Analysis of the palladium-catalyzed (aromatic)C-H bond metalation-deprotonation mechanism spanning the entire spectrum of arenes.

A comprehensive understanding of the C-H bond cleavage step by the concerted metalation-deprotonation (CMD) pathway is important in further development of cross-coupling reactions using different catalysts. Distortion-interaction analysis of the C-H bond cleavage over a wide range of (hetero)aromatics has been performed in an attempt to quantify the various contributions to the CMD transition state (TS). The (hetero)aromatics evaluated were divided in different categories to allow an easier understanding of their reactivity and to quantify activation characteristics of different arene substituents.

Rhodium(III)-catalyzed heterocycle synthesis using an internal oxidant: improved reactivity and mechanistic studies.

Directing groups that can act as internal oxidants have recently been shown to be beneficial in metal-catalyzed heterocycle syntheses that undergo C-H functionalization. Pursuant to the rhodium(III)-catalyzed redox-neutral isoquinolone synthesis that we recently reported, we present in this article the development of a more reactive internal oxidant/directing group that can promote the formation of a wide variety of isoquinolones at room temperature while employing low catalyst loadings (0.5 mol %).

Rhodium(III)-catalyzed arene and alkene C-H bond functionalization leading to indoles and pyrroles.

Recently, the rhodium(III)-complex [Cp*RhCl(2)](2) 1 has provided exciting opportunities for the efficient synthesis of aromatic heterocycles based on a rhodium-catalyzed C-H bond functionalization event. In the present report, the use of complexes 1 and its dicationic analogue [Cp*Rh(MeCN)(3)][SbF(6)](2) 2 have been employed in the formation of indoles via the oxidative annulation of acetanilides with internal alkynes. The optimized reaction conditions allow for molecular oxygen to be used as the terminal oxidant in this process, and the reaction may be carried out under mild temperatures (60 °C).

Predictable and site-selective functionalization of poly(hetero)arene compounds by palladium catalysis.

The challenge of achieving selective and predictable functionalizations at C-H bonds with complex poly(hetero)aromatic substrates was addressed by two different approaches. Site-selectivity can be obtained by applying various reaction conditions that are (hetero)arene specific to substrates that contain indoles, pyridine N-oxide, and polyfluorinated benzenes. An experimental classification of electron-rich heteroarenes based on their reactivity toward palladium-catalyzed C-H functionalization was established, the result of which correlated well with the order of reactivity predicted by the DFT-calculated concerted metalation-deprotonation (CMD) pathway.

Mechanistic analysis of azine N-oxide direct arylation: evidence for a critical role of acetate in the Pd(OAc)2 precatalyst.

Detailed mechanistic studies on the palladium-catalyzed direct arylation of pyridine N-oxides are presented. The order of each reaction component is determined to provide a general mechanistic picture. The C-H bond cleaving step is examined in further detail through computational studies, and the calculated results are in support of an inner-sphere concerted metalation-deprotonation (CMD) pathway.

Intramolecular palladium-catalyzed alkane C-H arylation from aryl chlorides.

The first examples of efficient and general palladium-catalyzed intramolecular C(sp(3))-H arylation of (hetero)aryl chlorides, giving rise to a variety of valuable cyclobutarenes, indanes, indolines, dihydrobenzofurans, and indanones, are described. The use of aryl and heteroaryl chlorides significantly improves the scope of C(sp(3))-H arylation by facilitating the preparation of reaction substrates. Careful optimization studies have shown that the palladium ligand and the base/solvent combination are crucial to obtaining the desired class of product in high yields.

Investigation of the mechanism of C(sp3)-H bond cleavage in Pd(0)-catalyzed intramolecular alkane arylation adjacent to amides and sulfonamides.

The reactivity of C(sp(3))-H bonds adjacent to a nitrogen atom can be tuned to allow intramolecular alkane arylation under Pd(0) catalysis. Diminishing the Lewis basicity of the nitrogen lone pair is crucial for this catalytic activity. A range of N-methylamides and sulfonamides react exclusively at primary C(sp(3))-H bonds to afford the products of alkane arylation in good yields.

Decarboxylative ketone aldol reactions: development and mechanistic evaluation under metal-free conditions.

Malonic acid half thioesters (MAHTs) and malonic acid half oxyesters (MAHOs) are shown to undergo decarboxylative nucleophilic addition reactions with ketone and aldehyde electrophiles in the presence of stoichiometric or catalytic quantities of triethylamine at room temperature. The ability to perform these reactions under metal-free conditions has enabled a detailed mechanistic analysis of the reaction pathway leading to the (1)H NMR spectroscopic characterization of a postnucleophilic addition/predecarboxylation intermediate and experimental evidence for a reversible formation of this intermediate followed by an irreversible decarboxylation. Rate constants for each of the bond forming/bond breaking steps in the reaction pathway were also determined, casting light on the differing reactivity between MAHO and MAHT nucleophiles in these processes.

Rhodium(III)-catalyzed intermolecular hydroarylation of alkynes.

The rhodium(III)-catalyzed hydroarylation of internal alkynes is described. Good yields are obtained for a variety of alkynes, and excellent regioselectivity is observed for unsymmetrically substituted alkynes. The reaction also gives good yields for a range of arenes.

Rhodium(III)-catalyzed isoquinolone synthesis: the N-O bond as a handle for C-N bond formation and catalyst turnover.

