Further research into alternative carrier solvents for the detection of latent fingermarks.

A number of solvents, (Solstice PF, Opteon SF33 and Amolea AS-300), are compared to the recommended carrier solvent of HFE7100 for the ninhydrin and 1,2-indandione formulations. As the supply of HFE7100 will cease by the end of 2025, suitable alternatives are required in the short-term to ensure the detection of latent fingermarks on porous surfaces is still effective. Although these solvents, with the exception of Amolea AS-300, are classified as per- and polyfluoroalkyl substances (PFAS); they are not classed as hazardous.

Technical note: A preliminary assessment of UV-C imaging using the Full Spectrum Imaging System (FSIS-II) for the detection of latent fingermarks.

The Full Spectrum Imaging System (FSIS-II) was assessed for the detection of latent fingermarks on a variety of substrates, specifically focusing on UV-C imaging for untreated marks and those that have been treated with cyanoacrylate (CA). The use of UV-C was effective at the detection of latent fingermarks on a variety of substrates and UV-C imaging may be effective when UV-A does not provide any fingermark detections on thermal paper. A Phase 2 and a small Phase 3 trials on aluminium cans were carried out with a detection sequence of UV-C imaging, CA fuming, UV-C imaging, UV-A imaging and BY40.

A pseudo-operational trial: An investigation into the use of longwave reflected UV imaging of cyanoacrylate developed fingermarks.

This work presents a pseudo-operational study on plastic bags for the detection of latent fingermarks with various types of cyanoacrylates, including the two-step process with basic yellow 40 (BY40) staining and one-step fluorescent cyanoacrylates, Lumicyano and Polycyano. The use of longwave reflected UV (LWRUV) was employed as part of sequential development for all processes; however, detected marks were not unique as subsequent BY40 staining detected these marks as well. The use of BY40 in the sequence is very important, as without its inclusion many fingermarks would be missed.

Effect of carrier solvent in 1,2-indanedione formulation on the development of fingermarks on porous substrates.

As an important technique for the detection of fingermarks on porous surfaces, 1,2-indanedione is widely used due to its excellent detection performance. In order to optimize the effectiveness of 1,2-indanedione, several institutions have modified the original formulation. In this study, four different 1,2-indanedione formulations were used to treat fingermarks deposited on different porous substrates to determine the most suitable formulation and whether Solstice-PF can be an alternative carrier solvent for the currently used HFE7100.

On a knife edge: A preliminary investigation of clothing damage using rounded-tip knives.

Bladed weapons are frequently encountered in violent crime offences including street based and armed robberies, murder, sexual assaults and terrorism. A study was conducted involving four frequently encountered clothing fabrics: t-shirt (knitted cotton), denim jeans (twill woven cotton), long sleeved top (knitted synthetic blend), and skirt (non-woven faux leather) and five knives to investigate any damage resulting from a downward stabbing motion, with 300 stabs in total. Any resultant penetrating severance damage was then photographed, measured and analysed.

The optimisation of fingermark enhancement by VMD and Lumicyano™ on thermal paper.

The enhancement of fingermarks on thermal paper can be challenging due to background staining caused by polar solvents used in fingermark enhancement techniques such as ninhydrin. This study explored a commercial one-step superglue fuming process, Lumicyano™, and Vacuum Metal Deposition (VMD) to develop fingermarks on this substrate and overcome this issue. Different sequential treatments involving Lumicyano™ and a combination of VMD methods were investigated with varying degrees of success with some sequences being highly sensitive.

Evaluation of a Hot Print System for the development of latent fingermarks on thermal paper: A pseudo-operational trial.

Enhancement of latent fingermarks on thermal paper poses a number of problems when using traditional methods used for porous substrates due to blackening of the thermal layer as a result of polar solvents present within the reagents and high temperatures oxidising the acid/dye complex. Thus, methods which prevent such reactions are favoured for the development of latent prints on said substrates. A comparative pseudo-operational trial using UV, Hot Print System (HPS), ninhydrin and ThermaNIN was performed on 1000 thermal paper substrates gathered from various sources.

An assessment of a portable cyanoacrylate fuming system (LumiFume™) for the development of latent fingermarks.

