Airlift bioreactor-based strategies for prolonged semi-continuous cultivation of edible Agaricomycetes.

Submerged cultivation of edible filamentous fungi (Agaricomycetes) in bioreactors enables maximum mass transfer of nutrients and has the potential to increase the volumetric productivity of fungal biomass compared to solid state cultivation. These aspects are paramount if one wants to increase the range of bioactives (e.g.

Dietary Hydroxytyrosol Supplementation on Growth Performance, Gut Morphometry, and Oxidative and Inflammatory Status in LPS-Challenged Broilers.

This study assessed the effects of hydroxytyrosol (HT) on 8- to 20-day-old broilers challenged with lipopolysaccharide (LPS); 180 Cobb500™ male chicks were randomly assigned to 3 treatment groups, each comprising 10 replicates with 6 birds per replicate. Treatments included a control diet (CON), CON with LPS administration, and CON + LPS supplemented with 10 mg of HT/kg of feed. LPS was administered intraperitoneally on days 14, 16, 18, and 20.

Effects of Hydroxytyrosol Supplementation on Performance, Fat and Blood Parameters of Broiler Chickens.

The study aimed to evaluate the effects of dietary supplementation of hydroxytyrosol (HT) on performance, fat, and blood parameters of broilers. In total, 960 male chicks were distributed into four treatments groups with 12 replicates with 20 birds per pen, with varying HT levels (0, 5, 10, and 50 mg/kg of feed) added to the basal diet from 1 to 42 days old. Feed intake, body weight gain, and feed conversion ratio were evaluated.

Pseudomonas umsongensis GO16 as a platform for the in vivo synthesis of short and medium chain length polyhydroxyalkanoate blends.

Polyhydroxyalkanoates (PHAs) are biological polyesters, viewed as a replacement for petrochemical plastic. However, they suffer from suboptimal physical and mechanical properties. Here, it was shown that a metabolically versatile Pseudomonas umsongensis GO16 can synthesise a blend of short chain length (scl) and medium chain length (mcl)-PHA.

β-oxidation-polyhydroxyalkanoates synthesis relationship in Pseudomonas putida KT2440 revisited.

Pseudomonas putida KT2440 is a well-known model organism for the medium-chain-length (mcl) polyhydroxyalkanoate (PHA) accumulation. (R)-Specific enoyl-coenzyme A hydratase (PhaJ) was considered to be the main supplier of monomers for PHA synthesis by converting the β-oxidation intermediate, trans-2-enoyl-CoA to (R)-3-hydroxyacyl-CoA when fatty acids (FA) are used. Three PhaJ homologues, PhaJ1, PhaJ4 and MaoC, are annotated in P.

Identification of genetic variants of the industrial yeast Komagataella phaffii (Pichia pastoris) that contribute to increased yields of secreted heterologous proteins.

The yeast Komagataella phaffii (formerly called Pichia pastoris) is used widely as a host for secretion of heterologous proteins, but only a few isolates of this species exist and all the commonly used expression systems are derived from a single genetic background, CBS7435 (NRRL Y-11430). We hypothesized that other genetic backgrounds could harbor variants that affect yields of secreted proteins. We crossed CBS7435 with 2 other K.

CRISPR-Cas9 Editing of the Synthesis of Biodegradable Polyesters Polyhydroxyalkanaotes (PHA) in Pseudomonas putida KT2440.

Genome editing technologies allow us to study the metabolic pathways of cells and the contribution of each associated enzyme to various processes, including polyhydroxyalkanoate (PHA) synthesis. These biodegradable polyesters accumulated by a range of bacteria are thermoplastic, elastomeric, and biodegradable, thus have great applicative potential. However, several challenges are associated with PHA production, mainly the cost and shortcomings in their physical properties.

A polyhydroxyalkanoates bioprocess improvement case study based on four fed-batch feeding strategies.

The modelling and optimization of a process for the production of the medium chain length polyhydroxyalkanoate (mcl-PHA) by the bacterium Pseudomonas putida KT2440 when fed a synthetic fatty acid mixture (SFAM) was investigated. Four novel feeding strategies were developed and tested using a constructed model and the optimum one implemented in further experiments. This strategy yielded a cell dry weight of 70.

Robust process for high yield conversion of non-degradable polyethylene to a biodegradable plastic using a chemo-biotechnological approach.

