Design of Hardware Accelerators for Optimized and Quantized Neural Networks to Detect Atrial Fibrillation in Patch ECG Device with RISC-V.

Atrial Fibrillation (AF) is one of the most common heart arrhythmias. It is known to cause up to 15% of all strokes. In current times, modern detection systems for arrhythmias, such as single-use patch electrocardiogram (ECG) devices, have to be energy efficient, small, and affordable.

Light transmittance by a multi-coloured zirconia material.

Full-contour zirconia restorations are gaining in popularity. Highly translucent zirconia materials and multi-coloured zirconia blocks might help to overcome the aesthetic drawbacks of traditional zirconia. This study evaluated the transmittance of visible light (400-700 nm) through the four different layers (Enamel Layer EL, Transition Layer 1 TL1, Transition Layer 2 TL2, Body Layer BL) of a multi-coloured zirconia block (KATANA™ Zirconia Multi-Layered Disc (ML)) using a spectrophotometer.

Fracture load of different crown systems on zirconia implant abutments.

Objectives: The purpose of this study was to evaluate the fracture load of single zirconia abutment restorations using different veneering techniques and materials.

Materials And Methods: The abutment restorations were divided into 6 groups with 20 samples each: test abutments (control group A), lithium disilicate ceramic crowns bonded on incisor abutments (group B), leucite ceramic crowns bonded on incisor abutments (group C), premolar abutments directly veneered with a fluor apatite ceramic (group D (layered) and group E (pressed)) and premolar abutments bonded with lithium disilicate ceramic crowns (group F). The fracture load of the restorations was evaluated using a universal testing machine.

Microstructure analysis of dental castings used in fixed dental prostheses--a simple method for quality control.

The aim of this study was to evaluate the microstructural quality of noble alloy castings from commercial dental laboratories using the wiping-etching method as a simple method for quality control. In total, 240 castings from two noble alloys (AuAgCuPt and AuPtZn) were taken from a day's production of five different dental laboratories. The casting quality was evaluated by determining the grain size and by assessing the number and size of shrinkage cavities after acidic etching of the alloy surfaces.

Phenomena and mechanisms of crack propagation in glass-ceramics.

Lithium disilicate, leucite and apatite glass-ceramics have become state-of-the-art framework materials in the fabrication of all-ceramic dental restorative materials. The goal of this study was to examine the crack propagation behaviour of these three known glass-ceramic materials after they have been subjected to Vickers indentation and to characterize their crack opening profiles (delta(meas) vs. (a-r)).

Ceramics as biomaterials for dental restoration.

Sintered ceramics and glass-ceramics are widely used as biomaterials for dental restoration, especially as dental inlays, onlays, veneers, crowns or bridges. Biomaterials were developed either to veneer metal frameworks or to produce metal-free dental restorations. Different types of glass-ceramics and ceramics are available and necessary today to fulfill customers' needs (patients, dentists and dental technicians) regarding the properties of the biomaterials and the processing of the products.

High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings--a new fabrication mode for all-ceramic restorations.

Objectives: With this in vitro study the fracture strength of zirconia-based crown copings being veneered with a CAD/CAM generated high-strength ceramic cap by sintering is compared with anatomically identical zirconia-based crowns, which were either overpressed or veneered by the layering technique for completion.

Methods: A 1.2mm, 360 degrees chamfer preparation was performed on a second maxillary molar and was dublicated 15 times in a cobalt-chromium-alloy.

Body composition and heat expenditure in broiler chickens fed diets with or without trans fatty acids.

The effect of a diet containing trans fatty acids (TFA) on the fatty acid composition and fat accumulation was investigated in broiler chickens. Female broilers were fed a control or a TFA-containing diet. The difference between the diets was that a part of cis 18:1 in the control diet was replaced by the TFA.

Materials. Consensus report of Working Group 4.

The method used by the working group was an iterative process based upon a structured review of the relevant literature by a group of rapporteurs. The literature was searched using common databanks (e.g.

Effect of dietary conjugated linoleic acid on body composition and energy balance in broiler chickens.

The effect of dietary conjugated linoleic acid (CLA) on body composition and energy metabolism was investigated in broiler chickens. Male broiler chicks were assigned to receive either a control diet (1 % sunflower oil) or a diet containing CLA (1 % of a 1:1 mixture of trans-10, cis-12 and cis-9, trans-11 isomers of octadecadienoic acid). The diets were fed ad libitum for 3 weeks and there were eight replicates per diet, each replicate including four chickens so that each treatment had thirty-two animals.

Corrosion resistance measurements of dental alloys, are they correlated?

Objectives: The aim was to assess in vitro the resistance to corrosion of eight commercial dental alloys by two quantitative methods, electrochemical and immersion tests, then to statistically test the hypothesis of possible correlation between the polarization resistance (R(p)) and the elemental release.

Methods: Two quantitative methods; electrochemical and immersion test, were used. From the first, after recording the OCP during 24h immersion in acidified artificial saliva (pH 2.

[In vitro fracture resistance tests of 3-unit posterior bridges produced by the Procera process].

The aim of this investigation was to evaluate the fracture resistance of three-unit fixed partial dentures manufactured with the Procera-System in vitro. Metal abutments representing the teeth 25 and 27 were prepared with a 90 degrees circumferential internally rounded shoulder. The abutments were duplicated with polyvinysiloxane, and master dies were fabricated.

Effects of dietary essential oil components on growth performance, digestive enzymes and lipid metabolism in female broiler chickens.

1. The present experiment was conducted to describe the effects of thymol, cinnamaldehyde and a commercial preparation of essential oil components (CRINA Poultry), in female broilers. Feed and water were provided for ad libitum consumption.