The effectiveness and suitability of a portable cyanoacrylate fuming system (LumiFume™) with Lumicyano™ at detecting latent fingermarks was assessed. The first phase of the study compared the LumiFume™ system with traditional cabinet fuming and black/white powder suspension for the development of latent fingermarks on a variety of surfaces (glass, plastic bin bag, laminated wood and tile) by means of depletion series' from 10 donors and four ageing periods (1, 7, 14 and 28 days). The portable fuming system provided superior quality of developed marks on glass and laminated wood whereas powder suspension was better on bin bags and all three techniques were comparable on tile.

Further Pseudo-Operational Trials with the Lumicyano Double- and Co-Fuming Process for the Detection of Latent Fingermarks.

This study presents a number of pseudo-operational trials on plastic bags investigating the double- and co-fuming process of a one-step fluorescent cyanoacrylate (Lumicyano ) in comparisons with the two-step process with basic yellow 40 (BY40) staining for the detection of latent fingermarks. The results demonstrate that both Lumicyano solution and dye contribute to the increased detection of latent fingermarks during the double-fuming process (trial 1). Co-fuming the Lumicyano solution and dye separately (at a concentration of 8%) but simultaneously was less effective than 8% Lumicyano (trial 2).

The effect of mark enhancement techniques on the presumptive and confirmatory tests for blood.

An investigation into the effects of physical and chemical enhancement on subsequent presumptive and confirmatory tests for human blood is presented. Human blood was deposited onto porous (white 80 gsm paper and brown envelope) and non-porous (tile and linoleum) substrates in a depletion series (30 depletions on non-porous and 20 on porous) and subjected to three ageing periods; 1, 7 and 28 days. A number of enhancement techniques were tested [fluorescence, black magnetic powder (BMP), iron-oxide black powder suspension (PS), cyanoacrylate (CA) fuming, acid violet 17 (AV17), acid yellow 7 (AY7), ninhydrin, DFO and Bluestar Forensic Magnum (BFM) luminol] to evaluate their potential effects on subsequent presumptive and confirmatory tests.

An alternative carrier solvent for fingermark enhancement reagents.

Solstice Performance Fluid (PF), trans-1-chloro-3,3,3-trifluoropropene, is presented as an alternative to HFE7100, methoxy-nonafluorobutane, as a carrier solvent in a number of chemical formulations used for the visualisation of latent fingermarks. The supply of HFE7100 may be at risk due to a recent European Union regulation to control global warming. Laboratory trials using split depletions and a pseudo-operational trial of 1000 porous samples have shown that Solstice PF is a viable alternative to HFE7100 for the chemical formulations of ninhydrin and 1,2-indanedione.

The effect of mark enhancement techniques on the subsequent detection of saliva.

There appears to be a limited but growing body of research on the sequential analysis/treatment of multiple types of evidence. The development of an integrated forensic approach is necessary to maximise evidence recovery and to ensure that a particular treatment is not detrimental to other types of evidence. This study aims to assess the effect of latent and blood mark enhancement techniques (e.

A comparison between atmospheric/humidity and vacuum cyanoacrylate fuming of latent fingermarks.

A number of pseudo-operational trials were set up to compare the atmospheric/humidity and vacuum cyanoacrylate fuming processes on plastic carrier bags. The fuming processes were compared using two-step cyanoacrylate fuming with basic yellow 40 (BY40) staining and a one-step fluorescent cyanoacrylate fuming, Lumicyano 4%. Preliminary work using planted fingermarks and split depletions were performed to identify the optimum vacuum fuming conditions.

An investigation into the detection of latent marks on the feathers and eggs of birds of prey.

There are numerous enhancement techniques (physical and chemical) which have been developed for the successful visualisation of latent fingermarks. Nonetheless, problems arise when latent fingermarks require enhancement on difficult surfaces such as human skin, food stuffs, fabric and animals. The ability to develop latent fingermarks on the surface of bird of prey feathers and that of their eggs was investigated.

The effect of mark enhancement techniques on the subsequent detection of semen/spermatozoa.

Fingermarks, footwear marks, blood and semen are amongst the most commonly encountered types of evidence at crime scenes. Previous work has extensively investigated fingermark and blood enhancement techniques and a sequence developed to maximise evidence recovery; however, there is limited research as to the effect of these techniques on the subsequent detection of body fluids such as semen. In this study, seven fingermark and blood enhancement techniques (e.

A preliminary investigation into the use of alginates for the lifting and enhancement of fingermarks in blood.