In this study, the optimisation of a process for producing medium-chain-length polyhydroxyalkanoate (mcl-PHA) by Pseudomonas putida KT2440 when fed with a polyethene (PE)-derived fatty acid mixture was investigated. The PE was pyrolysed to produce a hydrocarbon wax that was subsequently oxidised to produce a mixture of fatty acids, purified, and used as a PHA substrate for the growth and selection of microorganisms. Based on the shaken flask screening, a production strain, i.

Microbiology challenges and opportunities in the circular economy.

Our knowledge and understanding of micro-organisms have led to the development of safe food, clean water, novel foods, antibiotics, vaccines, healthier plants, animals and soils, and more, which feeds into the United Nations Sustainable Development Goals (UN SDGs). The circular economy can contribute to the UN SDGs and micro-organisms are central to circular nutrient cycles. The circular economy as described by the Ellen MacArthur foundation has two halves, i.

Genome analysis of the metabolically versatile Pseudomonas umsongensis GO16: the genetic basis for PET monomer upcycling into polyhydroxyalkanoates.

The throwaway culture related to the single-use materials such as polyethylene terephthalate (PET) has created a major environmental concern. Recycling of PET waste into biodegradable plastic polyhydroxyalkanoate (PHA) creates an opportunity to improve resource efficiency and contribute to a circular economy. We sequenced the genome of Pseudomonas umsongensis GO16 previously shown to convert PET-derived terephthalic acid (TA) into PHA and performed an in-depth genome analysis.

Recent Advances in Bioplastics: Application and Biodegradation.

The success of oil-based plastics and the continued growth of production and utilisation can be attributed to their cost, durability, strength to weight ratio, and eight contributions to the ease of everyday life. However, their mainly single use, durability and recalcitrant nature have led to a substantial increase of plastics as a fraction of municipal solid waste. The need to substitute single use products that are not easy to collect has inspired a lot of research towards finding sustainable replacements for oil-based plastics.

Polyhydroxyphenylvalerate/polycaprolactone nanofibers improve the life-span and mechanoresponse of human IPSC-derived cortical neuronal cells.

The physico-chemical characteristics of the extracellular matrix (ECM) cause mechanical cues that could elicit responses in the survival rate of cortical neuronal cells. Efficient neurite outgrowth in vitro, is critical for successful cultivation of cortical neuronal cells and the potential for attempts at regeneration of the central nervous system (CNS) in vivo. Relatively soft and hydrophilic, microbially synthesized aromatic polyester, polyhydroxyphenylvalerate (PHPV) was blended 50:50 with the stiff and hydrophobic polycaprolactone (PCL) and electrospun in microfibers for use in a 3D (CellCrown™) configuration and in a 2D coverslip coated configuration.

Novel sodium alkyl-1,3-disulfates, anionic biosurfactants produced from microbial polyesters.

A sodium alkyl disulfate mixture (SADM) synthesised from microbially produced 3-hydroxy fatty acids methyl esters (HFAMEs), showed 13-fold surface tension decrease when compared with the reference surfactant sodium dodecyl sulfate (SDS). Polyhydroxyalkanoates, accumulated by bacteria intracellularly when supplied with a mixture of fatty acids derived from hydrolysed rapeseed oil, were isolated, depolymerised and methylated to produce HFAMEs in very high yield (90%). A sequential chemical reduction and sulfation of the HFAMEs produced the sodium alkyl disulfates in high yields (>65%).

Chemical, physical and biotechnological approaches to the production of the potent antioxidant hydroxytyrosol.

Hydroxytyrosol (HT) is a polyphenol of interest to the food, feed, supplements and pharmaceutical sectors. It is one of the strongest known natural antioxidants and has been shown to confer other benefits such as anti-inflammatory and anti-carcinogenic properties, and it has the potential to act as a cardio- and neuroprotectant. It is known to be one of the compounds responsible for the health benefits of the Mediterranean diet.

Unnatural amino acids: production and biotechnological potential.

Unnatural amino acids (UAAs) are valuable building blocks in the manufacture of a wide range of pharmaceuticals. UAAs exhibit biological activity as free acids and they can be incorporated into linear or cyclic peptides with biological activity. However, the scope of biotechnological application of UAAs goes beyond this, as they can be used to investigate the structure and dynamics of proteins, to study protein interactions, or to modulate the activity of proteins in living cells.

Plastic waste as a global challenge: are biodegradable plastics the answer to the plastic waste problem?

The strength, flexibility and light weight of traditional oil-derived plastics make them ideal materials for a large number of applications, including packaging, medical devices, building, transportation, etc. However, the majority of produced plastics are single-use plastics, which, coupled with a throw-away culture, leads to the accumulation of plastic waste and pollution, as well as the loss of a valuable resource. In this review we discuss the advances and possibilities in the biotransformation and biodegradation of oil-based plastics.