Plasma lipid concentrations, macronutrient digestibility and mineral absorption in dogs fed a dry food containing medium-chain triglycerides.

In a cross-over trial with feeding periods of 2 weeks, six healthy dogs were fed a dry food with a total fat content of 13.4% and containing either 5% (w/w) corn oil (11% of dietary metabolizable energy) or an isoenergetic amount of medium-chain triglycerides (MCT). The two diets were supplied on a restricted basis.

Faecal bacterial profile, nitrogen excretion and mineral absorption in healthy dogs fed supplemental oligofructose.

In a cross-over trial, five healthy dogs were fed a dry food without or with 1% (w/w) oligofructose to assess any oligofructose-induced effects on the faecal bacterial profile, nitrogen excretion and mineral absorption. The diets were given for a period of 3 weeks. Oligofructose feeding significantly raised the number of Bifidobacteria, Streptococci and Clostridia in faeces.

Corrosion susceptibility of lingual wire extensions in removable appliances. An in vitro study.

Material And Methods: The corrosion resistance of ten different round orthodontic wires as plastic-encased extensions was evaluated in vitro. Following the production of defined test samples with free as well as with acrylic-embedded wire segments, ten samples of each product were subjected to gap provocation by deflecting the free-running wire ends with an electric drive, while 10 samples remained provocation-free. The tests were run under standardized conditions (7 days, 37 degrees C, pH 2.

Effect of acetic acid consumption on clinical laboratory values in the dog.

To investigate the influence of food enriched with acetic acid on the clinical, biochemical, electrolyte, blood gas, haematological and urinary variables in the dog, a cross-over study was carried out with periods of approximately 2 weeks involving six healthy, adult dogs. Another objective was to determine the maximum concentration of acetic acid that the dogs found to be palatable. The dogs were maintained on a commercial meat-based food with added acetic acid and/or glucose.

Dietary lactulose decreases apparent nitrogen absorption and increases apparent calcium and magnesium absorption in healthy dogs.

To study the effect of lactulose on the route of nitrogen excretion, we fed six healthy, adult dogs on diets containing either 0, 1 or 3 g lactulose/MJ metabolizable energy according to a 3 x 3 Latin square design. The results were analysed to identify statistically significant linear trend effects of lactulose. Faecal pH was significantly lowered by lactulose.

Consumption of fructooligosaccharides and nitrogen excretion in cats.

In a cross-over study with adult cats the effect on nitrogen (N) excretion of a diet supplemented with fructooligosaccharides (FOS) was compared with a diet supplemented with an equal amount of fructose and glucose. FOS raised N excretion with faeces by 26% (P < 0.05) and non-significantly lowered N excretion with urine by 5%.

Contribution to the biological assessment of orthodontic acrylic materials. Measurement of their residual monomer output and cytotoxicity.

The acrylic materials used in orthodontics for the fabrication of removable appliances are subjected in the oral cavity to processes of change which influence their physical, mechanical and biological properties. It is therefore essential that every newly developed material must be judged in terms of its clinical value. In the present study, 2 orthodontic cold-cure acrylics, Orthocryl and Forestacryl, and 4 orthodontic photocure acrylics, Triad, Wil-O-Dont, Odontolux and Lux-A-Tech, were investigated and compared with 2 prosthetic acrylic materials: the cold-cure acrylic Palapress and the hot-cure acrylic Paladon.

Transcutaneous electrical nerve stimulation (TENS): its short-term and long-term effects on the masticatory muscles.

In an electromyographic study on subjects with no functional disturbances of the masticatory muscles, the duration of the post-therapeutic effects of transcutaneous electrical nerve stimulation (= TENS) on the superficial masseter and anterior temporal muscle was analyzed. The myoelectric signals were registered from 20 healthy volunteers in 3 different mandibular positions. The recordings were performed before a 20-minute TENS application with the J-4 Myomonitor and continued with a sequence of follow-up registrations with increasing interval to the initial stimulation.

In vitro investigation into the biological assessment of orthodontic wires.

The alloys used in orthodontics are subject in the moist environment of the oral cavity to various corrosion processes. If the products of the corrosion are introduced into a biological system they may cause changes. In the present investigation the corrosion rate of 23 different orthodontic wires (preformed arch wires and straight wires) made from 5 different alloys were examined in a nutrient medium by ICP-AES analysis, and the influence of the corrosion products on the cytotoxicity of a fibroblast culture was investigated using Mosmann's MTT test.

A study of different calcification areas in newly formed bone 8 weeks after insertion of dental implants in rabbit tibias.

In orofacial implantology there are many types of implants for the different systems. Among these is the implant surface type, e.g.

Technical and biophysical aspects in prosthetic occlusal rehabilitation for edentulous teenagers.

The loss of anterior teeth may be transient solved by temporary adhesive bridges (Oslo bridge, Rochette, Ellmann, Neumann, Tschemitscheck, Armatron systems). Provisional crowns and bridges could be used for Brackets fixing. Anterior bridge with subocclusal connector permits transversal expansion.

[Muscle relaxation by transcutaneous electric nerve stimulation (TENS) in bruxism. An electromyographic study].

In recent years transcutaneous electrical neuromuscular stimulation (TENS) has become increasingly more common in the treatment of functional diseases of the masticatory muscles and currently the practitioner can choose among a variety of stimulators. In an electromyographic study of 17 adults suffering from nocturnal bruxism and of a control group consisting of 18 adults without any functional disturbances of the masticatory muscles, the effect of this kind of neuromuscular stimulation on the temporal and masseter muscle was examined. The myoelectric signals were registered before and after TENS treatment in 3 different positions of the mandible.