Fibroblast alignment and matrix remodeling induced by a stiffness gradient in a skin-derived extracellular matrix hydrogel.

Large skin injuries heal as scars. Stiffness gradually increases from normal skin to scar tissue (20x higher), due to excessive deposition and crosslinking of extracellular matrix (ECM) mostly produced by (myo)fibroblasts. Using a custom mold, skin-derived ECM hydrogels (dECM) were UV crosslinked after diffusion of ruthenium (Ru) to produce a Ru-dECM gradient hydrogel.

Tribology of Pore-Textured Hard Surfaces under Physiological Conditions: Effects of Texture Scales.

Micro- and nanotexturing on hard biomaterials have shown advantages for tissue engineering and antifouling applications. However, a growing number of studies have also shown that texturing may cause an increase in friction, demanding further research on the tribological effects of texturing under physiological conditions. This study investigates the tribological effects of micro- and nanopore patterns on hard hydrophilic silicon sliding against soft hydrophobic polydimethylsiloxane (PDMS) immersed in aqueous liquids with various viscosities, simulating the sliding of a textured implant surface against soft tissues.

Differential roles for lysyl oxidase (like), family members in chronic obstructive pulmonary disease; from gene and protein expression to function.

Chronic obstructive pulmonary disease (COPD) is characterized by long-term airflow obstruction with cigarette smoke as a key risk factor. Extracellular matrix (ECM) alterations in COPD may lead to small airway wall fibrosis. Altered collagen cross-linking, potentially mediated by the lysyl oxidase (LO) family of enzymes (LOX, LOXL1-4), orchestrates disturbed ECM homeostasis.

Coupling of photocatalysis and catalysis using an optical fiber textile for room temperature depollution.

Herein, we investigate the interplay between a photocatalyst (TiO) and a catalyst (Pt/TiO and Pt/CeO) for the oxidation of formaldehyde and toluene at room temperature. A luminous textile is used as support and as light source for the photocatalyst. Our results indicate that the presence of the catalyst and the photocatalyst increases the catalytic performance for the oxidation of formaldehyde, while the photocatalytic performance for toluene oxidation decreases.

Brownmillerites CaFeO and SrFeO as Catalyst Support for CO Oxidation.

The support material can play an important role in oxidation catalysis, notably for CO oxidation. Here, we study two materials of the Brownmillerite family, CaFeO and SrFeO, as one example of a stoichiometric phase (CaFeO CFO) and one existing in different modifications (SrFeO, SrFeO and SrFeO, SFO). The two materials are synthesized using two synthesis methods, one bottom-up approach via a complexation route and one top-down method (electric arc fusion), allowing to study the impact of the specific surface area on the oxygen mobility and catalytic performance.

Lectin-Functionalized Polyethylene Glycol for Relief of Mucosal Dryness.

The importance of lubrication between oral surfaces provided by the salivary film is most acutely apparent when it is disrupted, a prevalent consequence of salivary gland hypofunction experienced with aging, a symptom of certain diseases, or a side effect of some medical interventions. Sufferers report difficulty with speech and oral food processing and collectively is detrimental to quality of life. Polyethylene glycol (PEG) is widely employed as a successful biocompatible boundary lubricant in engineering and biomedical applications.

Tribological Properties of Micropored Poly(2-hydroxyethyl methacrylate) Hydrogels in a Biomimetic Aqueous Environment.

The applications of hydrogels in tissue engineering as implants have rapidly grown in the last decade. However, the tribological properties of hydrogels under physiologically relevant conditions, especially those of textured hydrogels, have remained largely unknown due to the complexity of their mechanical and chemical properties. In this study, we experimentally investigated the tribological properties of micopored poly(2-hydroxyethyl methacrylate) (pHEMA) with the lateral pore dimensions varied compared to untextured pHEMA, the most commonly used hydrogel in ophthalmology, under physiologically relevant conditions.

Understanding Oxygen Release from Nanoporous Perovskite Oxides and Its Effect on the Catalytic Oxidation of CH and CO.

The design of nanoporous perovskite oxides is considered an efficient strategy to develop performing, sustainable catalysts for the conversion of methane. The dependency of nanoporosity on the oxygen defect chemistry and the catalytic activity of perovskite oxides toward CH and CO oxidation was studied here. A novel colloidal synthesis route for nanoporous, high-temperature stable SrTiFeO with specific surface areas (SSA) ranging from 45 to 80 m/g and pore sizes from 10 to 100 nm was developed.

Cartilage lamina splendens inspired nanostructured coating for biomaterial lubrication.

Biomaterials that are used in biological systems, such as polycarbonate urethane (PCU) knee joint implants and contact lenses, generally lack lubrication. This limits their integration with the body and impedes their function. Here, we propose a nanostructured film based on hydrophilic polysaccharide hyaluronic acid conjugated with dopamine (HADN) and zwitterionic reduced glutathione (Glu), which forms a composite coating (HADN-Glu) to enhance the lubrication between cartilage and PCU.

Synergy between Metallic and Oxidized Pt Sites Unravelled during Room Temperature CO Oxidation on Pt/Ceria.

Pt-based materials are widely used as heterogeneous catalysts, in particular for pollutant removal applications. The state of Pt has often been proposed to differ depending on experimental conditions, for example, metallic Pt poisoned with CO being present at lower temperature before light-off, while an oxidized Pt surface prevails above light-off temperature. In stark contrast to all previous reports, we show herein that both metallic and oxidized Pt are present in similar proportions under reaction conditions at the surface of ca.