Single point mutations reveal amino acid residues important for Chromobacterium violaceum transaminase activity in the production of unnatural amino acids.

Unnatural amino acids (UAAs) are chiral amines with high application potential in drug discovery and synthesis of other valuable chemicals. Biocatalysis offers the possibility to synthesise novel optically pure UAAs with different physical and chemical properties. While the biocatalytic potential of transaminases in the synthesis of UAAs has been demonstrated, there is still a need to improve the activity with non-native substrates and to understand which amino acids residues are important for activity with these UAAs.

Biodegradable Plastic Blends Create New Possibilities for End-of-Life Management of Plastics but They Are Not a Panacea for Plastic Pollution.

Plastic waste pollution is a global environmental problem which could be addressed by biodegradable plastics. The latter are blended together to achieve commercially functional properties, but the environmental fate of these blends is unknown. We have tested neat polymers, polylactic acid (PLA), polyhydroxybutyrate, polyhydroxyoctanoate, poly(butylene succinate), thermoplastic starch, polycaprolactone (PCL), and blends thereof for biodegradation across seven managed and unmanaged environments.

Biocatalytic versatility of engineered and wild-type tyrosinase from R. solanacearum for the synthesis of 4-halocatechols.

We evaluated the kinetic characteristics of wild type (WT) and three engineered variants (RVC10, RV145, and C10_N322S) of tyrosinase from Ralstonia solanacearum and their potential as biocatalysts to produce halogenated catechols. RV145 exhibited a 3.6- to 14.

Three novel proteins co-localise with polyhydroxybutyrate (PHB) granules in Rhodospirillum rubrum S1.

Polyhydroxybutyrate (PHB), a biodegradable polymer accumulated by bacteria is deposited intracellularly in the form of inclusion bodies often called granules. The granules are supramolecular complexes harbouring a varied number of proteins on their surface, which have specific but incompletely characterised functions. By comparison with other organisms that produce biodegradable polymers, only two phasins have been described to date for Rhodosprillum rubrum, raising the possibility that more await discovery.

Biosynthesis of 2-aminooctanoic acid and its use to terminally modify a lactoferricin B peptide derivative for improved antimicrobial activity.

Terminal modification of peptides is frequently used to improve their hydrophobicity. While N-terminal modification with fatty acids (lipidation) has been reported previously, C-terminal lipidation is limited as it requires the use of linkers. Here we report the use of a biocatalyst for the production of an unnatural fatty amino acid, (S)-2-aminooctanoic acid (2-AOA) with enantiomeric excess > 98% ee and the subsequent use of 2-AOA to modify and improve the activity of an antimicrobial peptide.

Design of a tailor-made platform for syngas bioconversion into polyhydroxybutyrate.

Biodegradable polymers such as polyhydroxybutyrate (PHB) are part of the emerging portfolio of renewable materials, which are addressing the issue of plastic waste. Syngas, as a cheap, renewable and sustainable resource that can be obtained from biomass or waste, is viewed as an excellent feedstock for different bioprocesses, including syngas to PHB bioconversion. However, due to the hazardous nature of syngas, it is of utmost importance to consider safety aspects of the process.

Microbial biotechnology addressing the plastic waste disaster.

Oceans are a major source of biodiversity, they provide livelihood, and regulate the global ecosystem by absorbing heat and CO . However, they are highly polluted with plastic waste. We are discussing here microbial biotechnology advances with the view to improve the start and the end of life of biodegradable polymers, which could contribute to the sustainable use of marine and coastal ecosystems (UN Sustainability development goal 14).

Synthesis Gas (Syngas)-Derived Medium-Chain-Length Polyhydroxyalkanoate Synthesis in Engineered Rhodospirillum rubrum.

Unlabelled: The purple nonsulfur alphaproteobacterium Rhodospirillum rubrum S1 was genetically engineered to synthesize a heteropolymer of mainly 3-hydroxydecanoic acid and 3-hydroxyoctanoic acid [P(3HD-co-3HO)] from CO- and CO-containing artificial synthesis gas (syngas). For this, genes from Pseudomonas putida KT2440 coding for a 3-hydroxyacyl acyl carrier protein (ACP) thioesterase (phaG), a medium-chain-length (MCL) fatty acid coenzyme A (CoA) ligase (PP_0763), and an MCL polyhydroxyalkanoate (PHA) synthase (phaC1) were cloned and expressed under the control of the CO-inducible promoter P from R. rubrum S1 in a PHA-negative mutant of R.