Utilization of Bulk RNA Sequencing for the Evaluation of Keratin Nanomaterials as a Coating for Percutaneous Devices.

Despite advances in the design and protocols for maintaining the skin/device interface around percutaneous devices (PDs), no current strategy ensures the permanent attachment of peri-implant epithelial tissue to the device surface. Based on preliminary data, we hypothesized that PDs coated with keratin nanomaterials, resembling the fingernail-nailbed interface, could provide a biochemically mediated surface that enhances epidermal cell adhesion and differentiation. To test this hypothesis, 15 Yucatan miniature pigs were each implanted with six percutaneous titanium devices, comprising three porous and three smooth devices, both with and without keratin coatings (Kerateine [iKNT] and Keratose [gKOS]).

Transhumeral prosthesis use and disuse affects whole-body angular momentum.

Background: Individuals with transhumeral limb loss have an increased risk of falling, potentially resulting from altered upper-body kinematics during gait. The purpose of this study was to investigate whole-body angular momentum as a measure of movement control, to gain an understanding of how these upper-body kinematics contribute to dynamic balance.

Methods: Eight participants with transhumeral limb loss and eight able-bodied control participants completed three gait trials at self-selected speeds.

Roles of collagen cross-links and osteon collagen/lamellar morphotypes in equine third metacarpals in tension and compression tests.

Many bones experience bending, placing one side in net compression and the other in net tension. Because bone mechanical properties are relatively reduced in tension compared with compression, adaptations are needed to reduce fracture risk. Several toughening mechanisms exist in bone, yet little is known of the influences of secondary osteon collagen/lamellar 'morphotypes' and potential interplay with intermolecular collagen cross-links (CCLs) in prevalent/predominant tension- and compression-loaded regions.

Transhumeral prosthesis use affects upper body kinematics and kinetics.

Background: Transhumeral (TH) limb loss leads to loss of body mass and reduced shoulder range of motion. Despite most owning a prosthesis, prosthesis abandonment is common. The consequence of TH limb loss and prosthesis use and disuse during gait may be compensation in the upper body, contributing to back pain or injury.

Extended physiological proprioception is affected by transhumeral Socket-Suspended prosthesis use.

The objective of this study was to define targeted reaching performance without visual information for transhumeral (TH) prosthesis users, establishing baseline information about extended physiological proprioception (EPP) in this population. Subjects completed a seated proprioceptive targeting task under simultaneous motion capture, using their prosthesis and intact limb. Eight male subjects, median age of 58 years (range 29-77 years), were selected from an ongoing screening study to participate.

Strain-mode-specific mechanical testing and the interpretation of bone adaptation in the deer calcaneus.

The artiodactyl (deer and sheep) calcaneus is a model that helps in understanding how many bones achieve anatomical optimization and functional adaptation. We consider how the dorsal and plantar cortices of these bones are optimized in quasi-isolation (the conventional view) versus in the context of load sharing along the calcaneal shaft by "tension members" (the plantar ligament and superficial digital flexor tendon). This load-sharing concept replaces the conventional view, as we have argued in a recent publication that employs an advanced analytical model of habitual loading and fracture risk factors of the deer calcaneus.

Exploration of the synergistic role of cortical thickness asymmetry ("Trabecular Eccentricity" concept) in reducing fracture risk in the human femoral neck and a control bone (Artiodactyl Calcaneus).

The mechanobiology of the human femoral neck is a focus of research for many reasons including studies that aim to curb age-related bone loss that contributes to a near-exponential rate of hip fractures. Many believe that the femoral neck is often loaded in rather simple bending, which causes net tension stress in the upper (superior) femoral neck and net compression stress in its inferior aspect ("T/C paradigm"). This T/C loading regime lacks in vivo proof.

Testing Precision and Accuracy of an Upper Extremity Proprioceptive Targeting Task Assessment.

Objective: To develop and test an assessment measuring extended physiological proprioception (EPP). EPP is a learned skill that allows one to extend proprioception to an external tool, which is important for controlling prosthetic devices. The current study examines the ability of this assessment to measure EPP in a nonamputee population for translation into the affected population.

