Toward On-Demand Polymorphic Transitions of Organic Crystals via Side Chain and Lattice Dynamics Engineering.

Controlling polymorphism, namely, the occurrence of multiple crystal forms for a given compound, is still an open technological challenge that needs to be addressed for the reliable manufacturing of crystalline functional materials. Here, we devised a series of 13 organic crystals engineered to embody molecular fragments undergoing specific nanoscale motion anticipated to drive cooperative order-disorder phase transitions. By combining polarized optical microscopy coupled with a heating/cooling stage, differential scanning calorimetry, X-ray diffraction, low-frequency Raman spectroscopy, and calculations (density functional theory and molecular dynamics), we proved the occurrence of cooperative transitions in all the crystalline systems, and we demonstrated how both the molecular structure and lattice dynamics play crucial roles in these peculiar solid-to-solid transformations.

Ferroelastic ionic organic crystals that self-heal to 95.

The realm of self-healing materials integrates chemical and physical mechanisms that prevent wear and fracturing and extend the operational lifetime. Unlike the favorable rheology of amorphous soft materials that facilitates efficient contact between fragments, the efficiency of recovery of atomistically ordered materials is restricted by slower interfacial mass transport and the need for ideal physical alignment, which limits their real-world application. We report drastic enhancements in efficiency and recovery time in the self-healing of anilinium bromide, challenging these limitations.

Smart dynamic hybrid membranes with self-cleaning capability.

The growing freshwater scarcity has caused increased use of membrane desalination of seawater as a relatively sustainable technology that promises to provide long-term solution for the increasingly water-stressed world. However, the currently used membranes for desalination on an industrial scale are inevitably prone to fouling that results in decreased flux and necessity for periodic chemical cleaning, and incur unacceptably high energy cost while also leaving an environmental footprint with unforeseeable long-term consequences. This extant problem requires an immediate shift to smart separation approaches with self-cleaning capability for enhanced efficiency and prolonged operational lifetime.

Mechanical properties and peculiarities of molecular crystals.

In the last century, molecular crystals functioned predominantly as a means for determining the molecular structures X-ray diffraction, albeit as the century came to a close the response of molecular crystals to electric, magnetic, and light fields revealed that the physical properties of molecular crystals were as rich as the diversity of molecules themselves. In this century, the mechanical properties of molecular crystals have continued to enhance our understanding of the colligative responses of weakly bound molecules to internal frustration and applied forces. Here, the authors review the main themes of research that have developed in recent decades, prefaced by an overview of the particular considerations that distinguish molecular crystals from traditional materials such as metals and ceramics.

The Elusive Structure of Levocetirizine Dihydrochloride Determined by Electron Diffraction.

Levocetirizine is an orally administrated, second-generation antihistaminic active pharmaceutical ingredient that has been used to treat symptoms of allergy and long-term hives for over 25 years. Despite the wide use of this compound, its crystal structure has remained unknown. Here we report the application of 3D electron diffraction (3D ED)/Micro-crystal electron diffraction (MicroED) to determine the crystal structure of Levocetirizine dihydrochloride directly from crystalline powders that were extracted from commercially available tablets containing the compound.

Autonomous Reconstitution of Fractured Hybrid Perovskite Single Crystals.

The outstanding performance and facile processability turn hybrid organic-inorganic perovskites into one of the most sought-after classes of semiconducting materials for optoelectronics. Yet, their translation into real-world applications necessitates that challenges with their chemical stability and poor mechanical robustness are first addressed. Here, centimeter-size single crystals of methylammoniumlead(II) iodide (MAPbI ) are reported to be capable of autonomous self-healing under minimal compression at ambient temperature.

Global Analysis of the Mechanical Properties of Organic Crystals.

Organic crystals, although widely studied, have not been considered nascent candidate materials in engineering design. Here we summarize the mechanical properties of organic crystals that have been reported over the past three decades, and we establish a global mechanical property profile that can be used to predict and identify mechanically robust organic crystals. Being composed of light elements, organic crystals populate a narrow region in the mechanical property-density space between soft, disordered organic materials and stiff, ordered materials.

