Angew Chem Int Ed Engl
October 2020
Bifunctional catalysis in zeolites possessing both Brønsted and Lewis acid sites offers unique opportunities to tailor shape selectivity and enhance catalyst performance. Here, we examine the impact of framework and extra-framework gallium species on enriched aromatics production in zeolite ZSM-5. We compare three distinct methods of preparing Ga-ZSM-5 and reveal direct (single step) synthesis leads to optimal catalysts compared to post-synthesis methods.
View Article and Find Full Text PDFIn this perspective, the development of single-source precursors and their relative advantages over multiple source approaches for the synthesis of metal pnictide solid state materials is explored. Particular efforts in the selective production of iron phosphide materials for catalytic applications are discussed, especially directed towards the hydrogen evolution and oxygen evolution reactions of water splitting.
View Article and Find Full Text PDFA variety of catalysts have recently been developed for electrocatalytic oxygen evolution, but very few of them can be readily integrated with semiconducting light absorbers for photoelectrochemical or photocatalytic water splitting. Here, we demonstrate an efficient core/shell photoanode with a highly active oxygen evolution electrocatalyst shell (FeMnP) and semiconductor core (rutile TiO) for photoelectrochemical oxygen evolution reaction. Metal-organic chemical vapor deposition from a single-source precursor was used to ensure good contact between the FeMnP and the TiO.
View Article and Find Full Text PDFThe first heterobimetallic phosphide thin film containing iron, manganese, and phosphorus, derived from the single-source precursor FeMn(CO) (μ-PH ), has been prepared using a home-built metal-organic chemical vapor deposition apparatus. The thin film contains the same ratio of iron, manganese, and phosphorus as the initial precursor. The film becomes oxidized when deposited on a quartz substrate, whereas the film deposited on an alumina substrate provides a more homogeneous product.
View Article and Find Full Text PDFCarbon nanotubes (CNTs) have been used for a plethora of biomedical applications, including their use as delivery vehicles for drugs, imaging agents, proteins, DNA, and other materials. Here, we describe the synthesis and characterization of a new CNT-based contrast agent (CA) for X-ray computed tomography (CT) imaging. The CA is a hybrid material derived from ultrashort single-walled carbon nanotubes (20-80 nm long, US-tubes) and Bi(III) oxo-salicylate clusters with four Bi(III) ions per cluster (BiC).
View Article and Find Full Text PDFSix new anionic bismuth-oxido clusters containing trifluoroacetate ligands were prepared. These include two new BiO clusters: [M(NCMe)(HO)][Bi(μ-O)(μ-OH)(CFCO)] with an octahedral BiO(OH) core (M = Ni, 1a; Co, 1b) and four BiO clusters, {[Co(NCMe)][Bi(μ-O)(CFCO)]} (2a), {[Co{HC(MeCO)(MeCNH)}][Bi(μ-O)(CFCO)]·2[CFCO]·2[CFCOH]·2[HO]} (2b), {[Cu(NCMe)][Bi(μ-O)(CFCO)]·2[CFCOH]} (2c), and {[MeN][Bi(μ-O)(CFCO)]·2[CFCOH]} (2d). These are among the first bismuth-oxido anionic clusters synthesized, and the first to have transition metal countercations.
View Article and Find Full Text PDFA series of clusters of the form [Et4N][Fe2(CO)6(μ3-As)}(μ3-EFe(CO)4)], where E is either P or As, were synthesized from [Et4N]2[HAs{Fe(CO)4}3] and ECl3. AsCl3 gives the As-only compound; PCl3 produces compounds having two As atoms with one P atom, or one As atom and two P atoms, and they can exist as two possible isomers, one of which is chiral. The As2P and AsP2 clusters cocrystallize, and their structure as determined by single-crystal X-ray diffraction is given along with the structure of the As-only cluster.
