Superselective Hydrogen Separation through a Mixed Conducting Graphene Oxide Membrane.

A cost-effective H separation method is required for the purification of gaseous mixtures containing H. Thus, in this study, we investigate the H separation properties of Ce ion-doped partially reduced graphene oxide (prGO) membranes. Pt/C-catalyst-coated, dense, micrometer-thick membranes are fabricated by stacking Ce-prGO nanosheets, followed by thermal annealing.

Anomalous Proton Blocking Property of Pore-Free Graphene Oxide Membrane.

Graphene oxide (GO) has been attracting intensive attention as a flexible barrier film, however, provides no barrier for proton transfer due to its out-of-plane proton conductivity (10 S cm) based on nanoscale defects with oxygen functional groups. In this study, it is reported that a pore-free GO (Pf-GO) membrane with controlled oxygen functional groups exhibits unexpected proton blocking behavior (10 S cm). Proton permeation tests conducted in aqueous solution demonstrate that proton permeation is below the detection limit, and lithium metal foils coated with the Pf-GO show higher chemical stability to water than those coated with previously reported GO.

Hydrogen-Bonded Metal-Organic Framework Nanosheet as a Proton Conducting Membrane for an H/O Fuel Cell.

Proton-conducting metal-organic frameworks (MOFs) have attracted attention as potential electrolytes for fuel cells. However, research progress in utilizing MOFs as electrolytes for fuel cells has been limited, mainly due to challenges associated with issues such as the fabrication of MOF membranes, and hydrogen crossover through the MOF's pores. Here, proton conductivity and fuel cell performance of a self-standing membrane prepared from of a bismuth subgallate MOF nanosheets with non-porous structure are reported.

Bandgap Tunable Oxynitride LaNb O N Nanosheets.

Bandgap tunable lanthanum niobium oxynitride [LaNb O N ] nanosheet is prepared by the delamination of a Ruddlesden-Popper phase perovskite oxynitride via ion-exchange and two-step intercalation processes. The lanthanum niobium oxynitride nanosheets have a homogeneous thickness of 1.6 nm and exhibit a variety of chromatic colors depending on the nitridation temperature of the parent-layered oxynitride.

Oxygen reduction reaction activity of an iron phthalocyanine/graphene oxide nanocomposite.

Electrocatalysts with metal-nitrogen-carbon (M-N-C) sites have recently attracted much attention as potential catalysts for the oxygen reduction reaction (ORR), and a hybrid of iron phthalocyanine (FePc) and reduced graphene oxide (rGO) is one of the promising candidates. Herein, a FePc/GO nanocomposite was synthesized by electrostatic deposition on the electrode. The electrochemically reduced FePc/GO nanocomposite (ER(FePc/GO)) contained Fe centers in well reduced graphene sites without agglomeration.

Seamless All-Solid-State Supercapacitor Fabricated Using a Proton-Conducting Methanesulfonic Acid-Intercalated Graphene Oxide Film as an Electrolyte.

An all-solid-state supercapacitor with no boundary between the electrode/electrolyte interface is prepared using methanesulfonic acid (MSA)-intercalated graphene oxide (GO)　membranes as a proton-conducting electrolyte. The electrodes (reduced GO) are formed within the surface of the solid GO electrolyte by a combination of self-reduction of the GO under UV-light illumination and electrochemical reduction. In this process, the surface of the GO film is converted to an electrode material with mixed electron/proton conduction, which results in the formation of a seamless capacitor structure.

Slide-Ring Material/Highly Dispersed Graphene Oxide Composite with Mechanical Strength and Tunable Electrical Conduction as a Stretchable-Base Substrate.

The development of stretchable elastomer composites with considerable mechanical strength and electrical conductivity is desired for future applications in communication tools, healthcare, and robotics. Herein, we have developed a novel stretchable elastomer composite by employing a slide-ring (SR) material as a matrix for restoration and graphene oxide (GO) as a precursor for a conductive filler. Highly dispersed GO in an organic solvent, prepared via a new method developed by the authors, allowed the uniform dispersion of GO into the matrix by simply mixing the solvent and SR.

Production of water-dispersible reduced graphene oxide without stabilizers using liquid-phase photoreduction.

We successfully produced water-dispersible reduced graphene oxide (rGO) by pH tuning liquid-phase photoreduction. In this method, the stabilizers and chemical modification usually used for dispersing rGO are not required. The stable carboxyl groups continue to ionize throughout the photoreduction process under alkaline conditions and continue to provide water-dispersible rGO.

All-Graphene Oxide Flexible Solid-State Supercapacitors with Enhanced Electrochemical Performance.