Recent studies have reported the use of alginate in the lifting and subsequent enhancement of footwear marks in blood. A study was set up to assess the use of such a method in the treatment of fingermarks in blood on a variety of porous, non-porous and semi-porous surfaces. Other variables included ageing of the fingermarks in blood and the application of chemicals prior to or post-alginate lifting.

Evaluation of Lumicyano™ cyanoacrylate fuming process for the development of latent fingermarks on plastic carrier bags by means of a pseudo operational comparative trial.

There are a number of studies discussing recent developments of a one-step fluorescent cyanoacrylate process. This study is a pseudo operational trial to compare an example of a one-step fluorescent cyanoacrylate product, Lumicyano™, with the two recommended techniques for plastic carrier bags; cyanoacrylate fuming followed by basic yellow 40 (BY40) dyeing and powder suspensions. 100 plastic carrier bags were collected from the place of work and the items were treated as found without any additional fingermark deposition.

An investigation into the enhancement of fingermarks in blood on fruit and vegetables.

A number of studies have reported the successful enhancement of latent fingermarks on fruit and vegetables. A study was set up to identify the most effective technique for the enhancement of fingermarks in blood on various fruit and vegetables. The enhancement techniques targeted different components in blood and consisted of protein stains (e.

An investigation into the enhancement of fingermarks in blood on paper with genipin and lawsone.

The abilities of two natural products, genipin and lawsone, to enhance blood contaminated fingermarks on papers of various porosities and colour were investigated and compared to the routinely used amino acid reagents, ninhydrin and 1,8-diazafluoren-9-one (DFO). Fingermarks in blood were deposited as a split depletion series on various paper types and colours for ageing periods of 6 weeks, 4 weeks, 2 weeks and 1 week before enhancement. The developed marks were observed under different lighting conditions, recorded and graded by way of attributing quantitative data to each series.

A comparison of enhancement techniques for footwear impressions on dark and patterned fabrics.

The use of chemical enhancement techniques on porous substrates, such as fabrics, poses several challenges predominantly due to the occurrence of background staining and diffusion as well as visualization difficulties. A range of readily available chemical and lighting techniques were utilized to enhance footwear impressions made in blood, soil, and urine on dark and patterned fabrics. Footwear impressions were all prepared at a set force using a specifically built footwear rig.

A preliminary investigation into the acquisition of fingerprints on food.

The potential for enhancement and recovery of latent fingerprints on a variety of foodstuffs has been investigated. In general, black magnetic powder and black powder suspensions appear to be the most successful enhancement techniques with a high number of ridge detail-developed prints over a selected time scale. Banana, apple and tomato surfaces showed enhancement of latent prints but potato and egg surfaces proved to be less successful.

Chemical enhancement of footwear impressions in blood on fabric - part 3: amino acid staining.

Enhancement of footwear impressions, using ninhydrin or ninhydrin analogues is not considered common practice and such techniques are generally used to target amino acids present in fingermarks where the reaction gives rise to colour and possibly fluorescence. Ninhydrin and two of its analogues were used for the enhancement of footwear impressions in blood on various types, colours and porosities of fabric. Test footwear impressions on fabric were prepared using a specifically built rig to minimise the variability between each impression.

Controlling the variable of pressure in the production of test footwear impressions.

Footwear impression lifting and enhancement techniques may be affected by several variables introduced during the production of test footwear impressions, thus limiting the usefulness of enhancement technique comparisons and the results obtained. One such variable is the force applied when the impressed mark is being made. Producing consistent test impressions for research into footwear enhancement techniques would therefore be beneficial.

Chemical enhancement of soil based footwear impressions on fabric.

This study investigates the enhancement of footwear impressions prepared with soils from different locations on a variety of fabric surfaces with different morphology. Preliminary experiments using seventeen techniques were carried out and the best responding reagents were evaluated further. Results indicated that the soils investigated (a cross-section of soils from Scotland) are more likely to respond to reagents that target iron ions rather than calcium, aluminium or phosphorus ions.

Chemical enhancement of footwear impressions in blood on fabric - part 2: peroxidase reagents.

This study investigates the optimisation of peroxidase based enhancement techniques for footwear impressions made in blood on various fabric surfaces. Four different haem reagents: leuco crystal violet (LCV), leuco malachite green (LMG), fluorescein and luminol were used to enhance the blood contaminated impressions. The enhancement techniques in this study were used successfully to enhance the impressions in blood on light coloured surfaces, however, only fluorescent and/or chemiluminescent techniques allowed visualisation on dark coloured fabrics, denim and leather.