Surfactant induced gelation of TEMPO-oxidized cellulose nanofibril dispersions probed using small angle neutron scattering.

In this work, we studied TEMPO-oxidized cellulose nanofibril (OCNF) suspensions in the presence of diverse surfactants. Using a combination of small angle neutron scattering (SANS) and rheology, we compared the physical properties of the suspensions with their structural behavior. Four surfactants were studied, all with the same hydrophobic tail length but different headgroups: hexaethylene glycol mono-n-dodecyl ether (CEO, nonionic), sodium dodecyl sulfate (SDS, anionic), cocamidopropyl betaine (CapB, zwitterionic), and dodecyltrimethylammonium bromide (DTAB, cationic).

Recent progress in Pickering emulsions stabilised by bioderived particles.

In recent years, the demand for non-surfactant based Pickering emulsions in many industrial applications has grown significantly because of the option to select biodegradable and sustainable materials with low toxicity as emulsion stabilisers. Usually, emulsions are a dispersion system, where synthetic surfactants or macromolecules stabilise two immiscible phases (typically water and oil phases) to prevent coalescence. However, synthetic surfactants are not always a suitable choice in some applications, especially in pharmaceuticals, food and cosmetics, due to toxicity and lack of compatibility and biodegradability.

Stable Cellulose Nanofibril Microcapsules from Pickering Emulsion Templates.

Electrostatic attractions are essential in any complex formation between the nanofibrils of the opposite charge for a specific application, such as microcapsule production. Here, we used cationized cellulose nanofibril (CCNF)-stabilized Pickering emulsions (PEs) as templates, and the electrostatic interactions were induced by adding oxidized cellulose nanofibrils (OCNFs) at the oil-water interface to form microcapsules (MCs). The oppositely charged cellulose nanofibrils enhanced the solidity of interfaces, allowing the encapsulation of Nile red (NR) in sunflower oil droplets.

Long-Term Culture of Stem Cells on Phosphate-Based Glass Microspheres: Synergistic Role of Chemical Formulation and 3D Architecture.

Phosphate-based glasses (PBGs) are biomaterials that degrade under physiological conditions and can be modified to release various ions depending on end applications. This study utilized slow-degrading (P45:45PO-16CaO-24MgO-11NaO-4FeO, mol %) and comparatively faster degrading (P40:40PO-16CaO-24MgO-20NaO, mol %) PBG microspheres with or without porosity, to evaluate the combined effect of chemical formulation and geometry on human mesenchymal stem cells (MSCs), a clinically relevant cell source for orthopedic applications. Scanning electron microscopy showed 2, 46, and 29% of P45 bulk (P45-B), P40 bulk (P40-B), and P40 porous (P40-P) microspheres, respectively, that had cracks or peeling off surfaces after 42 days of incubation in culture medium.

Salt-Responsive Pickering Emulsions Stabilized by Functionalized Cellulose Nanofibrils.

Oil-in-water emulsions have been stabilized by functionalized cellulose nanofibrils bearing either a negative (oxidized cellulose nanofibrils, OCNF) or a positive (cationic cellulose nanofibrils, CCNF) surface charge. The size of the droplets was measured by laser diffraction, while the structure of the shell of the Pickering emulsion droplets was probed using small-angle neutron scattering (SANS), confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and rheology measurements. Both OCNF- and CCNF-stabilized emulsions present a very thick shell (>100 nm) comprised of densely packed CNF.

Monovalent Salt and pH-Induced Gelation of Oxidised Cellulose Nanofibrils and Starch Networks: Combining Rheology and Small-Angle X-ray Scattering.

Water quality parameters such as salt content and various pH environments can alter the stability of gels as well as their rheological properties. Here, we investigated the effect of various concentrations of NaCl and different pH environments on the rheological properties of TEMPO-oxidised cellulose nanofibril (OCNF) and starch-based hydrogels. Addition of NaCl caused an increased stiffness of the OCNF:starch (1:1 wt%) blend gels, where salt played an important role in reducing the repulsive OCNF fibrillar interactions.

Non-volatile conductive gels made from deep eutectic solvents and oxidised cellulose nanofibrils.

