The identification and quantification of tire and road wear particles in Osaka Bay, Japan, by two analytical methods.

Tire and road wear particles (TRWP) are generated at the frictional interface between tires and the road surface. This mixture of tire tread and road pavement materials can migrate from roads into nearby water bodies during precipitation events. The absence of mass-based measurements in marine environments introduces uncertainty in environmental risk assessments and fate and transport models.

Abundance and distribution of tire and road wear particles in the Seine River, France.

Tire and road wear particles (TRWP) are formed at the frictional interface between tires and the road surface. Tire tread and road pavement materials are denser than water but can be washed from the road surface into receiving water bodies, ultimately depositing into sediment, soil, or other media depending on the receiving environment. However, the paucity of mass-based measurements has limited the knowledge on the nature and extent of environmental concentrations necessary for environmental risk assessment of TRWP.

Refinement of a microfurnace pyrolysis-GC-MS method for quantification of tire and road wear particles (TRWP) in sediment and solid matrices.

Tire and road wear particles (TRWP) are produced by abrasion at the interface of the pavement and tread surface and contain tread rubber with road mineral encrustations. Quantitative thermoanalytical methods capable of estimating TRWP concentrations are needed to assess the prevalence and environmental fate of these particles. However, the presence of complex organic constituents in sediment and other environmental samples presents a challenge to the reliable determination of TRWP concentrations using current pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) methodologies.

Can oral toxicity data for PFAS inform on toxicity via inhalation?

Per- and poly-fluoroalkyl substances (PFAS) are ubiquitous in the environment and are detected in wildlife and humans. With respect to human exposure, studies have shown that ingestion is the primary route of exposure; however, in certain settings, exposure via inhalation could also be a significant source of exposure. While many studies examined toxicity of PFAS via ingestion, limited information is available for PFAS toxicity via the inhalation route, translating into a lack of exposure guidelines.

Assessment of ethanol exposure from hand sanitizer use and potential for developmental toxicity in nursing infants.

Ingestion of ethanol during pregnancy is known to have detrimental effects on the fetus. Although the potential developmental effects of maternal ethanol intake during lactation are less well characterized, public health guidelines recommend avoidance of alcohol or, if alcohol is consumed, to allow for 1-2 h to pass before nursing. A proposal to classify ethanol as potentially harmful to breast-fed children warrants an investigation of the potential adverse neurodevelopmental effects of low-dose ethanol exposure during lactation.

Chemical mapping of tire and road wear particles for single particle analysis.

Tire and road wear particles (TRWP), which are comprised of polymer-containing tread with pavement encrustations, are generated from friction between the tire and the road. Similar to environmentally dispersed microplastic particles (MP), the fate of TRWP depends on both the mass concentration as well as individual particle characteristics, such as particle diameter and density. The identification of an individual TRWP in environmental samples has been limited by inherent characteristics of black particles, which interfere with the spectroscopic techniques most often used in MP research.

Cobalt-containing dust exposures: Prediction of whole blood and tissue concentrations using a biokinetic model.

Biokinetic models estimating cobalt (Co) tissue burden can help assess the potential for systemic effects. Such models, however, have not been used to estimate remote tissue concentrations associated with inhalation exposure to Co-containing dust in general environments, work spaces, or animal toxicity tests. We have therefore updated a Co biokinetic model previously developed for oral dosing to include the inhalation pathway by incorporating the International Commission on Radiological Protection (ICRP) Human Respiratory Tract Model.

Evaluation of Personal Exposure to Surgical Smoke Generated from Electrocautery Instruments: A Pilot Study.

Hospital technician surgical smoke exposures during several types of electrocautery-based procedures were evaluated. Personal and area air sampling was performed for 106 individual analytes including ultrafine particulate matter (UFP), volatile organic compounds, polycyclic aromatic hydrocarbons, phenol, aldehydes, carbon monoxide, hydrogen sulfide, and hydrogen cyanide. Acetone, d-limonene, ethanol, ethyl acetate, and fluorene were measured in surgical suites at concentrations 1.

