In-situ analysis of sub-nanomolar level of Fe(II) in open-ocean waters.

Iron (Fe) in seawater is an essential micronutrient for marine phytoplankton, and Fe deficiency limits their growth in high-nutrient, low-chlorophyll areas. The bioavailability of Fe for phytoplankton largely depends on its chemical speciation in seawater. In surface water, the reduction of Fe(III) to Fe(II) is an important step in the uptake of Fe by phytoplankton.

Deep-sea in situ determination of sulfide using a sensitized chemiluminescent terbium complex.

A new chemiluminescence (CL) method based on the chemiluminescent reaction between sulfide and an acidic permanganate solution was used to quantify sulfide in seawater. A terbium-pipemidic acid complex was used as CL enhancer. The method was used to determine sulfide in the concentration range of 1-30 μmol/L in artificial seawater samples.

Adenosine Triphosphate Measurement in Deep Sea Using a Microfluidic Device.

Total ATP (adenosine triphosphate) concentration is a useful biochemical parameter for detecting microbial biomass or biogeochemical activity anomalies in the natural environment. In this study, we describe the development and evaluation of a new version of in situ ATP analyzer improved for the continuous and quantitative determination of ATP in submarine environments. We integrated a transparent microfluidic device containing a microchannel for cell lysis and a channel for the bioluminescence L⁻L (luciferin⁻luciferase) assay with a miniature pumping unit and a photometry module for the measurement of the bioluminescence intensity.

from the Subseafloor Sedimentary Biosphere Disperse to the Hydrosphere through Submarine Mud Volcanoes.

Submarine mud volcanoes (SMVs) are formed by muddy sediments and breccias extruded to the seafloor from a source in the deep subseafloor and are characterized by the discharge of methane and other hydrocarbon gasses and deep-sourced fluids into the overlying seawater. Although SMVs act as a natural pipeline connecting the Earth's surface and subsurface biospheres, the dispersal of deep-biosphere microorganisms and their ecological roles remain largely unknown. In this study, we investigated the microbial communities in sediment and overlying seawater at two SMVs located on the Ryukyu Trench off Tanegashima Island, southern Japan.

Colorimetric pH Measurement of Pressurized Groundwater Containing CO2.

A gas-tight pH measurement is needed to monitor water chemistry at a CO2 geological storage site. In the CO2 reservoirs, the temperature and pressure are generally more than the critical point of CO2 (31.2°C and 7.

Effect of sulfide, osmotic, and thermal stresses on taurine transporter mRNA levels in the gills of the hydrothermal vent-specific mussel Bathymodiolus septemdierum.

Hydrothermal vent environmental conditions are characterized by high sulfide concentrations, fluctuating osmolality, and irregular temperature elevations caused by vent effluents. These parameters represent potential stressors for organisms that inhabit the area around hydrothermal vents. Here, we aimed to obtain a better understanding of the adaptation mechanisms of marine species to hydrothermal vent environments.

Evaluation of the Effect on Temperature Conversion of pHT at 25°C in the Temperature Range 0 - 40°C Due to Incorrect Estimations of Salinity, Alkalinity, and Phosphate and Silicate Concentrations.

Under conditions where carbonate and oceanic parameters such as alkalinity (A(T)), salinity (Sp), and phosphate (P(T)) and silicate (SiT) concentrations cannot be obtained, the use of fixed values to calculate total pH (pHT) at 25°C was demonstrated. For temperatures of 20 - 30°C, these values caused a maximum error of ±0.001 in pHT.

Dilute nitric or nitrous acid solution containing halide ions as effective media for pure gold dissolution.

The greatly enhanced oxidation ability of dilute aqueous nitric acid (0.10-2.0 mol L(-1)) containing bromide and iodide salts as well as chloride salts has been examined based on the dissolution kinetics of pure gold at 30-60 °C.

Colorimetric pH measurement for seawater samples using a three light-emitting diodes detector and a calibration method for temperature dependence.

A colorimetric pH measurement of seawater samples using a light source comprising a three light-emitting diodes (TLED) detector and meta-cresol purple (mCP) as an indicator was investigated. The molar absorption ratios (e1, e2, and e3/e2) for mCP using the TLED detector at 25°C were determined to be 0, 1.9994, and 0.

Effects of acidic functional groups on dielectric properties of sodium alginates and carrageenans in water.

This study investigated the dielectric properties of sodium alginates and carrageenans in water at frequencies between 100 MHz and 20 GHz in regard to water-hydrocolloid interactions via acidic functional groups. Both sodium alginates and carrageenans showed conduction loss at lower frequencies and dielectric loss at higher frequencies. Reduction and desulfation of sodium alginates and carrageenans, which decreased the numbers of acidic functional groups, decreased their conduction loss.

Characteristics of microbial communities in crustal fluids in a deep-sea hydrothermal field of the suiyo seamount.

