Zr- and Hf-based nanoscale metal-organic frameworks as contrast agents for computed tomography.

Nanoscale metal-organic frameworks (NMOFs) of the UiO-66 structure containing high Zr (37 wt%) and Hf (57 wt%) content were synthesized and characterized, and their potential as contrast agents for X-ray computed tomography (CT) imaging was evaluated. Hf-NMOFs of different sizes were coated with silica and poly(ethylene glycol) (PEG) to enhance biocompatibility, and were used for in vivo CT imaging of mice, showing increased attenuation in the liver and spleen.

Pt nanoparticles@photoactive metal-organic frameworks: efficient hydrogen evolution via synergistic photoexcitation and electron injection.

Pt nanoparticles of 2-3 nm and 5-6 nm in diameter were loaded into stable, porous, and phosphorescent metal-organic frameworks (MOFs 1 and 2) built from [Ir(ppy)(2)(bpy)](+)-derived dicarboxylate ligands (L(1) and L(2)) and Zr(6)(μ(3)-O)(4)(μ(3)-OH)(4)(carboxylate)(12) secondary building units, via MOF-mediated photoreduction of K(2)PtCl(4). The resulting Pt@MOF assemblies serve as effective photocatalysts for hydrogen evolution by synergistic photoexcitation of the MOF frameworks and electron injection into the Pt nanoparticles. Pt@2 gave a turnover number of 7000, approximately five times the value afforded by the homogeneous control, and could be readily recycled and reused.

Metal-organic framework templated synthesis of Fe2O3/TiO2 nanocomposite for hydrogen production.

A new metal-organic framework (MOF)-templated method has been developed for the synthesis of a metal oxide nanocomposite with interesting photophysical properties. Fe-containing nanoscale MOFs are coated with amorphous titania, then calcined to produce crystalline Fe(2)O(3)/TiO(2) composite nanoparticles. This material enables photocatalytic hydrogen production from water using visible light, which cannot be achieved by either Fe(2)O(3) or TiO(2) alone or a mixture of the two.

Light-harvesting cross-linked polymers for efficient heterogeneous photocatalysis.

Nonporous, phosphorescent cross-linked polymers (Ru-CP and Ir-CP) were synthesized via Pd-catalyzed Sonogashira cross-coupling reactions between tetra(p-ethynylphenyl)methane and dibrominated Ru(bpy)(3)(2+) or Ir(ppy)(2)(bpy)(+), respectively. The resultant particulate cross-linked polymer (CP) materials have very high catalyst loadings (76.3 wt % for Ru-CP and 71.

Electrochemical water oxidation with carbon-grafted iridium complexes.

Hydrogen production from water splitting provides a potential solution to storing harvested solar energy in chemical fuels, but this process requires active and robust catalysts that can oxidize water to provide a source of electrons for proton reduction. Here we report the direct, covalent grafting of molecular Ir complexes onto carbon electrodes, with up to a monolayer coverage. Carbon-grafted Ir complexes electrochemically oxidize water with a turnover frequency of up to 3.

Lipid-Coated Nanoscale Coordination Polymers for Targeted Delivery of Antifolates to Cancer Cells.

Nanoscale coordination polymers (NCPs) have been demonstrated as an interesting platform for drug delivery, as they possess many advantages over small-molecule chemotherapeutics, such as high payloads, lower systemic toxicity, tunability, and enhanced tumor uptake. Existing formulations for the delivery of methotrexate (MTX), an antifolate cancer drug, have very low drug loadings. Herein, we report the incorporation of MTX as a building block in an NCP formulation with exceptionally high drug loadings (up to 79.

Doping metal-organic frameworks for water oxidation, carbon dioxide reduction, and organic photocatalysis.

Catalytically competent Ir, Re, and Ru complexes H(2)L(1)-H(2)L(6) with dicarboxylic acid functionalities were incorporated into a highly stable and porous Zr(6)O(4)(OH)(4)(bpdc)(6) (UiO-67, bpdc = para-biphenyldicarboxylic acid) framework using a mix-and-match synthetic strategy. The matching ligand lengths between bpdc and L(1)-L(6) ligands allowed the construction of highly crystalline UiO-67 frameworks (metal-organic frameworks (MOFs) 1-6) that were doped with L(1)-L(6) ligands. MOFs 1-6 were isostructural to the parent UiO-67 framework as shown by powder X-ray diffraction (PXRD) and exhibited high surface areas ranging from 1092 to 1497 m(2)/g.

Highly stable and porous cross-linked polymers for efficient photocatalysis.

Porous cross-linked polymers (PCPs) with phosphorescent [Ru(bpy)(3)](2+) and [Ir(ppy)(2)(bpy)](+) building blocks were obtained via octacarbonyldicobalt (Co(2)(CO)(8))-catalyzed alkyne trimerization reactions. The resultant Ru- and Ir-PCPs exhibited high porosity with specific surface areas of 1348 and 1547 m(2)/g, respectively. They are thermally stable at up to 350 °C in air and do not dissolve or decompose in all solvents tested, including concentrated hydrochloric acid.

Porous phosphorescent coordination polymers for oxygen sensing.