Clinical Basis for Creating an Osseointegrated Neural Interface.

As technology continues to improve within the neuroprosthetic landscape, there has been a paradigm shift in the approach to amputation and surgical implementation of haptic neural prosthesis for limb restoration. The Osseointegrated Neural Interface (ONI) is a proposed solution involving the transposition of terminal nerves into the medullary canal of long bones. This design combines concepts of neuroma formation and prevention with osseointegration to provide a stable environment for conduction of neural signals for sophisticated prosthetic control.

Finite Element Analysis of Transhumeral and Transtibial Percutaneous Osseointegrated Endoprosthesis Implantation.

Cadaveric mechanical testing of a percutaneous osseointegration docking system (PODS) for osseointegration (OI) prosthetic limb attachment revealed that translation of the exact system from the humerus to the tibia may not be suitable. The PODS, designed specifically for the humerus achieved 1.4-4.

Virtual implantation technique to estimate endoprosthetic contact of percutaneous osseointegrated devices in the tibia.

Percutaneous osseointegrated (OI) devices have an endoprosthesis attached to the residual bone of an amputated limb, then pass permanently through the skin to be connected to the distal prosthetic componentry outside of the body. Whether the bone-anchoring region of current OI endoprostheses are cylindrical, and/or conical, they require intimate bone-endoprosthesis contact to promote stabilizing bone attachment. However, removing too much cortical bone to achieve more contact leads to thinner and, subsequently, weaker cortical walls.

Replicating dynamic humerus motion using an industrial robot.

Transhumeral percutaneous osseointegrated prostheses provide upper-extremity amputees with increased range of motion, more natural movement patterns, and enhanced proprioception. However, direct skeletal attachment of the endoprosthesis elevates the risk of bone fracture, which could necessitate revision surgery or result in loss of the residual limb. Bone fracture loads are direction dependent, strain rate dependent, and load rate dependent.

Upper extremity prosthetic selection influences loading of transhumeral osseointegrated systems.

Percutaneous osseointegrated (OI) implants are increasingly viable as an alternative to socket suspension of prosthetic limbs. Upper extremity prostheses have also become more complex to better replicate hand and arm function and attempt to recreate pre-amputation functional levels. With more functionality comes heavier devices that put more stress on the bone-implant interface, which could be an issue for implant stability.

Cortical and medullary morphology of the tibia.

Bone resorption caused by stress shielding and insufficient bone-implant contact continues to be problematic for orthopedic endoprostheses that utilize osseointegration (OI) for skeletal fixation. Morphologic analyses have helped combat this issue by defining anatomic parameters to optimize endoprosthesis loading by maximizing bone-implant contact. These studies have not typically included diaphyseal medullary morphology, as this region is not pertinent to total joint replacement.

Estimated forces and moments experienced by osseointegrated endoprostheses for lower extremity amputees.

Background: Percutaneous osseointegrated (OI) docking of prosthetic limbs returns loading directly to the residual bone of individuals with amputations. Lower limb diaphyseal biomechanics have not been studied during the wide range of daily activities performed by individuals with lower extremity amputations; therefore, little is known about the loads experienced at the bone-endoprosthetic interface of a percutaneous OI device.

Research Question: Does residual limb length and/or gender influence loading magnitudes in the diaphysis of the femur or tibia during daily activities?

Methods: This observational study used motion capture data from 40 non-amputee volunteers performing nine activities ranging from low to high demand, to virtually simulate residual limbs of amputees.

Evaluation of soft-tissue response around laser microgrooved titanium percutaneous devices.

Percutaneous devices are prone to epidermal downgrowth and sinus tract formation, which can serve as a nidus for bacterial colonization and increase the risk of peri-prosthetic infection. A laser microgrooved topography has been shown to limit gingival epidermal downgrowth around dental implants. However, the efficacy of this laser microgrooved topography to limit epidermal downgrowth around nongingival percutaneous devices is yet to be investigated.

Initial stability of a percutaneous osseointegrated endoprosthesis with proximal interlocking screws for transhumeral amputees.