Multifunctional Deformable Organic Semiconductor Single Crystals.

We report the first organic semiconductor crystal with a unique combination of properties that can be used as a multifunctional optoelectronic device. Mechanically flexible single crystals of 9,10-bis(phenylethynyl)anthracene (BPEA) can function as a phototransistor, photoswitch, and an optical waveguide. The material can exist as two structurally different solid phases, with single crystals of one of the phases being elastic at room temperature while those of the other are brittle and become plastic at higher temperature.

Mechanically robust amino acid crystals as fiber-optic transducers and wide bandpass filters for optical communication in the near-infrared.

Organic crystals are emerging as mechanically compliant, light-weight and chemically versatile alternatives to the commonly used silica and polymer waveguides. However, the previously reported organic crystals were shown to be able to transmit visible light, whereas actual implementation in telecommunication devices requires transparency in the near-infrared spectral range. Here we demonstrate that single crystals of the amino acid L-threonine could be used as optical waveguides and filters with high mechanical and thermal robustness for transduction of signals in the telecommunications range.

Cracking under Internal Pressure: Photodynamic Behavior of Vinyl Azide Crystals through N Release.

When exposed to UV light, single crystals of the vinyl azides 3-azido-1-phenylpropenone (), 3-azido-1-(4-methoxyphenyl)propenone (), and 3-azido-1-(4-chlorophenyl)propenone () exhibit dramatic mechanical effects by cracking or bending with the release of N. Mechanistic studies using laser flash photolysis, supported by quantum mechanical calculations, show that each of the vinyl azides degrades through a vinylnitrene intermediate. However, despite having very similar crystal packing motifs, the three compounds exhibit distinct photomechanical responses in bulk crystals.

The Rise of the Dynamic Crystals.

The anticipated shift in the focal point of interest of solid-state chemists, crystal engineers, and crystallographers from structure to properties to function parallels the need to apply our accumulated understanding of the intricacies of crystal structure to explaining the related properties, with the ultimate goal of harnessing that knowledge in applications that require soft, lightweight, or biocompatible organic solids. In these developments, the adaptive molecular crystals warrant particular attention as an alternative choice of materials for light, flexible, and environmentally benign devices, primarily memories, capacitors, sensors, and actuators. Some of the outstanding requirements for the application of these dynamic materials as high-efficiency energy-storage devices are strongly induced polarization, a high switching field, and narrow hysteresis in the case of reversible dynamic processes.

Mechanically Assisted Bioluminescence with Natural Luciferase.

Mechanochemical analogues have recently been established for several enzymatic reactions, but they require periodic interruption of the reaction for sampling, dissolution, and (bio)chemical analysis to monitor their progress. By applying a mechanochemical procedure to induce bioluminescence analogous to that used by the marine ostracod Cypridina (Vargula) hilgendorfii, here we demonstrate that the light emitted by a bioluminescent reaction can be used to directly monitor the progress of a mechanoenzymatic reaction without sampling. Mechanical treatment of Cypridina luciferase with luciferin generates bright blue light which can be readily detected and analyzed spectroscopically.

From Mechanical Effects to Mechanochemistry: Softening and Depression of the Melting Point of Deformed Plastic Crystals.

The melting of any pure crystalline material at constant pressure is one of its most fundamental properties, and it has been used to identify organic compounds or to verify their chemical or phase purity since the early times of chemistry. Here, we report that a mechanical deformation of plastic organic single crystals such as bending results in a small yet significant decrease in their melting point of about 0.3-0.

Micromanipulation of Mechanically Compliant Organic Single-Crystal Optical Microwaveguides.

Flexible organic single crystals are evolving as new materials for optical waveguides that can be used for transfer of information in organic optoelectronic microcircuits. Integration in microelectronics of such crystalline waveguides requires downsizing and precise spatial control over their shape and size at the microscale, however that currently is not possible due to difficulties with manipulation of these small, brittle objects that are prone to cracking and disintegration. Here we demonstrate that atomic force microscopy (AFM) can be used to reshape, resize and relocate single-crystal microwaveguides in order to attain spatial control over their light output.

Efficiently self-healing boronic ester crystals.