The rapid development of flexible and wearable electronics has led to an increase in the demand for flexible supercapacitors with enhanced electrochemical performance. Graphene oxide (GO) and reduced GO (rGO) exhibit several key properties required for supercapacitor components. Although solid-state rGO/GO/rGO supercapacitors with unique structures are promising, their moderate capacitance is inadequate for practical applications.

Solid Electrolyte Gas Sensor Based on a Proton-Conducting Graphene Oxide Membrane.

Graphene oxide (GO) is an ultrathin carbon nanosheet with various oxygen-containing functional groups. The utilization of GO has attracted tremendous attention in a number of areas, such as electronics, optics, optoelectronics, catalysis, and bioengineering. Here, we report the development of GO-based solid electrolyte gas sensors that can continuously detect combustible gases at low concentrations.

Thermally Stable Super Ionic Conductor from Carbon Sphere Oxide.

A highly stable proton conductor has been developed from carbon sphere oxide (CSO). Carbon sphere (CS) generated from sucrose was oxidized successfully to CSO using Hummers' graphite oxidation technique. At room temperature and 90 % relative humidity, the proton conductivity of thin layer CSO on microsized comb electrode was found to be 8.

All-graphene oxide device with tunable supercapacitor and battery behaviour by the working voltage.

We propose a new type of all-graphene oxide device. Reduced graphene oxide (rGO)/graphene oxide (GO)/rGO functions as both a supercapacitor and a battery, depending on the working voltage. The rGO/GO/rGO operates as a supercapacitor until 1.

Coal Oxide as a Thermally Robust Carbon-Based Proton Conductor.

Inexpensive solid proton conducting materials with high proton conductivity and thermal stability are necessary for practical solid state electrochemical devices. Here we report that coal oxide (CO) is a promising carbon-based proton conductor with remarkable thermal robustness. The CO produced by simple liquid-phase oxidation of coal demonstrates excellent dispersibility in water owing to the surface carboxyl groups.

Optimization of proton conductivity in graphene oxide by filling sulfate ions.

Graphene oxide (GO) walled channels filled by sulfate ions exhibit an optimized proton conductivity, which is higher than the proton conductivity of all other forms of GO. The sulphate ion increases the water absorbing capacity and hydrogen bond reformation process in GO.

Reversibly tunable upconversion luminescence by host-guest chemistry.

Tuning upconversion (UPC) luminescence using external stimuli and fields, as well as chemical reactions, is expected to lead to novel and efficient optical sensors. Herein, highly tunable UPC luminescence was achieved through a host-guest chemistry approach. Specifically, interlayer ion exchange reactions reversibly tuned the emission intensity and green-red color of Er/Yb-codoped A2La2Ti3O10 layered perovskite, where A corresponds to proton and alkali metal ions, enabling the visualization of host-guest interactions and reactions.

Metal permeation into multi-layered graphene oxide.

Understanding the chemical and physical properties of metal/graphene oxide (M/GO) interfaces is important when GO is used in electronic and electrochemical devices because the metal layer must be firmly attached to GO. Here, permeation of metal from the surface into GO paper bulk at the M/GO interface was observed at room temperature for metals such as Cu, Ag, Ni, Au, and Pt. Cu, Ag, and Ni quickly permeated GO as ions into the bulk under humid conditions.

DNA analysis based on toehold-mediated strand displacement on graphene oxide.

Fluorescent dye-labeled probe DNA was immobilized on fluorescence-quenching graphene oxide (GO) through a capture DNA. When targets were added, the probes were released from the GO through toehold-mediated strand exchange. Higher emission recovery and more signal contrast were achieved relative to conventional methods that are based on direct adsorption of probes.

Graphene oxide nanosheet with high proton conductivity.

We measured the proton conductivity of bulk graphite oxide (GO'), a graphene oxide/proton hybrid (GO-H), and a graphene oxide (GO) nanosheet for the first time. GO is a well-known electronic insulator, but for proton conduction we observed the reverse trend, as it exhibited superionic conductivity. The hydrophilic sites present in GO as -O-, -OH, and -COOH functional groups attract the protons, which propagate through hydrogen-bonding networks along the adsorbed water film.

Simple photoreduction of graphene oxide nanosheet under mild conditions.

Graphene oxide (GO) nanosheets were reduced by UV irradiation in H2 or N2 under mild conditions (at room temperature) without a photocatalyst. Photoreduction proceeded even in an aqueous suspension of nanosheets. The GO nanosheets reduced by this method were analyzed by X-ray photoelectron spectroscopy and Raman spectroscopy.