Potential Airborne Asbestos Exposure and Risk Associated with the Historical Use of Cosmetic Talcum Powder Products.

Over time, concerns have been raised regarding the potential for human exposure and risk from asbestos in cosmetic-talc-containing consumer products. In 1985, the U.S.

Understanding outcomes and toxicological aspects of second generation metal-on-metal hip implants: a state-of-the-art review.

Hip implants have improved the mobility and quality of life in millions of individuals. This review presents the evolution of scientific knowledge regarding the history and understanding of systemic and local metal toxicological concerns of hip implants designs utilizing metal-on-metal (MoM) bearing surfaces used in hip resurfacing arthroplasty (HRA) and total hip arthroplasty (THA). This analysis addresses: (1) the history of the development of MoM hip implants; (2) the clinical and toxicological rationale for introducing second-generation MoM implants in the early 2000s as an alternative to metal-on-polyethylene bearings; (3) the subsequent history regarding success and failure of second-generation MoM devices; (4) a detailed review of the history of MoM toxicology, including carcinogenic potential, metal blood levels, hypersensitivity, and release of wear particles; and (5) a review of local tissue effects and MoM patient management.

Methods for Sterilizing Clinically Relevant Wear Particles Isolated from Metal-on-Metal Hip Implants.

Engineered or incidental particles may contain endotoxin from contaminated environments associated with generation, production, or handling activities. Endotoxins are ubiquitous contaminants that may yield false positive responses in immunological assays if present. The purpose of this study was to develop a sterilization method for removal of endotoxin from clinically relevant wear particles isolated from metal-on-metal (MoM) hip implant lubricant.

Characterization of airborne BTEX exposures during use of lawnmowers and trimmers.

Few studies have evaluated airborne exposures to benzene, toluene, ethylbenzene, and xylenes (BTEX) during operation of two-stroke and four-stroke small engines, such as those in lawn maintenance equipment. Full-shift, 8-hour personal samples were collected during a simulation study to characterize yard maintenance activities including mowing, trimming, and fueling. Short-term, 15-minute personal samples were collected to separately evaluate mowing and trimming exposures.

An assessment of formaldehyde emissions from laminate flooring manufactured in China.

Formaldehyde emissions from two laminate flooring products, labeled as California Air Resources Board (CARB) compliant, were evaluated. Passive 24-hr samples (n = 79) and real-time measurements were collected following installation and removal of the products in two rooms of similar size. Mean formaldehyde concentrations following installation were 0.

Data on the histological and immune cell response in the popliteal lymph node in mice following exposure to metal particles and ions.

Hip implants containing cobalt-chromium (CoCr) have been used for over 80 years. In patients with metal-on-metal (MoM) hip implants, it has been suggested that wear debris particles may contribute to metal sensitization in some individuals, leading to adverse reactions. This article presents data from a study in which the popliteal lymph node assay (PLNA) was used to assess immune responses in mice treated with chromium-oxide (Cr2O3) particles, metal salts (CoCl2, CrCl3, and NiCl2) or Cr2O3 particles with metal salts ("A preliminary evaluation of immune stimulation following exposure to metal particles and ions using the mouse popliteal lymph node assay" (B.

A preliminary evaluation of immune stimulation following exposure to metal particles and ions using the mouse popliteal lymph node assay.

The objective of this preliminary study was to evaluate the threshold for immune stimulation in mice following local exposure to metal particles and ions representative of normal-functioning cobalt-chromium (CoCr) metal-on-metal (MoM) hip implants. The popliteal lymph node assay (PLNA) was used in this study to assess immune responses in BALB/c mice following treatment with chromium-oxide (Cr2O3) particles, metal salts (CoCl2, CrCl3 and NiCl2), or Cr2O3 particles together with metal salts using single-dose exposures representing approximately 10days (0.000114mg), 19years (0.

