ABCA6 Regulates Chondrogenesis and Inhibits Joint Degeneration via Orchestrated Cholesterol Efflux and Cellular Senescence.

Patellar dysplasia (PD) can cause patellar dislocation and subsequent osteoarthritis (OA) development. Herein, a novel ABCA6 mutation contributing to a four-generation family with familiar patellar dysplasia (FPD) is identified. In this study, whole exome sequencing (WES) and genetic linkage analysis across a four-generation lineage presenting with six cases of FPD are conducted.

High-precision bioactive scaffold with dECM and extracellular vesicles targeting 4E-BP inhibition for cartilage injury repair.

The restoration of cartilage injuries remains a formidable challenge in orthopedics, chiefly attributed to the absence of vascularization and innervation in cartilage. Decellularized extracellular matrix (dECM) derived from cartilage, following antigenic removal through decellularization processes, has exhibited remarkable biocompatibility and bioactivity, rendering it a viable candidate for cartilage repair. Additionally, extracellular vesicles (EVs) generated from cartilage have demonstrated a synergistic effect when combined with dECM, potentially mitigating the inhibitory impact on protein synthesis by phosphorylating 4ebp, thereby promoting the synthesis of cartilage-related proteins such as collagen.

Senescence-targeted MicroRNA/Organoid composite hydrogel repair cartilage defect and prevention joint degeneration via improved chondrocyte homeostasis.

Introduction: Cartilage defect (CD) is a common complication in osteoarthritis (OA). Impairment of chondrogenesis and cellular senescence are considered as hallmarks of OA development and caused failure of cartilage repair in most clinical CD cases. Exploring markers for cellular senescence in CD patients might provide new perspectives for osteoarthritic CD patients.

An adaptive biodegradable zinc alloy with bidirectional regulation of bone homeostasis for treating fractures and aged bone defects.

Healing of fractures or bone defects is significantly hindered by overactivated osteoclasts and inhibited osteogenesis in patients with abnormal bone metabolism. Current clinical approaches using titanium alloys or stainless steel provide mechanical support but have no biological effects on bone regeneration. Therefore, designing and fabricating degradable metal materials with sufficient mechanical strength and bidirectional regulation of both osteoblasts and osteoclasts is a substantial challenge.

Nerve Growth Factor-Preconditioned Mesenchymal Stem Cell-Derived Exosome-Functionalized 3D-Printed Hierarchical Porous Scaffolds with Neuro-Promotive Properties for Enhancing Innervated Bone Regeneration.

The essential role of the neural network in enhancing bone regeneration has often been overlooked in biomaterial design, leading to delayed or compromised bone healing. Engineered mesenchymal stem cells (MSCs)-derived exosomes are becoming increasingly recognized as potent cell-free agents for manipulating cellular behavior and improving therapeutic effectiveness. Herein, MSCs are stimulated with nerve growth factor (NGF) to regulate exosomal cargoes to improve neuro-promotive potential and facilitate innervated bone regeneration.

Genetically inspired organoids prevent joint degeneration and alleviate chondrocyte senescence via Col11a1-HIF1α-mediated glycolysis-OXPHOS metabolism shift.

Introduction: Developmental dysplasia of hip (DDH) is a hip joint disorder leading to subsequent osteoarthritis. Previous studies suggested collagen XI alpha 1 (COL11A1) as a potential gene in hip dysplasia and chondrocyte degeneration. However, no genetic association has reported COL11A1-related cellular therapy as treatment of DDH and joint degeneration.

An osteosarcoma-on-a-chip model for studying osteosarcoma matrix-cell interactions and drug responses.

Marrow niches in osteosarcoma (OS) are a specialized microenvironment that is essential for the maintenance and regulation of OS cells. However, existing animal xenograft models are plagued by variability, complexity, and high cost. Herein, we used a decellularized osteosarcoma extracellular matrix (dOsEM) loaded with extracellular vesicles from human bone marrow-derived stem cells (hBMSC-EVs) and OS cells as a bioink to construct a micro-osteosarcoma (micro-OS) through 3D printing.

