: In response to the COVID-19 pandemic, Australian state and federal governments enacted boarder closures, social distancing measures, and lockdowns. By the end of October 2020, the 112-day lockdown in the Australian state of Victoria was the longest continuous lockdown period internationally. Previous studies have examined how the COVID-19 pandemic and government restrictions have affected Australians' mental health and well-being; however, less is known about the relationship between psychological variables and well-being.
View Article and Find Full Text PDFEvolving technology and the development of new devices that can aerosolize water present a risk for new sources of Legionella bacteria growth and spread within industrial settings. We investigated a cluster of legionellosis among employees of a manufacturing facility in South Carolina, USA, and found 2 unique equipment sources of Legionella bacteria. The cluster of cases took place during August-November 2022; a total of 34 cases of legionellosis, including 15 hospitalizations and 2 deaths, were reported.
View Article and Find Full Text PDFAt the beginning of the COVID-19 pandemic, the primary route of transmission of the SARS-CoV-2 virus was not well understood. Research gathered from other respiratory infectious diseases, including other coronaviruses, was the basis for the initial perceptions for transmission of SARS-CoV-2. To better understand transmission of SARS-CoV-2, a rapid literature review was conducted from literature generated March 19, 2020, through September 23, 2021.
View Article and Find Full Text PDFBoron nitride nanotubes (BNNT) are produced by many different methods leading to variances in physicochemical characteristics and impurities in the final product. These differences can alter the toxicity profile. The importance of understanding the potential pathological implications of this high aspect ratio nanomaterial is increasing as new approaches to synthesize and purify in large scale are being developed.
View Article and Find Full Text PDFBackground: Racism has been identified as a major source of injustice and a health burden in Australia and across the world. Despite the surge in Australian quantitative research on the topic, and the increasing recognition of the prevalence and impact of racism in Australian society, the collective evidence base has yet to be comprehensively reviewed or meta-analysed. This protocol describes the first systematic review and meta-analysis of racism in Australia at the national level, focussing on quantitative studies.
View Article and Find Full Text PDFBackground: Religious-based hate crimes are on the rise worldwide. However, the relationship of religious discrimination on health and well-being, especially earlier on the lifecourse, is largely understudied. This study examines the prevalence of religious discrimination and the relationship it has on social-emotional adjustment and sleep outcomes among a diverse sample of students in Australia.
View Article and Find Full Text PDFBackground: Racism and racial discrimination are fundamental causes and determinants of health and health inequalities globally, with children and adolescents particularly vulnerable. Racial discrimination is a common stressor in the lives of many children and adolescents, with growing evidence of negative associations between racial discrimination and multiple domains of child and adolescent health. Addressing racism and racial discrimination must be core public health priorities, even more so among children and young people.
View Article and Find Full Text PDFIntroduction: Health Data Research UK designated seven UK-based Hubs to facilitate health data use for research. PIONEER is the Hub in Acute Care. PIONEER delivered workshops where patients/public citizens agreed key principles to guide access to unconsented, anonymised, routinely collected health data.
View Article and Find Full Text PDFObjective: To determine the prevalence of direct and vicarious racial discrimination experiences from peer, school and societal sources, and examine associations between these experiences and socioemotional and sleep outcomes.
Methods: Data were analysed from a population representative cross-sectional study of n=4664 school students in years 5-9 (10-15 years of age) in Australia. Students reported direct experiences of racial discrimination from peers, school and societal sources; vicarious discrimination was measured according to the frequency of witnessing other students experiences of racial discrimination.
Recent studies have shown that high concentrations of ultrafine particles can be emitted during the 3D printing process. This study characterized the emissions from different filaments using common fused deposition modeling printers. It also assessed the effectiveness of a novel engineering control designed to capture emissions directly at the extruder head.
View Article and Find Full Text PDFFrom 2011-2015, the National Institute for Occupational Safety and Health Nanotechnology Field Studies Team conducted 11 evaluations at worksites that either produced engineered nanomaterials (ENMs) via a wet process or used ENMs in a wetted, suspended, or slurry form. Wet handling or processing of ENMs reduces potential exposure compared to dry handling or processing; however, air sampling data indicated exposures may still occur. Information was gathered about each company, production processes, ENMs of interest, and control measures.
View Article and Find Full Text PDFAnn Work Expo Health
February 2018
Control banding (CB) has been widely recommended for the selection of exposure controls for engineered nanomaterials (ENMs) in the absence of ENM-specific occupational exposure limits (OELs). Several ENM-specific CB strategies have been developed but have not been systematically evaluated. In this article, we identify the data inputs and compare the guidance provided by eight CB tools, evaluated on six ENMs, and assuming a constant handling/use scenario.