Phosphorescent cyclometalated iridium tris(2-phenylpyridine) derivatives were designed and incorporated into coordination polymers as tricarboxylate bridging ligands. Three different crystalline coordination polymers were synthesized using a solvothermal technique and were characterized using a variety of methods, including single-crystal X-ray diffraction, PXRD, TGA, IR spectroscopy, gas adsorption measurements, and luminescence measurements. The coordination polymer built from Ir[3-(2-pyridyl)benzoate](3), 1, was found to be highly porous with a nitrogen BET surface area of 764 m(2)/g, whereas the coordination polymers built from Ir[4-(2-pyridyl)benzoate](3), 2 and 3, were nonporous.

Development of an ultraperformance liquid chromatography/mass spectrometry method to quantify cisplatin 1,2 intrastrand guanine-guanine adducts.

Platinum chemotherapeutic agents have been widely used in the treatment of cancer. Cisplatin was the first of the platinum-based chemotherapeutic agents and therefore has been extensively studied as an antitumor agent since the late 1960s. Because this agent forms several DNA adducts, a highly sensitive and specific quantitative assay is needed to correlate the molecular dose of individual adducts with the effects of treatment.

Copper(I) cyanide networks: synthesis, structure, and luminescence behavior. Part 2. Piperazine ligands and hexamethylenetetramine.

A variety of photoluminescent, and in some cases thermochromic, metal-organic networks of CuCN were self-assembled in aqueous reactions with amine ligands: (CuCN) 2(Pip) ( 1a), (CuCN) 20(Pip) 7 ( 1b), (CuCN) 7(MePip) 2 ( 2), (CuCN) 2(Me 2Pip) ( 3a), (CuCN) 4(Me 2Pip) ( 3b), (CuCN) 7(EtPip) 2 ( 4), (CuCN) 4(Et 2Pip) ( 5), (CuCN) 3(BzPip) 2 ( 6a), (CuCN) 5(BzPip) 2 ( 6b), (CuCN) 7(BzPip) 2 ( 6c), (CuCN) 4(BzPip) ( 6d), (CuCN) 2(Bz 2Pip) ( 7), (CuCN)(Ph 2CHPip) ( 8a), (CuCN) 2(Ph 2CHPip) ( 8b), (CuCN) 3(HMTA) 2 ( 9a), (CuCN) 5(HMTA) 2 ( 9b), and (CuCN) 5(HMTA) ( 9c) (Pip = piperazine, MePip = N-methylpiperazine, Me 2Pip = N, N'-dimethylpiperazine, EtPip = N-ethylpiperazine, Et 2Pip = N, N'-diethylpiperazine, BzPip = N-benzylpiperazine, Bz 2Pip = N, N'-dibenzylpiperazine, Ph 2CHPip = N-(diphenylmethyl)piperazine, and HMTA = hexamethylenetetramine). New X-ray structures are reported for 1b, 2, 3b, 4, 5, 6a, 6d, 7, 8b, 9b, and 9c. An important structural theme is the formation of (6,3) (CuCN) 2(piperazine) sheets with or without threading of independent CuCN chains.

Poly[mu-2-aminopyrazine-kappa2N1:N4-mu-cyanido-copper(I)]: a three-dimensional network from laboratory powder diffraction data.

In the title compound, [Cu(CN)(C(4)H(5)N(3))](n) or [Cu(mu-CN)(mu-PyzNH(2))](n) (PyzNH(2) is 2-aminopyrazine), the Cu(I) center is tetrahedrally coordinated by two cyanide and two PyzNH(2) ligands. The Cu(I)-cyano links give rise to [Cu-CN](infinity) chains running along the c axis, which are bridged by bidentate PyzNH(2) ligands. The three-dimensional framework can be described as being formed by two interpenetrated three-dimensional honeycomb-like networks, both made of 26-membered rings of composition [Cu(6)(mu-CN)(2)(mu-PyzNH(2))(4)].

Threaded structure and blue luminescence of (CuCN)20(Piperazine)7.

The structurally unique and highly luminescent 20 : 7 complex of CuCN with piperazine (Pip) was formed under aqueous conditions; its structure reveals two interpenetrated 2D sub-networks in 6 : 1 ratio: (CuCN)2(Pip) and (CuCN)8(Pip), the latter consisting of Cu18(CN)16(Pip)2 macrocycles.

Copper(I) cyanide networks: synthesis, luminescence behavior and thermal analysis. Part 1. Diimine ligands.

Metal-organic networks of CuCN with diimines (L) = pyrazine (Pyz), 2-aminopyrazine (PyzNH(2)), quinoxaline (Qox), phenazine (Phz), 4,4'-bipyridyl (Bpy), pyrimidine (Pym), 2-aminopyrimidine (PymNH(2)), 2,4-diaminopyrimidine (Pym(NH(2))(2)), 2,4,6-triaminopyrimidine (Pym(NH(2))(3)), quinazoline (Qnz), pyridazine (Pdz), and phthalazine (Ptz) were studied. Open reflux reactions produced complexes (CuCN)(2)(L) for L = Qox, Phz, Bpy, PymNH(2), Pym(NH(2))(2), Qnz, and Pdz and (CuCN)(3)(L) complexes for L = Pyz, PyzNH(2), Qox, Bpy, Pym(NH(2))(3), and Pdz. Also produced were (CuCN)(3)(Pyz)(2), (CuCN)(PyzNH(2)), (CuCN)7(Pym)(2), (CuCN)(5)(Qnz)(2) and (CuCN)(5)(Ptz)(2).