a powerful solution in composite and electronic applications due to exceptional properties, but large-scale synthesis of hybrid materials has yet to be realized. Here, a rapid, scalable method to produce graphitic 1D materials from polymers using flash Joule heating (FJH) is reported. This avoids lengthy chemical vapor deposition and uses no solvent or water.

Flash Recycling of Graphite Anodes.

The ever-increasing production of commercial lithium-ion batteries (LIBs) will result in a staggering accumulation of waste when they reach their end of life. A closed-loop solution, with effective recycling of spent LIBs, will lessen both the environmental impacts and economic cost of their use. Presently, <5% of spent LIBs are recycled and the regeneration of graphite anodes has, unfortunately, been mostly overlooked despite the considerable cost of battery-grade graphite.

Turbostratic Boron-Carbon-Nitrogen and Boron Nitride by Flash Joule Heating.

Turbostratic layers in 2D materials have an interlayer misalignment. The lack of alignment expands the intrinsic interlayer distances and weakens the optical and electronic interactions between adjacent layers. This introduces properties distinct from those structures with well-aligned lattices and strong coupling interactions.

Holey and Wrinkled Flash Graphene from Mixed Plastic Waste.

High surface area varieties of graphene have captured significant attention, allowing for improved performance in a variety of applications. However, there are challenges facing the use of graphene in these applications since it is expensive and difficult to synthesize in bulk. Here, we leverage the capabilities of flash Joule heating to synthesize holey and wrinkled flash graphene (HWFG) in seconds from mixed plastic waste feedstocks, using salt decomposition to produce and stabilize pore formation during the reaction.

Heteroatom-Doped Flash Graphene.

Heteroatom doping can effectively tailor the local structures and electronic states of intrinsic two-dimensional materials, and endow them with modified optical, electrical, and mechanical properties. Recent studies have shown the feasibility of preparing doped graphene from graphene oxide and its derivatives via some post-treatments, including solid-state and solvothermal methods, but they require reactive and harsh reagents. However, direct synthesis of various heteroatom-doped graphene in larger quantities and high purity through bottom-up methods remains challenging.

Machine Learning Guided Synthesis of Flash Graphene.

Advances in nanoscience have enabled the synthesis of nanomaterials, such as graphene, from low-value or waste materials through flash Joule heating. Though this capability is promising, the complex and entangled variables that govern nanocrystal formation in the Joule heating process remain poorly understood. In this work, machine learning (ML) models are constructed to explore the factors that drive the transformation of amorphous carbon into graphene nanocrystals during flash Joule heating.

Large-Scale Syntheses of 2D Materials: Flash Joule Heating and Other Methods.

In the past 17 years, the larger-scale production of graphene and graphene family materials has proven difficult and costly, thus slowing wider-scale commercial applications. The quality of the graphene that is prepared on larger scales has often been poor, demonstrating a need for improved quality controls. Here, current industrial graphene synthetic and analytical methods, as well as recent academic advancements in larger-scale or sustainable synthesis of graphene, defined here as weights more than 200 mg or films larger than 200 cm , are compiled and reviewed.

Ultrafast and Controllable Phase Evolution by Flash Joule Heating.

Flash Joule heating (FJH), an advanced material synthesis technique, has been used for the production of high-quality carbon materials. Direct current discharge through the precursors by large capacitors has successfully converted carbon-based starting materials into bulk quantities of turbostratic graphene by the FJH process. However, the formation of other carbon allotropes, such as nanodiamonds and concentric carbon materials, as well as the covalent functionalization of different carbon allotropes by the FJH process, remains challenging.

Bulk Production of Any Ratio C:C Turbostratic Flash Graphene and Its Unusual Spectroscopic Characteristics.

As graphene enjoys worldwide research and deployment, the biological impact, geologic degradation, environmental retention, and even some physical phenomena remain less well studied. Bulk production of C-graphene yields a powerful route to study all of these questions. Gram-scale synthesis of high-quality and high-purity turbostratic flash graphene with varying amounts of C-enrichment, from 5% to 99%, is reported here.

High-Resolution Laser-Induced Graphene from Photoresist.

The fabrication of patterned graphene electronics at high resolution is an important challenge for many applications in microelectronics. Here, we demonstrate the conversion of positive photoresist (PR), commonly employed in the commercial manufacture of consumer electronics, into laser-induced graphene (LIG). Sequential lasing converts the PR photopolymer first into amorphous carbon, then to photoresist-derived LIG (PR-LIG).

Biochemometrics and Required Tools in Botanical Natural Products Research: A Review.

This review serves to highlight the role of chemometrics and biochemometrics in recent literature as well as including a perspective on the current state of the field, as well as the future needs and possible directions. Specifically examining the analytical methods and statistical tools that are available to chemists, current applications of QTOF-MS, Orbitrap-MS, LC with PDA/UV detectors, NMR, and IMS coupled MS are detailed. Of specific interest, these techniques can be applied to botanical dietary supplement quality, efficacy, and safety.