Quantitative study of early-stage transient bacterial adhesion to bioactive glass and glass ceramics: atomic force microscopic observations.

Antimicrobial potential of bioactive glass (BAG) makes it promising for implant applications, specifically overcoming the toxicity concerns associated with traditional antibacterial nanoparticles. The 58S composition of BAG (with high Ca and absence of Na) has been known to exhibit excellent bioactivity and antibacterial behaviour, but the mechanisms behind have not been investigated in detail. In this pioneering study, we are using Atomic Force Microscopy (AFM) to gain insights into 58S BAG's adhesive interactions with planktonic cells of both gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria; along with the impact of crystallinity on antibacterial properties.

Fabrication and characterization of multi-layered coaxial agar-based electrospun biocomposite mat, novel replacement for transdermal patches.

In the performed study, a novel fabrication of agar-based nanofibers was electrospun in an asymmetric bilayer dressing for biomedical transdermal patches. The optimal parameters for the fabrication of agar-based nanofibers after optimization were a feed rate of 10 μL/min, a 7 cm collector-to-nozzle distance, a 15 kV applied voltage, and a 700-rpm rotating collector speed. Coaxial nanofibers, as a second asymmetric layer, were produced using polyvinyl alcohol (PVA) with cephalexin hydrate, an antibacterial drug, as the core and agar-PCL as the sheath.

Multifunctional 58S Bioactive Glass/Silver/Cerium Oxide-Based Biocomposites with Effective Antibacterial, Cytocompatibility, and Mechanical Properties.

58S bioactive glass (BG) has effective biocompatibility and bioresorbable properties for bone tissue engineering; however, it has limitations regarding antibacterial, antioxidant, and mechanical properties. Therefore, we have developed BG biocomposites by reinforcing 58S BG with silver and ceria nanoparticles, which showed effective bactericidal properties by forming inhibited zones of 2.13 mm (against ) and 1.

3D-Printed Multifunctional Ag/CeO/ZnO Reinforced Hydroxyapatite-Based Scaffolds with Effective Antibacterial and Mechanical Properties.

Conventional three-dimensional (3D)-printed hydroxyapatite (HA)-based constructs have limited utility in bone tissue engineering due to their poor mechanical properties, elevated risk of microbial infection, and limited pore interconnectivity. 3D printing of complex multiple components to fabricate fully interconnected scaffolds is a challenging task; here, in this work, we have developed a procedure for fabrication of printable ink for complex systems containing multinanomaterials, i.e.

Multi-length scale strengthening and cytocompatibility of ultra high molecular weight polyethylene bio-composites by functionalized carbon nanotube and hydroxyapatite reinforcement.

The mechanical properties, such as hardness and elastic modulus, of ultra-high molecular weight polyethylene (UHMWPE) composites for acetabular cup liner are improved by adding hydroxyapatite (HAp) and carbon nanotubes (CNT). However, the weak adhesion of HAp (H) and CNT (C) with UHMWPE (U) limits the enhancement of mechanical properties. Thus, the surface of these reinforcements is silane-treated to improve the adhesion with polymer via Si-O and C=O bonds, as evidenced from spectroscopy techniques.

Contact stress and sliding wear damage tolerance of hydroxyapatite and carbon nanotube reinforced polyethylene cup liner against zirconia femoral head.

A finite element modeling (FEM) approach is carried out to estimate the contact stresses such as von-Mises and shear stress on the acetabular cup liner, made up of ultra-high molecular weight polyethylene (UHMWPE)-hydroxyapatite (HAp)-carbon nanotubes (CNT) based composites. The highlights of this work include the effects of liners' material (UHMWPE-HAp-CNT composites), radial clearance (0.05 to 1 mm), and liners' wall thickness (3 to 8 mm) on contact stresses.

Multifunctional Hydroxyapatite Composites for Orthopedic Applications: A Review.

Being a bioactive material, hydroxyapatite (HAp) is regarded as one of the most attractive ceramic biomaterials for bone and hard-tissue replacement and regeneration. Despite its substantial biocompatibility, osteoconductivity, and compositional similarity to that of bone, the employment of HAp is still limited in orthopedic applications due to its poor mechanical (low fracture toughness and bending strength) and antibacterial properties. These significant challenges lead to the notion of developing novel HAp-based composites via different fabrication routes.