View Article and Find Full Text PDFWe demonstrate the facile synthesis of high purity aluminum nanocrystals over a range of controlled sizes from 70 to 220 nm diameter with size control achieved through a simple modification of solvent ratios in the reaction solution. The monodisperse, icosahedral, and trigonal bipyramidal nanocrystals are air-stable for weeks, due to the formation of a 2-4 nm thick passivating oxide layer on their surfaces. We show that the nanocrystals support size-dependent ultraviolet and visible plasmon modes, providing a far more sustainable alternative to gold and silver nanoparticles currently in widespread use.
View Article and Find Full Text PDFReaction of BiPh3 with salicylic acid (HO-2-C6H4CO2H, H2Sal) at room temperature in wet acetonitrile or nitromethane leads to the facile formation of an oxo cluster compound with formula [Bi4(μ3-O)2(HSal)8] solvated by either MeCN and MeNO2 (1·2MeCN or 1·2MeNO2). This simple procedure affords a convenient, high yield (>80%) synthesis of a single bismuth oxo cluster. Both adducts exhibit a nearly planar Bi4(μ3-O)2 core.
View Article and Find Full Text PDFThe title complexes, hexaaquacobalt(II) bis(μ-pyridine-2,6-dicarboxylato)bis[(pyridine-2,6-dicarboxylato)bismuthate(III)] dihydrate, [Co(H(2)O)(6)][Bi(2)(C(7)H(4)NO(4))(4)]·2H(2)O, (I), and hexaaquanickel(II) bis(μ-pyridine-2,6-dicarboxylato)bis[(pyridine-2,6-dicarboxylato)bismuthate(III)] dihydrate, [Ni(H(2)O)(6)][Bi(2)(C(7)H(4)NO(4))(4)]·2H(2)O, (II), are isomorphous and crystallize in the triclinic space group P-1. The transition metal ions are located on the inversion centre and adopt slightly distorted MO(6) (M = Co or Ni) octahedral geometries. Two [Bi(pydc)(2)](-) units (pydc is pyridine-2,6-dicarboxylate) are linked via bridging carboxylate groups into centrosymmetric [Bi(2)(pydc)(4)](2-) dianions.
View Article and Find Full Text PDFActa Crystallogr Sect E Struct Rep Online
November 2010
The title organometallic complex, [Bi(C(6)H(5))(C(6)H(4)NO(3))(2)(C(3)H(7)NO)], features a Bi(III) atom in a distorted pentagonal-pyramidal coordination by two N,O-donating bidentate 3-hy-droxy-picolinate (3-hpic) ligands, one monodentate dimethyl-formamide (dmf) mol-ecule and one phenyl ring. The C atom of the aryl ligand occupies the apical position of the BiCN(2)O(3) coordination polyhedron, while the equatorial plane is formed by one O atom of the dmf ligand and two sets of N and O atoms from the chelating 3-hpic ligands. Inter-molecular secondary Bi⋯O [3.
View Article and Find Full Text PDFHeterometallic bismuth-niobium or -tantalum salicylate complexes react with sodium tetraphenylborate to produce complexes in which one or more aryl groups have been transferred from boron to bismuth with the concomitant displacement of a eta(2)-salicylato ligand. When the previously reported Bi(2)Ta(2)(sal)(4)(Hsal)(4)(OEt)(4) (1) and BiTa(4)(mu-O)(4)(sal)(4)(Hsal)(3)(O(i)Pr)(4) (2) are treated with an alcoholic solution of NaBPh(4), the compounds [PhBi(Hsal)Ta(sal)(2)(OEt)(2) x EtOH](2) (3) and PhBiTa(4)(mu-O)(4)(Hsal)(2)(sal)(4)(OEt)(4) x CH(2)Cl(2) (4) are produced (sal = O(2)CC(6)H(4)-2-O(2-), Hsal = O(2)CC(6)H(4)-2-OH(-)). The core geometries of the heterometallic complexes are retained.