Ionogels offer huge potential for a number of applications including wearable electronics and soft sensors. However, their synthesis has been limited and often relies on non-renewable or non-biocompatible components. Here we present a novel two-component ionogel made using just deep eutectic solvents (DESs) and cellulose.

Effect of varying the Mg with Ca content in highly porous phosphate-based glass microspheres.

This paper reports on the role of phosphate-based glass (PBG) microspheres and their physicochemical properties including in vitro biological response to human mesenchymal stem cells (hMSCs). Solid and porous microspheres were prepared via a flame spheroidisation process. The Mg content in the PBG formulations explored was reduced from 24 to 2 mol% with a subsequent increase in Ca content.

Self-assembly of amphiphilic polyoxometalates for the preparation of mesoporous polyoxometalate-titania catalysts.

Amphiphilic polyoxometalate (POM) surfactants were prepared by covalently grafting double hydrophobic tails with chain lengths C12H25, C14H29, C16H33 or C18H37 onto the lacunary Wells-Dawson {P2W17O61} headgroup. The critical micelle concentrations (CMCs) of these novel surfactants in aqueous solutions were determined by conductivity, and micelle formation was studied by small angle neutron scattering (SANS). Surprisingly, the amphiphiles with longer hydrophobic tails tend to form less elongated and more globular micelles in water.

Deep eutectic solvent in water pickering emulsions stabilised by cellulose nanofibrils.

Deep eutectic solvent (menthol : dodecanoic acid) in water (30 : 70) emulsions stabilised with partially oxidised cellulose nanoparticles remained stable for 200 days at room temperature. Deep eutectic-based emulsions offer potential for non-aqueous reaction systems, chemical extraction, and controlled release. Pickering emulsions using polysaccharides are less toxic and more stable than surfactant-stabilised emulsions.

Impact of wormlike micelles on nano and macroscopic structure of TEMPO-oxidized cellulose nanofibril hydrogels.

In this work, we investigated the effect of adding surfactant mixtures on the rheological properties of TEMPO-oxidized cellulose nanofibril (OCNF) saline dispersions. Three surfactant mixtures were studied: cocamidopropyl betaine (CAPB)/sodium dodecyl sulfate (SDS), which forms wormlike micelles (WLMs); cocamidopropylamine oxide (CAPOx)/SDS, which forms long rods; and CAPB/sodium lauroyl sarcosinate (SLS), which forms spherical micelles. The presence of micelles in these surfactant mixtures, independent of their morphology, leads to an increase of tan δ, making the gels less solid-like, therefore acting as a plasticizer.

Core-Shell Spheroidal Hydrogels Produced via Charge-Driven Interfacial Complexation.

Through charge-driven interfacial complexation, we produced millimeter-sized spheroidal hydrogels (SH) with a core-shell structure allowing long-term stability in aqueous media. The SH were fabricated by extruding, dropwise, a cationic cellulose nanofibril (CCNF) dispersion into an oppositely charged poly(acrylic acid) (PAA) bath. The SH have a solid-like CCNF-PAA shell, acting as a semipermeable membrane, and a liquid-like CCNF suspension in the core.

Filler size effect in an attractive fibrillated network: a structural and rheological perspective.

The effect of the filler size on the structural and mechanical properties of an attractive fibrillated network composed of oxidised cellulose nanofibrils (OCNF) in water was investigated. Silica nanoparticles with a diameter of ca. 5 nm (SiNp5) and and ca.

Cationic surfactants as a non-covalent linker for oxidised cellulose nanofibrils and starch-based hydrogels.

Rheological properties of hydrogels composed of TEMPO-oxidised cellulose nanofibrils (OCNF)-starch in the presence of cationic surfactants were investigated. The cationic surfactants dodecyltrimethylammonium bromide (DTAB) and cetyltrimethylammonium bromide (CTAB) were used to trigger gelation of OCNF at around 5 mM surfactant. As OCNF and DTAB/CTAB are oppositely charged, an electrostatic attraction is suggested to explain the gelation mechanism.

Formulating injectable pastes of porous calcium phosphate glass microspheres for bone regeneration applications.

Current trends in regenerative medicine treatments for bone repair applications focus on cell-based therapies. These aim to deliver the treatment via a minimally invasive injection to reduce patient trauma and to improve efficacy. This paper describes the injectability of porous calcium phosphate glass microspheres to be used for bone repair based on their formulation, rheology and flow behavior.

