A pilot-scale steam autoclave system for treating municipal solid waste for recovery of renewable organic content: Operational results and energy usage.

A pilot-scale (1800 kg per batch capacity) autoclave used in this study reduces municipal solid waste to a debris contaminated pulp product that is efficiently separated into its renewable organic content and non-renewable organic content fractions using a rotary trommel screen. The renewable organic content can be recovered at nearly 90% efficiency and the trommel rejects are also much easier to sort for recovery. This study provides the evaluation of autoclave operation, including mass and energy balances for the purpose of integration into organic diversion systems.

Countercurrent extraction of soluble sugars from almond hulls and assessment of the bioenergy potential.

Almond hulls contain considerable proportions (37% by dry weight) of water-soluble, fermentable sugars (sucrose, glucose, and fructose), which can be extracted for industrial purposes. The maximum optimal solids loading was determined to be 20% for sugar extraction, and the addition of 0.5% (w/v) pectinase aided in maintaining a sufficient free water volume for sugar recovery.

Chemical structure and heterogeneity differences of two lignins from loblolly pine as investigated by advanced solid-state NMR spectroscopy.

Advanced solid-state NMR was employed to investigate differences in chemical structure and heterogeneity between milled wood lignin (MWL) and residual enzyme lignin (REL). Wiley and conventional milled woods were also studied. The advanced NMR techniques included 13C quantitative direct polarization, various spectral-editing techniques, and two-dimensional 1H-13C heteronuclear correlation NMR with 1H spin diffusion.

Agricultural chemistry and bioenergy.

Renewed interest in converting biomass to biofuels such as ethanol, other forms of bioenergy, and bioenergy byproducts or coproducts of commercial value opens opportunities for chemists, including agricultural chemists and related disciplines. Applications include feedstock characterization and quantification of structural changes resulting from genetic modification and of the intermediates formed during enzymatic and chemical processing; development of improved processes for utilizing chemical coproducts such as lactic acid and glycerol; development of alternative biofuels such as methanol, butanol, and hydrogen; and ways to reduce greenhouse gas emission and/or use carbon dioxide beneficially. Chemists will also be heavily involved in detailing the phytochemical composition of alternative energy crops and genetically improved crops.

Heat expanded starch-based compositions.

A heat expansion process similar to that used for expanded bead polystyrene was used to expand starch-based compositions. Foam beads made by solvent extraction had the appearance of polystyrene beads but did not expand when heated due to an open-cell structure. Nonporous beads, pellets, or particles were made by extrusion or by drying and milling cooked starch slurries.

Differences between lignin in unprocessed wood, milled wood, mutant wood, and extracted lignin detected by 13C solid-state NMR.

Solid-state 13C nuclear magnetic resonance (NMR) spectroscopy was applied to intact and isolated loblolly pine wood samples to identify potential structural changes induced by tree age, milling, lignin extraction, or naturally occurring mutations. Special attention was paid to ketone and aldehyde as well as nonpolar alkyl groups, which could be observed at low concentrations (<2 in 1000 C) using improved spinning-sideband suppression with gated decoupling. Carbonyl structures were present in intact wood, and there are more keto groups than aldehydes.

Solution-state nuclear magnetic resonance study of the similarities between milled wood lignin and cellulolytic enzyme lignin.

The structures of milled wood lignin (MWL) and cellulolytic enzyme lignin (CEL) have been analyzed using traditional chemical methods and solution-state NMR techniques. Comparisons of the results obtained reveal that subtle differences exist between the two lignin preparations. Thioacidolysis produced higher monomer yields from CEL than MWL, suggesting MWL has a more condensed structure.

Elucidation of lignin structure through degradative methods: comparison of modified DFRC and thioacidolysis.

Milled wood and milled wood lignin (MWL) samples were subjected to DFRC and thioacidolysis. Despite the fact that both methods selectively cleave aryl ether bonds, substantial differences in results were obtained. Lignin thioacidolysis gave total molar yields of degradation monomer products in the range of 3.

Studies on the effect of ball milling on lignin structure using a modified DFRC method.

The structures of milled wood lignin (MWL), cellulolytic enzyme lignin (CEL), and residual lignin (REL) from a loblolly pine were analyzed using a modified derivatization followed by reductive cleavage (DFRC) method developed to allow the quantitative determination of three different structural monomeric products originating in lignin: phenolic beta-O-4, alpha-O-4, and etherified beta-O-4 structures. Results show that MWL and CEL are structurally identical, with an increased phenolic beta-O-4 content compared to that of the original Wiley milled wood. These results indicate that the portion of lignin linked to carbohydrates and that not linked to carbohydrates are structurally the same.