View Article and Find Full Text PDFNanoparticles composed of magnetic cores with continuous Au shell layers simultaneously possess both magnetic and plasmonic properties. Faceted and tetracubic nanocrystals consisting of wustite with magnetite-rich corners and edges retain magnetic properties when coated with a Au shell layer, with the composite nanostructures showing ferrimagnetic behavior. The plasmonic properties are profoundly influenced by the high dielectric constant of the mixed iron oxide nanocrystalline core.
View Article and Find Full Text PDFSingle-source molecular precursors were found to produce iron phosphide materials. In a surfactant system of trioctylamine and oleic acid, H2Fe3(CO)9PtBu reacted to form Fe4(CO)12(PtBu)2, which decomposed to give Fe2P nanorods and "bundles." Control of the morphology obtained was possible by varying the surfactant system; addition of increasing amounts of oleic acid resulted in crystal splitting, while the addition of microliter amounts of an alkane enhanced the crystal splitting to give sheaflike structures.
View Article and Find Full Text PDFAddition of phenoxathiin cation radical (PO*+) to acyclic alkenes in acetonitrile (MeCN) solution occurred stereospecifically to form bis(10-phenoxathiiniumyl)alkane adducts. Stereospecific trans addition is ascribed to the intermediacy of an episulfonium cation radical. The alkenes used were cis- and trans-2-butene, cis- and trans-2-pentene, cis- and trans-4-methyl-2-pentene, cis- and trans-4-octene, trans-3-hexene, trans-3-octene, trans-5-decene, cis-2-hexene, and cis-2-heptene.
View Article and Find Full Text PDF[structure: see text] Thianthrene cation radical tetrafluoroborate (Th*+ BF4(-)) added to the terminal alkynes 1-pentyne, 1-hexyne, 1-heptyne, 1-octyne, 1-nonyne, and 1-decyne to form trans-1,2-bis(5-thianthreniumyl)alkene tetrafluoroborates (1-6). Similarly, addition of phenoxathiin cation radical tetrafluoroborate (PO*+ BF4(-)) to the same alkynes gave 1,2-bis(10-phenoxathiiniumyl)alkene tetrafluoroborates (7-12). The trans configuration of two of the adducts (1 and 4) was shown with X-ray crystallography.
View Article and Find Full Text PDF[reaction: see text] Thianthrene cation radical tetrafluoroborate (Th*+ BF4-) added to 2-butyne, 3-hexyne, 4-octyne, and 5-decyne in MeCN to form trans bisadducts R(Th+)C=C(Th+)R, where R = Me, Et, Pr, Bu (7a-d). Phenoxathiin cation radical tetrafluoroborate (PO*+ BF4-) added similarly to the last three alkynes to form adducts R(PO+)C=C(PO+)R, 8b-d. Cyclic monoadducts were not found.
View Article and Find Full Text PDFA series of platinum(II) and (IV) monoadducts of the type [Pt(II)(DACH)LCl]NO3 and [Pt(IV)(DACH)trans-(X)2LCl]NO3 (where DACH=trans-1R,2R-diaminocyclohexane, L=adenine, guanine, hypoxanthine, cytosine, adenosine, guanosine, inosine, cytidine, 9-ethylguanine (9-EtGua), or 1-methylcytosine and X=hydroxo or acetato ligand) have been synthesized and characterized by elemental analysis and by 1H and 195Pt nuclear magnetic resonance (NMR) spectroscopy. The crystal structure of the model nucleobase complex [Pt(IV)(trans-1R,2R-diaminocyclohexane)trans-(acetate)2(9-EtGua)Cl]NO3.H2O was determined using a single crystal X-ray diffraction method.