Detection of lineage-reprogramming efficiency of tumor cells in a 3D-printed liver-on-a-chip model.

The liver metastasis accompanied with the loss of liver function is one of the most common complications in patients with triple-negative breast cancers (TNBC). Lineage reprogramming, as a technique direct inducing the functional cell types from one lineage to another lineage without passing through an intermediate pluripotent stage, is promising in changing cell fates and overcoming the limitations of primary cells. However, most reprogramming techniques are derived from human fibroblasts, and whether cancer cells can be reversed into hepatocytes remains elusive.

Swelling compensation of engineered vasculature fabricated by additive manufacturing and sacrifice-based technique using thermoresponsive hydrogel.

Engineered vasculature is widely employed to maintain the cell viability within tissues. A variety of fabrication techniques for engineered vasculature have been explored, with combination of additive manufacturing with a sacrifice-based technique being the most common approach. However, the size deformation of vasculature caused by the swelling of sacrificial materials remains unaddressed.

Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration.

Mesoporous bioglass (MBG) with excellent osteointegration, osteoinduction, and biodegradability is a promising material for bone regeneration. However, its clinical application is hindered by complex processing and a lack of personalization, low mechanical strength, and uncontrollable degradation rate. In this study, we developed a double-bond-functionalized photocurable mesoporous bioglass (PMBG) sol that enabled ultrafast photopolymerization within 5 s.

A highly generalized classifier for osteoporosis radiography based on multiscale fractal, lacunarity, and entropy distributions.

Osteoporosis is a common degenerative disease with high incidence among aging populations. However, in regular radiographic diagnostics, asymptomatic osteoporosis is often overlooked and does not include tests for bone mineral density or bone trabecular condition. Therefore, we proposed a highly generalized classifier for osteoporosis radiography based on the multiscale fractal, lacunarity, and entropy distributions.

A Retrospective Comparative Study of Endoscopic Treatment of Gastrocnemius Contracture using the Modified Soft Tissue Release Kit.

: This study aimed to evaluate the effectiveness and safety of endoscopic gastrocnemius recession using the self-developed Modified Soft Tissue Release Kit. This retrospective review followed up 22 patients (34 feet) who underwent endoscopic surgery and 20 patients (30 feet) who received open surgery between January 2020 and January 2022. The American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and the maximum ankle dorsiflexion angle were evaluated preoperatively and at the last follow-up.

Regeneration of Humeral Head Using a 3D Bioprinted Anisotropic Scaffold with Dual Modulation of Endochondral Ossification.

Tissue engineering is theoretically thought to be a promising method for the reconstruction of biological joints, and thus, offers a potential treatment alternative for advanced osteoarthritis. However, to date, no significant progress is made in the regeneration of large biological joints. In the current study, a biomimetic scaffold for rabbit humeral head regeneration consisting of heterogeneous porous architecture, various bioinks, and different hard supporting materials in the cartilage and bone regions is designed and fabricated in one step using 3D bioprinting technology.

A Retrospective Clinical Study of Endoscopic Treatment of Carpal Tunnel Syndrome using the Modified Soft Tissue Release kit.

Objective: Carpal tunnel syndrome (CTS) is the most common peripheral entrapment neuropathy, and endoscopic carpal tunnel release (ECTR) is one of the minimally invasive procedures for the treatment of CTS. Based on the shortcomings of ECTR, we designed the "Modified Soft Tissue Release Kit" to assist the endoscopic operation. This study aimed to evaluate the effectiveness and safety of endoscopic treatment of CTS using this kit.

Research Progress of Robot Technology in 3D Bioprinting.

Three-dimensional (3D) bioprinting is an emerging research direction in bio-manufacturing, a landmark in the shift from traditional manufacturing to high-end manufacturing. It integrates manufacturing science, biomedicine, information technology, and material science. bioprinting is a type of 3D bioprinting which aims to print tissues or organs directly on defective sites in the human body.

A retrospective study of the mid-term efficacy of full-endoscopic annulus fibrosus suture following lumbar discectomy.