The analysis of charge transport mechanism in mixed ionic electronic conductor composite of SrTiCoOdouble perovskite with yttria stabilized zirconia.

In this investigation, the ionic conduction mechanism in mixed ionic electronic conductors composites of SrTiCoO/YSZ has been studied with the help of universal dynamic response. 3 mol% and 8 mol% yttria stabilized ZrOhave been mixed with SrTiCoO(STC) double perovskite in 1:1 ratio to prepare STC/3YSZ and STC/8YSZ composites via solid-state reaction route. AC Impedance spectroscopy has been carried out to examine the charge transport mechanism, which has been modeled using the microstructural networks of resistors and capacitors.

Adhesin Protein Interaction of Bacteria with Various Biomaterial Surfaces.

The primary stage of adhesion during implant infection is dominated by interactions of the surface proteins of the bacteria with the substrate atoms. In the current work, molecular dynamics (MD) simulations have been utilized to investigate the mechanics of the associated adhesion forces of bacteria on different surfaces. The unfolding of these adhesion proteins is investigated in order to map these events to earlier experiments on bacterial de-adhesion (using single cell force spectroscopy) with real-life substrates (, ultrahigh molecular weight polyethylene, hydroxyapatite, Ti alloy, and stainless steel).

Triggered Nanoexplosions of Pd Hollow Spheres.

Gas filled Pd nanocontainers can serve as model nanochambers for reaction and phase equilibria studies. In the current study, palladium hollow spheres (PdHS) filled with oxygen are brought in intimate contact with hydrogen filled PdHS at room temperature (with internal pressure in both the spheres at 20 bar). The molecular hydrogen gets chemisorbed in the Pd shell and further diffuses into the oxygen filled sphere.

Crystal Chemistry and Antibacterial Properties of Cupriferous Hydroxyapatite.

Copper-doped hydroxyapatite (HA) of nominal composition Ca(PO)[Cu(OH)O] (0.0 ≤ x ≤ 0.8) was prepared by solid-state and wet chemical processing to explore the impact of the synthesis route and mode of crystal chemical incorporation of copper on the antibacterial efficacy against () and () strains.

Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating.

Pertaining to real-life applications (by scaling up) of hydroxyapatite (HA)-based materials, herein is a study illustrating the role of carbon nanotube (CNT) reinforcement with ceria (CeO₂) and silver (Ag) in HA on titanium alloy (TiAl6V4) substrate, utilizing the plasma-spraying processing technique, is presented. When compared with pure HA coating enhanced hardness (from 2.5 to 5.

Antioxidant and antibacterial hydroxyapatite-based biocomposite for orthopedic applications.

Post-implantation, vicinity acquired oxidative stress and bacterial infections lead to apoptosis with eventual bone-resorption and implant failure, respectively. Thus, in order to combat aforementioned complications, present research aims in utilizing antioxidant ceria (CeO) and antibacterial silver (Ag) reinforced hydroxyapatite (HA) composite with enhanced mechanical and cytocompatible properties. Highly dense (>90%) spark plasma sintered HA-based composites elicits enhanced elastic modulus (121-133 GPa) in comparison to that of HA.

The Role of Nanomechanics in Healthcare.

Nanomechanics has played a vital role in pushing our capability to detect, probe, and manipulate the biological species, such as proteins, cells, and tissues, paving way to a deeper knowledge and superior strategies for healthcare. Nanomechanical characterization techniques, such as atomic force microscopy, nanoindentation, nanotribology, optical tweezers, and other hybrid techniques have been utilized to understand the mechanics and kinetics of biospecies. Investigation of the mechanics of cells and tissues has provided critical information about mechanical characteristics of host body environments.

Role of silver/zinc oxide in affecting de-adhesion strength of Staphylococcus aureus on polymer biocomposites.