View Article and Find Full Text PDFThe monoadducts (4a-d) of thianthrene cation radical perchlorate (1a) and isobutene, 2-methylbutene, 2-methyl-2-butene, and 2-methylpentene decompose spontaneously in acetonitrile (MeCN) solution, with the formation of thianthrene (Th). Decomposition of 4a (1,2-(5,10-thianthreniumdiyl)-2-methylpropane diperchlorate) and 4a', the corresponding dihexafluorophosphate, was studied in depth and extensively with (1)H and (13)C NMR spectroscopy. Decomposition of 4a was found to involve the solvent itself as well as water in the solvent, remaining from incomplete drying, and gave, apart from Th, successively, the perchlorate salts of 2,4,4-trimethyl-2-oxazoline (6) and 2-amino-2-methylpropyl acetate (7).
View Article and Find Full Text PDFThe reaction of a 1:2 mixture of bismuth(III) salicylate with titanium(IV) isopropoxide in refluxing toluene has been investigated and found to proceed with ligand exchange to produce the new heterobimetallic complexes BiTi(4)(sal)(6)(mu-O(i)Pr)(3)(O(i)Pr)(4) (1), Bi(4)Ti(4)(sal)(10)(mu-O(i)Pr)(4)(O(i)Pr)(4) (2), and Bi(8)Ti(8)(sal)(20)(mu-O(i)Pr)(8)(O(i)Pr)(8) (3). Complex 1 is the major product, while 2 and 3 were identified as minor products from the reaction. Compound 1 is produced pure and in high yield by employing stoichiometric amounts of reagents; its crystal structure consists of a [Ti(4)(sal)(6)(O(i)Pr)(7)](3)(-) ion capped by a Bi(3+) ion.
View Article and Find Full Text PDFBismuth(III) salicylate, [Bi(Hsal)(3)](n), reacts readily with the trivalent metal beta-diketonate compounds M(acac)(3) (acac = acetylacetonate; M = Al, V, Cr, Fe, Co) to produce trinuclear coordination complexes of the general formula Bi(2)(Hsal)(6).M(acac)(3) (M = Al, V, Cr, Fe, Co) in 60-90% yields. Spectroscopic and single crystal X-ray diffraction experiments indicate that these complexes possess an unusual asymmetric nested structure in both solution and solid state.
View Article and Find Full Text PDFThe ability of the transition metal complex M(salen)* (M = Ni, Cu) to form Lewis acid-base adducts with lead(II) salts has been explored. The new complexes Pb(Hsal)(2)(Cu(salen*))(2) (1), [Pb(NO(3))(Cu(salen*))(2)](NO(3)) (2), Pb(OAc)(2)(Cu(salen*)) (3), and [Pb(OAc)(Ni(salen*)(2)](OAc) (4) (Hsal = O(2)CC(6)H(4)-2-OH, salen* = bis(3-methoxy)salicylideneimine) have been synthesized and characterized spectroscopically and by single-crystal X-ray diffraction. The coordination environment of the lead in the heterobimetallic complex is sensitive both to the initial lead salt and to the transition metal salen* complex that is employed in the synthesis.
View Article and Find Full Text PDFPhenoxathiin cation radical perchlorate (PO.+ClO4(-)) added stereospecifically to cyclopentene, cyclohexene, cycloheptene, and 1,5-cyclooctadiene to give 1,2-bis(5-phenoxathiiniumyl)cycloalkane diperchlorates (4-7) in good yield. The diaxial configuration of the PO+ groups was confirmed with X-ray crystallography.
View Article and Find Full Text PDFReactions between triphenyl bismuth, salicylic acid, and niobium or tantalum ethoxide have been explored. Four new coordination complexes incorporating bismuth and the group 5 metals niobium or tantalum have been synthesized and characterized spectroscopically, by elemental analysis, and by single crystal X-ray diffraction. The new complexes are Bi(2)M(2)(mu-O)(sal)(4)(Hsal)(4)(OEt)(2) (1a, M = Nb; 1b, M = Ta) and BiM(4)(mu-O)(4)(sal)(4)(Hsal)(3)(O(i)Pr)(4) (sal = O(2)CC(6)H(4)-2-O, Hsal = O(2)CC(6)H(4)-2-OH) (2a, M = Nb; 2b, M = Ta).
View Article and Find Full Text PDF