Role of endothelial glycocalyx in sliding friction at the catheter-blood vessel interface.

Catheterization is a common medical operation to diagnose and treat cardiovascular diseases. The blood vessel lumen is coated with endothelial glycocalyx layer (EGL), which is important for the permeability and diffusion through the blood vessels wall, blood hemodynamics and mechanotransduction. However EGL's role in catheter-blood vessel friction is not explored.

Correction to: Dry mouth: saliva substitutes which adsorb and modify existing salivary condition films improve oral lubrication.

After publication of this paper, the authors observed that that figure 6 appears before figure 5.

A bioinspired mucoadhesive restores lubrication of degraded cartilage through reestablishment of lamina splendens.

Adsorbed lubricious films composed of biomacromolecules are natively present at all articulating interfaces in the human body where they provide ultralow friction and maintain normal physiological function. Biolubrication gets impaired due to diseases such as osteoarthritis, in which cartilage damage results from alterations in synovial fluid and lamina splendens composition. Osteoarthritis is treated with hyaluronic acid (HA) orally or via intra-articular injection, but due to the poor adsorption of HA on the cartilage surface in the absence of adhesive molecules, pain relief is temporary.

Nanostructured Coating for Biomaterial Lubrication through Biomacromolecular Recruitment.

Biomaterials employed in the articular joint cavity, such as polycarbonate urethane (PCU) for meniscus replacement, lack of lubrication ability, leading to pain and tissue degradation. We present a nanostructured adhesive coating based on dopamine-modified hyaluronan (HADN) and poly-lysine (PLL), which can reestablish boundary lubrication between the cartilage and biomaterial. Lubrication restoration takes place without the need of exogenous lubricious molecules but through a novel strategy of recruitment of native lubricious molecules present in the surrounding milieu.

Dry mouth: saliva substitutes which adsorb and modify existing salivary condition films improve oral lubrication.

Objectives: The aims of this study are to assess different saliva substitutes for their efficacy to lubricate the oral cavity, and to relate this oral lubrication to the ability of saliva substitutes to adsorb on and change the structure of the existing salivary conditioning film (SCF).

Materials And Methods: Quartz crystal microbalance with dissipation was used to study the capability of saliva substitutes to interact with natural SCF and the ability to change the secondary SCF (S-SCF). A tongue-enamel friction system mimicking xerostomic conditions was used to assess the relief and relief period expected from these substitutes under set circumstances.

Tribological properties of microporous polydimethylsiloxane (PDMS) surfaces under physiological conditions.

Textured biomaterials have been extensively used in biomedical engineering to modulate mammalian and bacterial cell adhesion and proliferation, implant integration with human body and infection prevention. However, the tribological implications of texturing under wet physiological conditions have not been well quantified. This study aimed to characterize the tribological properties of micropore-textured polydimethylsiloxane (PDMS) under physiological conditions and investigate the effect of adsorbed lubricious molecules on friction.

An ex vivo salivary lubrication system to mimic xerostomic conditions and to predict the lubricating properties of xerostomia relieving agents.

Advances in medical research has resulted in successful treatment of many life-threatening infectious diseases as well as autoimmune and lifestyle-related diseases, increasing life-expectancy of both the developed and developing world. As a result of a growing ageing population, the focus has also turned on chronic diseases which seriously affect the quality of older patient life. Xerostomia (dry mouth) is one such condition, which leads to bad oral health and difficulty in consumption of dry foods and speech.

Notochordal cell matrix as a bioactive lubricant for the osteoarthritic joint.

Notochordal cell derived matrix (NCM) can induce regenerative effects on nucleus pulposus cells and may exert such effects on chondrocytes as well. Furthermore, when dissolved at low concentrations, NCM forms a viscous fluid with potential lubricating properties. Therefore, this study tests the feasibility of the use of NCM as a regenerative lubricant for the osteoarthritic joint.

An in vitro study of cartilage-meniscus tribology to understand the changes caused by a meniscus implant.

Active lifestyles increase the risk of meniscal injury. A permanent meniscus implant of polycarbonate urethane (PCU) is a promising treatment to postpone/prevent total knee arthroplasty. Study of the changes in articular cartilage tribology in the presence of PCU is essential in developing the optimum meniscus implant.

Ionic liquid- and surfactant-controlled crystallization of WO3 films.

WO3 films were obtained via evaporation-induced self-assembly (EISA) using ionic surfactants such as long-chain ionic liquids 1-hexadecyl-3-methyl imidazolium chloride and bromide (C16mimCl and C16mimBr, respectively) and cetyltrimethylammonium chloride and bromide (CTAC and CTAB, respectively) as additives. Owing to the presence of the ionic surfactants, WO3 films crystallize in a preferred orientation along the a-axis on different substrates, as evidenced by X-ray diffraction. WO3 films with this orientation show improved electrochromic properties when compared to films with a lower degree of crystallographic orientation, prepared in an analogue fashion.

Nanoscopic vibrations of bacteria with different cell-wall properties adhering to surfaces under flow and static conditions.

Bacteria adhering to surfaces demonstrate random, nanoscopic vibrations around their equilibrium positions. This paper compares vibrational amplitudes of bacteria adhering to glass. Spring constants of the bond are derived from vibrational amplitudes and related to the electrophoretic softness of the cell surfaces and dissipation shifts measured upon bacterial adhesion in a quartz-crystal-microbalance (QCM-D).