Aims: Full-endoscopic discectomy is associated with a high risk of disc reherniation due to the poor mechanical strength of the annulus fibrosus after scar healing. It is technically difficult to place a full-endoscopic annulus fibrosus suture. We designed an annulus fibrosus suture device that can be used to suture annulus defects under microendoscopy.

Outcomes of V-cut Osteotomy on the First Metatarsal Head Combined with Fixation in Mortise-shaped Bone Groove-Plasty and Akin Osteotomy on the First Toe for Hallux Valgus Correction.

Objective: Hallux valgus (HV) is a common foot deformity, and recurrence is one of the most serious complications after HV correction. As a result, the surgical technique with a lower recurrence rate is a dream. The purpose of the article should be to observe the correction effect of hallux valgus using a novel "V-cut" osteotomy on the first metatarsal head combined with fixation in mortise-shaped bone groove-plasty technique.

Chondrogenic primed extracellular vesicles activate miR-455/SOX11/FOXO axis for cartilage regeneration and osteoarthritis treatment.

Osteoarthritis (OA) is the leading cause of disability worldwide. Considerable progress has been made using stem-cell-derived therapy. Increasing evidence has demonstrated that the therapeutic effects of BMSCs in chondrogenesis could be attributed to the secreted small extracellular vesicles (sEVs).

Interactive effects of cerium and copper to tune the microstructure of silicocarnotite bioceramics towards enhanced bioactivity and good biosafety.

Endowing biomaterials with functional elements enhances their biological properties effectively. However, improving bioactivity and biosafety simultaneously is still highly desirable. Herein, cerium (Ce) and copper (Cu) are incorporated into silicocarnotite (CPS) to modulate the constitution and microstructure for degradability, bioactivity and biosafety regulation.

Application of 3D printing individualized guide plates in percutaneous needle biopsy of acetabular tumors.

The objective of the study was to investigate the effectiveness of applying the individualized guide plate which is based on digital image processing and 3D printing technology to percutaneous needle biopsy of periacetabular tumor. From July 2017 to August 2019, 11 patients (5 males and 6 females, aged 13-70 years, mean 42.3 years) with acetabular tumors diagnosed by needle biopsy in our hospital were enrolled in this retrospective study.

Modified Biodegradation Behavior Induced Beneficial Microenvironments for Bone Regeneration by Low Addition of Gadolinium in Zinc.

Zinc (Zn) shows a great potential as a biodegradable material for bone implants after a decade of systematic research and development. However, uncontrollable biodegradation behavior and biphasic dose-response prevent Zn from fulfilling its essential role in facilitating bone regeneration. In this study, the low addition of gadolinium (Gd) modifies the intrinsic microstructure of Zn in terms of grain size distribution, grain boundary misorientation, and texture.

Three-dimensional printing bilayer membranous nanofiber scaffold for inhibiting scar hyperplasia of skin.

Hypertrophic scar (HS) is the manifestation of pathological wound healing, which affects the beauty of patients, and even affects the normal physical functions of patients. We aimed to develop a 3D printing layer membranous nanofiber scaffold similar to skin structure. Among them, poly (lactic-co-glycolic acid) copolymer (PLGA) nanofibers were used as the "epidermis" layer above, and a decellular dermis matrix (dECM) nanofiber scaffold was used as the "dermis" layer below.

Erratum: 3D-bioprinting ready-to-implant anisotropic menisci recapitulate healthy meniscus phenotype and prevent secondary joint degeneration: Erratum.

[This corrects the article DOI: 10.7150/thno.54864.

Distal Humeral Trochlear Geometry Associated With the Spatial Variation of the Dynamic Elbow Flexion Axis.

The complexity of the spatial dynamic flexion axis (DFA) of the elbow joint makes the elbow prosthesis design and humeral component alignment challenging. This study aimed to 1) investigate the variations of the spatial DFA during elbow flexion and 2) investigate the relationship between the distal humeral trochlear geometry and the spatial variation of the DFA. Ten healthy subjects participated in this study.