View Article and Find Full Text PDFThis site study was conducted in a chemical laboratory to evaluate nanomaterial emissions from 20-30 nm diameter bundles of single-walled carbon nanotubes (CNTs) during product development activities. Direct-reading instruments were used to monitor the tasks in real time and airborne particles were collected using various methods to characterize released nanomaterials using electron microscopy and elemental carbon (EC) analyses. CNT clusters and a few high aspect ratio particles were identified as being released from some activities.
View Article and Find Full Text PDFObjective: Toxicology studies suggest that exposure to certain types of engineered nanomaterials (ENMs) may cause adverse health effects, but little is known about the workforce in the United States that produces or uses these materials. In addition, occupational exposure control strategies in this industry are not well characterized. This study identified U.
View Article and Find Full Text PDFMMWR Morb Mortal Wkly Rep
September 2017
In July 2015, a municipal health department in Ohio received complaints of respiratory and ocular symptoms from patrons of an indoor waterpark resort. In response, the health department conducted an online survey in August 2015 through which 19 (68%) patron and employee respondents reported eye burning, nose irritation, difficulty breathing, and vomiting. On August 11, 2015, the health department requested a health hazard evaluation by CDC's National Institute for Occupational Safety and Health to characterize the prevalence of symptoms among employees and determine the etiology of work-related symptoms.
View Article and Find Full Text PDFThe evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These controls assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems.
View Article and Find Full Text PDFObjective: To evaluate the mortality experience among 3,199 workers employed 1951-1976 at a phosphate fertilizer production plant in central Florida with follow-up through 2011.
Methods: Cause-specific standardized mortality ratios (SMRs) for the full cohort were calculated with the U.S.
The most commonly reported control used to minimize workplace exposures to nanomaterials is the chemical fume hood. Studies have shown, however, that significant releases of nanoparticles can occur when materials are handled inside fume hoods. This study evaluated the performance of a new commercially available nano fume hood using three different test protocols.
View Article and Find Full Text PDFBecause nanomaterials are thought to be more biologically active than their larger parent compounds, careful control of exposures to nanomaterials is recommended. Field studies were conducted at three sites to develop information about the effectiveness of control measures including process changes, a downflow room, a ventilated enclosure, and an enclosed reactor. Aerosol mass and number concentrations were measured during specific operations with a photometer and an electrical mobility particle sizer to provide concentration measurements across a broad range of sizes (from 5.
View Article and Find Full Text PDFAlthough the relationship between an individual's racist attitudes and discriminatory behaviours has been widely studied, the association between racist attitudes among perpetrators and experiences of racism among targets has been under-examined. Based on data from the 2001-8 Australian Challenging Racism Project survey, this paper details a novel method to investigate the link between racist attitudes and experiences of discrimination utilising two separate models linked by nomination of cultural or ethnic groups who do not fit into Australian society (i.e.
View Article and Find Full Text PDFExposures to diacetyl, a primary ingredient of butter flavoring, have been shown to cause respiratory disease among workers who mix flavorings. This study focused on evaluating ventilation controls designed to reduce emissions from the flavor mixing tanks, the major source of diacetyl in the plants. Five exhaust hood configurations were evaluated in the laboratory: standard hinged lid-opened, standard hinged lid-closed, hinged lid-slotted, dome with 38-mm gap, and dome with 114-mm gap.
View Article and Find Full Text PDFInvestigations of carbon monoxide (CO-related poisonings and deaths on houseboats were conducted by the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. These investigations measured hazardous CO concentrations on and around houseboats that utilize gasoline-powered generators. Engineering control devices were developed and tested to mitigate this deadly hazard.
View Article and Find Full Text PDFThis study investigated occupational exposure to wood and vegetative smoke in a group of 28 forest firefighters at prescribed forest burns in a southeastern U.S. forest during the winters of 2003-2005.
View Article and Find Full Text PDFInflammation results in heightened mitochondrial ceramide levels, which cause electron transport chain dysfunction, elevates reactive oxygen species, and increases apoptosis. As mitochondria in aged hearts also display many of these characteristics, we hypothesized that mitochondrial decay stems partly from an age-related ceramidosis that heretofore has not been recognized for the heart. Intact mitochondria or their purified inner membranes (IMM) were isolated from young (4-6 mo) and old (26-28 mo) rats and analyzed for ceramides by LC-MS/MS.
View Article and Find Full Text PDF