To directly access the sub-seafloor microbial communities, seafloor drilling has been done in a deep-sea hydrothermal field of the Suiyo Seamount, Izu-Bonin Arc, Western Pacific. In the present study, crustal fluids were collected from the boreholes, and the bacterial and archaeal communities in the fluids were investigated by culture-independent molecular analysis based on 16S rRNA gene sequences. Bottom seawater, sands, rocks, sulfide mound, and chimneys were also collected around the boreholes and analyzed for comparisons.

Fast measurement of dissolved inorganic carbon concentration for small-volume interstitial water by acid extraction and nondispersive infrared gas analysis.

We developed a system for measuring the total dissolved inorganic carbon (DIC) concentrations in interstitial water and hydrothermal fluid, which are hard to obtain in large volumes. The system requires a sample volume of only 500 μL, and it takes only 150 s per one sample. The detection limit of this system was estimated to be 66.

Discovery of new hydrothermal activity and chemosynthetic fauna on the Central Indian Ridge at 18°-20° S.

Indian Ocean hydrothermal vents are believed to represent a novel biogeographic province, and are host to many novel genera and families of animals, potentially indigenous to Indian Ocean hydrothermal systems. In particular, since its discovery in 2001, much attention has been paid to a so-called 'scaly-foot' gastropod because of its unique iron-sulfide-coated dermal sclerites and the chemosynthetic symbioses in its various tissues. Despite increasing interest in the faunal assemblages at Indian Ocean hydrothermal vents, only two hydrothermal vent fields have been investigated in the Indian Ocean.

Disturbance of deep-sea environments induced by the M9.0 Tohoku Earthquake.

The impacts of the M9.0 Tohoku Earthquake on deep-sea environment were investigated 36 and 98 days after the event. The light transmission anomaly in the deep-sea water after 36 days became atypically greater (∼35%) and more extensive (thickness ∼1500 m) near the trench axis owing to the turbulent diffusion of fresh seafloor sediment, coordinated with potential seafloor displacement.

Determination of sulfide with acidic permanganate chemiluminescence for development of deep-sea in-situ analyzers.

A new chemiluminescence method is proposed for the determination of sulfide in seawater based on the chemiluminescence reaction between sulfide and an acidic permanganate solution. 3-Cyclohexylaminopropanesulfonic acid was used as a chemiluminescence enhancer. By use of this method, 1-150 µM of sulfide could be determined in artificial seawater.

Open-cell titration of seawater for alkalinity measurements by colorimetry using bromophenol blue combined with a non-linear least-squares method.

The open-cell titration of seawater was studied for alkalinity measurements by colorimetry. 1) The colorimetric pH of free hydrogen ion concentration, pH(F(ind)), was calculated from the ratio of the absorbances at 436 and 590 nm (R = (590nm)A/(436nm)A), along with the molar absorption coefficient ratios (e(1), e(2) and e(3)/e(2)) and a tentative acid dissociation constant value (pK(a(2))). 2) The perturbation of hydrogen ion was evaluated from the change in titration mass (Deltam).

Tectonic pumping: earthquake-induced chemical flux detected in situ by a submarine cable experiment in Sagami Bay, Japan.

We successfully deployed an in situ automatic chemical analyzer sensitive to manganese (Mn) in seawater for a period of 81 days for the first time on the deep seafloor of Sagami Bay along a convergent plate boundary south of Japan. The in situ Mn analyzer (GAMOS-IV) was connected to a submarine cable as a means to supply power and to relay real time data. During the observation period from April 5 till June 25, 2006, the amount of measured Mn was seen to increase abruptly up to 10 times that of the background level only on April 21, probably triggered by a M5.

Simultaneous determination of suspended particulate trace metals (Co, Ni, Cu, Zn, Cd and Pb) in seawater with small volume filtration assisted by microwave digestion and flow injection inductively coupled plasma mass spectrometer.

A new technique for the determination of suspended particulate trace metals (P-metals >0.2 microm), such as Co, Ni, Cu, Zn, Cd and Pb, in open ocean seawater has been developed by using microwave digestion coupled with flow injection inductively coupled plasma mass spectrometry (FI-ICP-MS). Suspended particulate matter (SPM) was collected from 500 mL of seawater on a Nuclepore filter (0.

Interference-based electrochemical biosensor for the measurement of the concentration and isomer ratio of urocanic acid.

Urocanic acid (UCA) is known to be synthesized as the trans isomer (trans-UCA) in the skin, and trans-UCA is transformed by UV light to the cis isomer (cis-UCA), which may be involved in photoimmunosuppression. An electrochemical method has been developed for the measurement of the concentration and isomer ratio of UCA. A heme peptide-modified electrode (HP electrode) reduces hydrogen peroxide at +150 mV vs Ag/AgCl, and the reduction current is inhibited by UCA.