Background: Percutaneous osseointegrated devices for skeletal fixation of prosthetic limbs have the potential to improve clinical outcomes in the transhumeral amputee population. Initial endoprosthesis stability is paramount for long-term osseointegration and safe clinical introduction of this technology. We evaluated an endoprosthetic design featuring a distally porous coated titanium stem with proximal slots for placement of bicortical interlocking screws.

Restabilization of the Occipitocervical Junction After a Complete Unilateral Condylectomy: A Biomechanical Comparison of Unilateral and Bilateral Fixation Techniques.

Background: Occipitocervical instability may result from transcondylar resection of the occipital condyle. Initially, patients may be able to maintain a neutral alignment but severe occipitoatlantal subluxation may subsequently occur, with cranial settling, spinal cord kinking, and neurological injury.

Objective: To evaluate the ability of posterior fixation constructs to prevent progression to severe deformity after radical unilateral condylectomy.

Variation in bone response to the placement of percutaneous osseointegrated endoprostheses: A 24-month follow-up in sheep.

Percutaneous osseointegrated (OI) devices for amputees are metallic endoprostheses, that are surgically implanted into the residual stump bone and protrude through the skin, allowing attachment of an exoprosthetic limb. In contrast to standard socket suspension systems, these percutaneous OI devices provide superior attachment platforms for artificial limbs. However, bone adaptation, which includes atrophy and/or hypertrophy along the extent of the host bone-endoprosthetic interface, is seen clinically and depends upon where along the bone the device ultimately transfers loading forces to the skeletal system.

Biomimetic coatings and negative pressure wound therapy independently limit epithelial downgrowth around percutaneous devices.

Biomimetic material coatings and negative pressure wound therapy (NPWT) have been shown independently to limit the epithelial downgrowth rates in percutaneous devices. It was therefore hypothesized that these techniques, in combination, could further limit the clinically observed epithelial downgrowth around these devices. In this study, we evaluated the efficacy of two biomimetic coatings, collagen and hydroxyapatite (HA), to prevent downgrowth when used with continuous NPWT.

Epidermal growth factor receptor genes are overexpressed within the periprosthetic soft-tissue around percutaneous devices: A pilot study.

Epidermal downgrowth around percutaneous devices produce sinus tracts, which then accumulate bacteria becoming foci of infection. This mode to failure is epidermal-centric, and is accelerated by changes in the chemokines and cytokines of the underlying periprosthetic granulation tissue (GT). In order to more fully comprehend the mechanism of downgrowth, in this 28-day study, percutaneous devices were placed in 10 Zucker diabetic fatty rats; 5 animals were induced with diabetes mellitus II (DM II) prior to the surgery and 5 animals served as a healthy, nondiabetic cohort.

Characterization and evaluation of fluoridated apatites for the development of infection-free percutaneous devices.

The wound healing process in the soft tissues adjacent to percutaneous implants induces "epithelial downgrowth", and subsequently, a sinus tract around the device. This provides an optimal environment for bacterial colonization and proliferation. In an attempt to arrest downgrowth and achieve epithelial attachment to a device surface, we have sought to mimic the most common and successful percutaneous organ, the tooth.

Influence of negative pressure wound therapy on peri-prosthetic tissue vascularization and inflammation around porous titanium percutaneous devices.

Negative Pressure Wound Therapy (NPWT) has been shown to limit downgrowth around percutaneous devices in a guinea pig model. However, the influence of NPWT on peri-prosthetic tissue characteristics leading to limited downgrowth is still unclear. In order to investigate this, 12 CD hairless rats were assigned into two groups, NPWT and Untreated (n = 6/group).

The Circle-Fit Method Helps Make Reliable Cortical Thickness Measurements Regardless of Humeral Length.

Background: Although proximal humerus strength/quality can be assessed using cortical thickness measurements (eg, cortical index), there is no agreement where to make them. Tingart and coworkers used measurements where the proximal endosteum becomes parallel, while Mather and coworkers used measurements where the periosteum becomes parallel. The new circle-fit method (CFM) makes 2 metaphyseal (M1-M2) and 6 diaphyseal (D1-D6) measurements referenced from humeral head diameter (HHD).