Study of the Effect of Temperature on the Production of Carrageenan-Based Buccal Films and Optimization of the Process Parameters.

Background/objectives: Films in the mouth offer a promising alternative drug delivery system for oral administration, with several advantages over traditional oral formulations. Furthermore, their non-invasive nature and easy administration make them conducive to increasing patient compliance. The use of active agents in these films can further improve their drug delivery properties, making them an even more useful drug delivery system.

Investigation of the Electrokinetic Potential of Granules and Optimization of the Pelletization Method Using the Quality by Design Approach.

The preparation of pellets using a high-shear granulator in a rapid single-step is considered a good economic alternative to the extrusion spheronization process. As process parameters and material attributes greatly affect pellet qualities, successful process optimization plays a vital role in producing pellet dosage forms with the required critical quality attributes. This study was aimed at the development and optimization of the pelletization technique with the Pro-CepT granulator.

Aspects and Implementation of Pharmaceutical Quality by Design.

The introduction of the Quality by Design concept in 2004 has brought a paradigm shift in the pharmaceutical industry as well as a new era in pharmaceutical research and development [...

QbD Approach-Based Preparation and Optimization of Hydrophobic Ion-Pairing Complex of Lysozyme with Sodium Dodecyl Sulphate to Enhance Stability in Lipid-Based Carriers.

Hydrophobic ion pairing (HIP) complexation was found to be an efficient approach in modulating the release and enhancing the stability and encapsulation of hydrophilic macromolecules such as proteins in hydrophobic nano/microcarriers. The present work strives to develop and optimize the preparation of the HIP complex of the antimicrobial enzyme lysozyme (LYZ) with the ion-pairing agent (IPA) sodium dodecyl sulphate (SDS) relying on the quality-by-design (QbD) approach. The quality target product profile (QTPP) includes the achievement of maximal lipophilicity in a reversible manner to enable the maintenance of biological activity.

Quality by Design-Guided Systematic Development and Optimization of Mucoadhesive Buccal Films.

Mucoadhesive buccal films have found increased popularity in pharmaceutical drug delivery due to the several advantages that they possess. The present study strives to develop and optimize chitosan-based mucoadhesive buccal films by relying on quality-by-design (QbD) principles. Previous knowledge and experience were employed to firstly identify the critical quality attributes (CQAs), followed by a thorough risk assessment, which led to the selection of seven critical material attributes and process parameters, namely, the polymer grade and concentration, the plasticizer type and concentration, the citric acid (CA) concentration, the amount of the casted solution, and the drying condition.

Formulation and characterization of pramipexole containing buccal films for using in Parkinson's disease.

Parkinson's disease (PD) is neurodegenerative chronic illness which affects primarily the elderly over 45 years of age. The symptoms can be various, both non-motor and motor symptoms can appear. The biggest problem in the treatment of the disease is the difficulty in swallowing for the patients.

Quality by Design-Based Development of Solid Self-Emulsifying Drug Delivery System (SEDDS) as a Potential Carrier for Oral Delivery of Lysozyme.

For many years, researchers have been making efforts to find a manufacturing technique, as well as a drug delivery system, that will allow for oral delivery of biopharmaceuticals to their target site of action without impairing their biological activity. Due to the positive in vivo outcomes of this formulation strategy, self-emulsifying drug delivery systems (SEDDSs) have been intensively studied in the last few years as a way of overcoming the different challenges associated with the oral delivery of macromolecules. The purpose of the present study was to examine the possibility of developing solid SEDDSs as potential carriers for the oral delivery of lysozyme (LYS) using the Quality by Design (QbD) concept.

Development and evaluation of bioadhesive buccal films based on sodium alginate for allergy therapy.

Buccal drug administration is a less explored area, therefore researchers and companies focus on its research because of its innovative potential and opportunities. Buccal polymer films (patches) are considered to be an innovative form and have a great number of advantageous properties. Firstly, patients who suffer from swallowing problems and children can also apply them.

Stability, Permeability and Cytotoxicity of Buccal Films in Allergy Treatment.

Oral mucoadhesive systems, such as polymer films, are among innovative pharmaceutical products. These systems can be applied in swallowing problems and can also be used in geriatrics and paediatrics. In our earlier work, we successfully formulated buccal mucoadhesive polymer films, which contained cetirizine-hydrochloride (CTZ) as the API.

Investigation of Surface Properties and Free Volumes of Chitosan-Based Buccal Mucoadhesive Drug Delivery Films Containing Ascorbic Acid.

Nowadays, the buccal administration of mucoadhesive films is very promising. Our aim was to prepare ascorbic acid-containing chitosan films to study the properties and structures important for applicability and optimize the composition. During the formulation of mucoadhesive films, chitosan as the polymer basis of the film was used.

Predicting Drug Release Rate of Implantable Matrices and Better Understanding of the Underlying Mechanisms through Experimental Design and Artificial Neural Network-Based Modelling.