The effect of MgO/TiO on structural and crystallization behavior of near invert phosphate-based glasses.

Varying formulations in the glass system of 40P O ─(24 - x)MgO─(16 + x)CaO─(20 - y)Na O─yTiO (where 0 ≤ x ≤ 22 and y = 0 or 1) were prepared via melt-quenching. The structure of the glasses was confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), micro Raman and solid-state nuclear magnetic resonance (NMR) spectroscopies. The thermal properties and the activation energy of crystallization (E ) were measured using thermal analysis and the Kissinger equation, respectively.

Porous Phosphate-Based Glass Microspheres Show Biocompatibility, Tissue Infiltration, and Osteogenic Onset in an Ovine Bone Defect Model.

Phosphate-based glasses (PBGs) are bioactive and fully degradable materials with tailorable degradation rates. PBGs can be produced as porous microspheres through a single-step process, using changes in their formulation and geometry to produce varying pore sizes and interconnectivity for use in a range of applications, including biomedical use. Calcium phosphate PBGs have recently been proposed as orthobiologics, based on their in vitro cytocompatibility and ion release profile.

Flame-Spheroidized Phosphate-Based Glass Particles with Improved Characteristics for Applications in Mesenchymal Stem Cell Culture Therapy and Tissue Engineering.

The chemical formulation of phosphate-based glasses (PBGs) can be tailored to fit particular end applications such as bone tissue engineering. While most reports to date have evaluated the effect of PBG chemical formulation on bone cells, this study specifically explored the manufacturing process, the changes in physical and chemical properties of PBG particles after flame spheroidization, and subsequent effects on human mesenchymal stem cells (hMSCs), a prime cell type for regenerative medicine applications. Flame spheroidization involves feeding irregular PBG particles (microparticles, MP) into a hot flame, causing them to melt and mold into solid spherical PBG particles (microspheres, MS).

Flexible and transparent films produced from cellulose nanowhisker reinforced agarose.

Transparent and flexible nanocomposite films with a range of Agarose to Cellulose Nano-Whisker (CNW) ratios were produced using never-dried CNWs. The incorporation of never-dried CNWs within Agarose played an important role in the surface roughness (Ra 7-15 nm) and light transparency of the films (from 84 to 90%). Surface induced crystallisation of Agarose by CNWs was also found with increasing percentage of crystallinity (up to 79%) for the nanocomposite films, where CNW acted as nucleating sites.

Porous calcium phosphate glass microspheres for orthobiologic applications.

Unlabelled: Orthobiologics is a rapidly advancing field utilising cell-based therapies and biomaterials to enable the body to repair and regenerate musculoskeletal tissues. This paper reports on a cost-effective flame spheroidisation process for production of novel porous glass microspheres from calcium phosphate-based glasses to encapsulate and deliver stem cells. Careful selection of the glass and pore-forming agent, along with a manufacturing method with the required processing window enabled the production of porous glass microspheres via a single-stage manufacturing process.

Bioactive calcium phosphate-based glasses and ceramics and their biomedical applications: A review.

An overview of the formation of calcium phosphate under in vitro environment on the surface of a range of bioactive materials (e.g. from silicate, borate, and phosphate glasses, glass-ceramics, bioceramics to metals) based on recent literature is presented in this review.

Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications.

Tubular scaffolds with aligned polylactic acid (PLA) fibres were fabricated for cell guide applications by immersing rolled PLA fibre mats into a polyvinyl acetate (PVAc) solution to bind the mats. The PVAc solution was also mixed with up to 30 wt % β-tricalcium phosphate (β-TCP) content. Cross-sectional images of the scaffold materials obtained via scanning electron microscopy (SEM) revealed the aligned fibre morphology along with a significant number of voids in between the bundles of fibres.

Development of microspheres for biomedical applications: a review.

An overview of microspheres manufactured for use in biomedical applications based on recent literature is presented in this review. Different types of glasses (i.e.

Effect of cellulose nanowhiskers on surface morphology, mechanical properties, and cell adhesion of melt-drawn polylactic Acid fibers.

Polylactic acid (PLA) fibers were produced with an average diameter of 11.2 (± 0.9) μm via a melt-drawing process.