Experimental methodology for assessing the environmental fate of organic chemicals in polymer matrices using column leaching studies and OECD 308 water/sediment systems: Application to tire and road wear particles.

Automobile tires require functional rubber additives including curing agents and antioxidants, which are potentially environmentally available from tire and road wear particles (TRWP) deposited in soil and sediment. A novel methodology was employed to evaluate the environmental fate of three commonly-used tire chemicals (N-cyclohexylbenzothiazole-2-sulfenamide (CBS), N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine (6-PPD) and 1,3-diphenylguanidine (DPG)), using a road simulator, an artificial weathering chamber, column leaching tests, and OECD 308 sediment/water incubator studies. Environmental release factors were quantified for curing (f(C)), tire wear (f(W)), terrestrial weathering (f(S)), leaching from TRWP (f(L)), and environmental availability from TRWP (f(A)) by liquid chromatography-tandem mass spectroscopy (LC/MS/MS) analyses.

Review of cobalt toxicokinetics following oral dosing: Implications for health risk assessments and metal-on-metal hip implant patients.

Cobalt (Co) can stimulate erythropoietin production in individuals at doses exceeding 25 mg CoCl2/day. Co has also been shown to exert effects on the thyroid gland, heart and nervous system at sufficient doses. The biological activity of Co is dictated by the concentration of free (unbound) ionic Co(2+).

Refined biokinetic model for humans exposed to cobalt dietary supplements and other sources of systemic cobalt exposure.

An updated biokinetic model for human exposures to cobalt (Co) was developed based on a comprehensive set of human pharmacokinetics data collected from five male and five female volunteers who ingested ∼1 mg Co/day of a Co supplement for 3 months. Three key experimental observations from the human dosing studies were incorporated into the model: (1) an increase in the measured fraction of large molecular serum protein bound Co from 95% during dosing to 99% after dosing; (2) a linear decrease in Co red blood cell concentration after dosing; and (3) Co renal clearance consistent with estimated glomerular filtration rates and free Co²⁺ concentration. The model was refined by adding compartments accounting for (1) albumin bound Co in intravascular fluid (serum); (2) albumin bound Co in extravascular fluid with physiologic exchange rates of albumin bound Co between extravascular and intravascular fluid; and (3) a novel sequential cascade of compartments representing red blood cell ages between 1 and 120 days.

Effects and blood concentrations of cobalt after ingestion of 1 mg/d by human volunteers for 90 d.

Background: Over-the-counter cobalt supplements are available for sale in the United States, but little is known regarding their clinical effects and biokinetic distribution with long-term use.

Objective: We assessed blood kinetics, biochemical responses, and clinical effects in 5 adult men and 5 adult women who voluntarily ingested ∼ 1.0 mg Co/d (0.

31-day study of cobalt(II) chloride ingestion in humans: pharmacokinetics and clinical effects.

The United Kingdom Expert Group on Vitamins and Minerals concluded that ingesting cobalt (Co)-containing supplements up to 1400 μg Co/d is unlikely to produce adverse health effects. However, the associated blood Co concentrations and safety of Co-containing dietary supplements have not been fully characterized. Thus, blood Co kinetics and a toxicological assessment of hematological and biochemical parameters were evaluated following Co dietary supplementation in 5 male and 5 female volunteers who ingested approximately 1000 μg Co/d (10-19 μg Co/kg-d) as cobalt(II) chloride for a period of 31 d.

A review of the health hazards posed by cobalt.

Cobalt (Co) is an essential element with ubiquitous dietary exposure and possible incremental exposure due to dietary supplements, occupation and medical devices. Adverse health effects, such as cardiomyopathy and vision or hearing impairment, were reported at peak blood Co concentrations typically over 700 µg/L (8-40 weeks), while reversible hypothyroidism and polycythemia were reported in humans at ~300 µg/L and higher (≥2 weeks). Lung cancer risks associated with certain inhalation exposures have not been observed following Co ingestion and Co alloy implants.