There is a growing interest in implantable drug delivery systems (DDS) in pharmaceutical science. The aim of the present study is to investigate whether it is possible to customize drug release from implantable DDSs through drug-carrier interactions. Therefore, a series of chemically similar active ingredients (APIs) was mixed with different matrix-forming materials and was then compressed directly.

Optimization of layering technique and secondary structure analysis during the formulation of nanoparticles containing lysozyme by quality by design approach.

In our study, core-shell nanoparticles containing lysozyme were formulated with precipitation and layering self-assembly. Factorial design (DoE) was applied by setting the process parameters during the preparation with Quality by Design (QbD) approach. The factors were the concentration of lysozyme and sodium alginate, and pH.

Formulation and Optimization of Sodium Alginate Polymer Film as a Buccal Mucoadhesive Drug Delivery System Containing Cetirizine Dihydrochloride.

Currently, pharmaceutical companies are working on innovative methods, processes and products. Oral mucoadhesive systems, such as tablets, gels, and polymer films, are among these possible products. Oral mucoadhesive systems possess many advantages, including the possibility to be applied in swallowing problems.

Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films.

In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains.

Design and characterization of chitosan/citrate films as carrier for oral macromolecule delivery.

The oral delivery of biopharmaceuticals requires the including of absorption enhancer, protease inhibitor and a suitable carrier system. The aim of the present work was to formulate and characterize chitosan solutions/films incorporating citric acid (CA) as potential excipient in comparison to the well-known acetic acid (AA)-based films as a reference. Films were made by the solvent casting method with/without glycerol (G), propylene glycol (PG) and polyethylene glycol (PEG-400) as plasticizers.

Preparation and investigation of core-shell nanoparticles containing human interferon-α.

Sustained release of active interferon-α (IFN-α) has been achieved from core-shell nanoparticles (NPs) prepared by aqueous precipitation of IFN-α-enriched human serum albumin (HSA-IFN-α) and layer-by-layer (L-b-L) by coating of the IFN-α NPs with poly(sodium-4-styrene) sulphonate (PSS) and chitosan (Chit). The concentration and the pH of HSA solution were optimized during the development of this method. Dynamic light scattering (DLS), zeta-potential, thermal analysis (differential scanning calorimetry (DSC) and termogravimetry (TG)), X-ray diffraction (XRD), IFN-α activity and morphology (transmission electron microscope (TEM)) studies were used to control the preparation and analyse the products.

Process analytical technology (PAT) approach to the formulation of thermosensitive protein-loaded pellets: Multi-point monitoring of temperature in a high-shear pelletization.

In the literature there are some publications about the effect of impeller and chopper speeds on product parameters. However, there is no information about the effect of temperature. Therefore our main aim was the investigation of elevated temperature and temperature distribution during pelletization in a high shear granulator according to process analytical technology.

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product.

[Application of biosensors from the point of drug research].

With the increasing number of protein active agents produced by the biotechnological route, the suitable analytical methods will also be important. The detection of small changes of protein and the monitoring of the processes of the biotechnological procedure are important. Biosensors can be applied for the detection of very low concentrations with nearly 100% selectivity.

Effects of pharmaceutical processing on pepsin activity during the formulation of solid dosage forms.

The main aim of this study was to investigate the effects of pharmaceutical technological methods on pepsin activity during the formulation of solid dosage forms. The circumstances of direct compression and wet granulation were modeled. During direct compression, the heat and the compression force must be taken into consideration.

Effect of lubricant on spreading of coating liquid on surface of tablets containing pancreatin.

The objective of this study was to evaluate the spreading of the coating liquid on different tablets containing pancreatin and microcrystalline cellulose. The effects of the ratio of the components, the presence of magnesium stearate and the blending circumstances were investigated. The contact angle of the liquids on the different tablets did not change linearly.

Evaluation of the binding effect of human serum albumin on the properties of granules.

The main objective of this study was the application of a solution of human serum albumin as a granulating fluid. The properties of the granules formed were evaluated and compared with those when a conventional binder was applied in the same concentration. The powder mixture contained a soluble (mannitol) and an insoluble component (different types of cellulose).

[Formulation of an oral solid dosage form containing human interferon-alpha].

The main objective of this study was to process the human alpha-interferon for the solid dosage form. The first step was the preparation of the intermediate product for the tablet making. Fluid bed apparatus with top spray method was applied for the layering of powdered cellulose with human alpha-interferon solutions.

Formulation of an intermediate product from human serum albumin for the production of a solid dosage form.

The main objective of this study was to evaluate and to increase the processibility of a model protein (human serum albumin (HSA)) for preparation of an intermediate for a solid dosage form. The applicability of the solid forms is easier, and therefore their formulation is a promising method for the application of proteins. The layering of powdered cellulose with HSA solutions of different concentrations in a fluid bed apparatus with the top spray method was applied.