The perception of organic crystals being rigid static entities is quickly eroding, and molecular crystals are now matching a number of properties previously thought to be unique to soft materials. Here, we present crystals of a boronate ester that encompass many of the elastic and plastic mechanical properties of polymers such as bending, twisting, coiling and highly efficient self-healing of up to 67%, while they maintain their long-range structural order. The approach utilizes the concept of dynamic covalent chemistry and proves it can be applied towards ordered materials.

Extraordinary anisotropic thermal expansion in photosalient crystals.

Although a plethora of metal complexes have been characterized, those having multifunctional properties are very rare. This article reports three isotypical complexes, namely [Cu(benzoate) ], where = 4-styryl-pyridine (4spy) (), 2'-fluoro-4-styryl-pyridine (2F-4spy) () and 3'-fluoro-4-styryl-pyridine (3F-4spy) (), which show photosalient behavior (photoinduced crystal mobility) while they undergo [2+2] cyclo-addition. These crystals also exhibit anisotropic thermal expansion when heated from room temperature to 200°C.

Global Performance Indices for Dynamic Crystals as Organic Thermal Actuators.

Crystal adaptronics is an emergent materials science discipline at the intersection of solid-state chemistry and mechanical engineering that explores the dynamic nature of mechanically reconfigurable, motile, and explosive crystals. Adaptive molecular crystals bring to materials science a qualitatively new set of properties that associate long-range structural order with softness and mechanical compliance. However, the full potential of this class of materials remains underexplored and they have not been considered as materials of choice in an engineer's toolbox.

Mechanically Responsive Crystals: Analysis of Macroscopic Strain Reveals "Hidden" Processes.

Mechanical response of single crystals to light, temperature, and/or force-an emerging platform for the development of new organic actuating materials for soft robotics-has recently been quantitatively described by a general and robust mathematical model ( . 2015 , 115 , 12440 - 12490 ). The model can be used to extract accurate activation energies and kinetics of solid-state chemical reactions simply by tracking the time-dependent bending of the crystal.

Efficient Screening for Ternary Molecular Ionic Cocrystals Using a Complementary Mechanosynthesis and Computational Structure Prediction Approach.

The discovery of molecular ionic cocrystals (ICCs) of active pharmaceutical ingredients (APIs) widens the opportunities for optimizing the physicochemical properties of APIs whilst facilitating the delivery of multiple therapeutic agents. However, ICCs are often observed serendipitously in crystallization screens and the factors dictating their crystallization are poorly understood. We demonstrate here that mechanochemical ball milling is a versatile technique for the reproducible synthesis of ternary molecular ICCs in less than 30 min of grinding with or without solvent.

Martensitic organic crystals as soft actuators.

Being capable of rapid and complete structure switching, the martensitic phase transitions in molecular crystals are thought to hold a tremendous potential as thermally driven organic actuators. However, the mechanical engineering parlance in the assessment of their performance is not immediately legible to the chemistry research community that starts to explore these materials, and the unavailability of performance indices has precluded molecular crystals from being considered in the device design process. Here, we demonstrate that an organic martensite, hexamethylbenzene, can be used to perform work that is comparable to that of most actuator classes.

Spatial Photocontrol of the Optical Output from an Organic Crystal Waveguide.

The versatility in mechanical properties and the capability of optical waveguiding of molecular crystals have attracted research on the potential application of these materials in optomechanical transduction. Here, we demonstrate spatial photocontrol over the optical output from slender single crystals of an azo compound, 3',4'-dimethyl-4-(dimethylamino)azobenzene that can be used as a crystalline optical waveguide. The position of the free end of a single crystal can be controlled through reversible photoswitching between the and isomers at the irradiated crystal surface.

Shape-memory effects in molecular crystals.

Molecular crystals can be bent elastically by expansion or plastically by delamination into slabs that glide along slip planes. Here we report that upon bending, terephthalic acid crystals can undergo a mechanically induced phase transition without delamination and their overall crystal integrity is retained. Such plastically bent crystals act as bimorphs and their phase uniformity can be recovered thermally by taking the crystal over the phase transition temperature.