An external-oxidant-free process to access the isoquinolone motif via cross-coupling/cyclization of benzhydroxamic acid with alkynes is described. The reaction features a regioselective cleavage of a C-H bond on the benzhydroxamic acid coupling partner as well as a regioselective alkyne insertion. Mechanistic studies point out the important involvement of a N-O bond as a tool for C-N bond formation and catalyst turnover.

Room-temperature direct arylation of polyfluorinated arenes under biphasic conditions.

New biphasic conditions for the palladium-catalyzed direct arylation of electron-poor fluorinated arenes have been developed. Taking advantage of biphasic chemistry, the use of an immiscible mixture of water and an organic solvent allows complete solubilization of all components of the system, enabling the reaction to proceed at room temperature in yields up to 99%.

Modulating reactivity and diverting selectivity in palladium-catalyzed heteroaromatic direct arylation through the use of a chloride activating/blocking group.

Through the introduction of an aryl chloride substituent, the selectivity of palladium-catalyzed direct arylation may be diverted to provide alternative regioisomeric products in high yields. In cases where low reactivity is typically observed, the presence of the carbon-chlorine bond can serve to enhance reactivity and provide superior outcomes. From a strategic perspective, the C-Cl bond is easily introduced and can be employed in a variety of subsequent transformations to provide a wealth of highly functionalized heterocycles with minimal substrate preactivation.

Mechanistic considerations in the development and use of azine, diazine and azole N-oxides in palladium-catalyzed direct arylation.

Azines, diazines or thiazole N-oxides are highly reactive substrates in palladium-catalyzed direct arylation reaction. For these reactions, the results are inconsistent with an SEAr reaction pathway and may best fit with a concerted metalation-deprotonation-like (CMD) mechanism.

Domino palladium-catalyzed Heck-intermolecular direct arylation reactions.

A domino palladium-catalyzed Heck-intermolecular direct arylation reaction has been developed, giving access to a variety of dihydrobenzofurans, indolines, and oxindoles. A variety of sulfur-containing heterocycles such as thiazoles, thiophenes, and benzothiophene can be employed as the direct arylation coupling partner in yields up to 99%.

Isoquinoline synthesis via rhodium-catalyzed oxidative cross-coupling/cyclization of aryl aldimines and alkynes.

A general rhodium-catalyzed oxidative coupling reaction between internal alkynes and aryl aldimines is described. This process affords 3,4-disubstituted isoquinolines in good yield and high regioselectivity. Preliminary mechanistic studies suggest that the C-N bond formation arises from the reductive elimination of a rhodium(III) species.

Palladium-catalyzed benzylation of heterocyclic aromatic compounds.

Broadly applicable palladium-catalyzed heteroarene benzylation reactions are described with a focus on the most challenging heterocyclic classes under traditional benzylation techniques such as sulfur-containing heterocycles and those bearing functional groups that would be incompatible with reactions requiring Lewis acids and/or strong bases.

Site-selective azaindole arylation at the azine and azole rings via N-oxide activation.

Subjection of N-methyl 6- and 7-azaindole N-oxides to a Pd(OAc)2/DavePhos catalyst system enables regioselective direct arylation of the azine ring. Following deoxygenation, 7-azaindole substrates undergo an additional regioselective azole direct arylation event in good yield.

Palladium-catalyzed direct arylation of azine and azole N-oxides: reaction development, scope and applications in synthesis.

Palladium-catalyzed direct arylation reactions are described with a broad range of azine and azole N-oxides. In addition to aspects of functional group compatibility, issues of regioselectivity have been explored when nonsymmetrical azine N-oxides are used. In these cases, both the choice of ligand and the nature of the azine substituents play important roles in determining the regioisomeric distribution.

Establishment of broadly applicable reaction conditions for the palladium-catalyzed direct arylation of heteroatom-containing aromatic compounds.

Conditions for the palladium-catalyzed direct arylation of a wide range of heterocycles with aryl bromides are reported. Those conditions employ a stoichiometric ratio of both coupling partners, as well as a substoichiometric quantity of pivalic acid, which results in significantly faster reactions. An evaluation of the influence of the nature of the aryl halide has also been carried out.

Ruthenium-catalyzed dehydrogenation of ammonia boranes.

The dehydrogenation of ammonia borane (AB) and methylammonia borane (MeAB) is shown to be catalyzed by several Ru-amido complexes. Up to 1 equiv of H2 (1.0 system wt %) is released from AB by as little as 0.

Palladium-catalyzed direct arylation of nitro-substituted aromatics with aryl halides.

Direct arylation reactions of nitrobenzenes and aryl halides occur in good yield and high ortho regioselectivity. These reactions can be performed on gram scale with as few as 3 equiv of the nitro arene relative to the aryl halide. The synthetic utility of this method is demonstrated via rapid synthesis of a Boscalid intermediate.

Analysis of the concerted metalation-deprotonation mechanism in palladium-catalyzed direct arylation across a broad range of aromatic substrates.

The concerted metalation-deprotonation mechanism predicts relative reactivity and regioselectivity for a diverse set of arenes spanning the entire spectrum of known palladium-catalyzed direct arylation coupling partners. An analysis following an active strain model provides a more complete portrayal of the important arene/catalyst parameters leading to a successful coupling. The breadth of arenes whose reactivity can be predicted by the CMD mechanism indicates that it may be far more widespread than previously imagined.