A single-cell force spectroscopy is utilized to characterize the dynamics of the transient interaction (0-10s) between alive Staphylococcus aureus and ultra-high molecular weight polyethylene (UHMWPE). Adhesion force of bacteria upon addition of antibacterial additives (i.e.

Adhesion force of staphylococcus aureus on various biomaterial surfaces.

Staphylococcus comprises of more than half of all pathogens in orthopedic implant infections and they can cause major bone infection which can result in destruction of joint and bone. In the current study, adhesion force of bacteria on the surface of various biomaterial surfaces is measured using atomic force microscope (AFM). Staphylococcus aureus was immobilized on an AFM tipless cantilever as a force probe to measure the adhesion force between bacteria and biomaterials (viz.

Carbon Nanotube Functionalization Decreases Osteogenic Differentiation in Aluminum Oxide Reinforced Ultrahigh Molecular Weight Polyethylene.

Ultrahigh molecular weight polyethylene (UHMWPE) is one of the most preferred materials as an acetabular cup-liner for bone implant applications. The current work develops a correlation between wettability, protein adsorption with osteogenic differentiation upon reinforcement of functionalized carbon nanotube (f-CNT) and 10 wt % aluminum oxide (AlO) in compression molded UHMWPE composites. Phase characterization has confirmed the retention of CNTs after compression molding.

Effect of ZnO morphology on affecting bactericidal property of ultra high molecular weight polyethylene biocomposite.

Bacterial infection of implants can be controlled by selective trapping of bacteria, followed with consequent killing by targeted antibacterial agents. Herein, the role of various ZnO morphologies, viz. micro-rods (R), nanoparticles (NP), and micro-disks (D) on antibacterial efficacy of ZnO via release of Zn(2+) and H2O2 is assessed, both as isolated powders and via incorporating them in cytocompatible ultra high molecular weight polyethylene (UHMWPE).

Dispersion fraction enhances cellular growth of carbon nanotube and aluminum oxide reinforced ultrahigh molecular weight polyethylene biocomposites.

Ultrahigh molecular weight polyethylene (UHMWPE) is widely used as bone-replacement material for articulating surfaces due to its excellent wear resistance and low coefficient of friction. But, the wear debris, generated during abrasion between mating surfaces, leads to aseptic loosening of implants. Thus, various reinforcing agents are generally utilized, which may alter the surface and biological properties of UHMWPE.

Domination of volumetric toughening by silver nanoparticles over interfacial strengthening of carbon nanotubes in bactericidal hydroxyapatite biocomposite.

In order to address the problem of bacterial infections in bone-substitution surgery, it is essential that bone replacement biomaterials are equipped with bactericidal components. This research aims to optimize the content of silver (Ag), a well-known antibacterial metal, in a multiwalled carbon nanotube (CNT) reinforced hydroxyapatite (HA) composite, to yield a bioceramic which can be used as an antibacterial and tough surface of bone replacement prosthesis. The bactericidal properties evaluated using Escherichia coli and Staphylococcus epidermidis indicate that CNT reinforcement supports growth of Gram negative E.

Synergistic effect of static magnetic field and HA-Fe3O4 magnetic composites on viability of S. aureus and E. coli bacteria.

In addressing the issue of prosthetic infection, this work demonstrated the synergistic effect of the application of static magnetic field (SMF) and ferrimagnetic substrate properties on the bactericidal property in vitro. This aspect was studied using hydroxyapatite (HA)-xFe3 O4 (x=10, 20, and 40 wt.%) substrates, which have different saturation magnetization properties.

Bactericidal effect of silver-reinforced carbon nanotube and hydroxyapatite composites.

Bacterial infection remains an important risk factor after orthopedic surgery. The present paper reports the synthesis of hydroxyapatite-silver (HA-Ag) and carbon nanotube-silver (CNT-Ag) composites via spark plasma sintering (SPS) route. The retention of the initial phases after SPS was confirmed by phase analysis using X-ray diffraction and Raman spectroscopy.

Multi-scale hierarchy of Chelydra serpentina: microstructure and mechanical properties of turtle shell.

Carapace, the protective shell of a freshwater snapping turtle, Chelydra serpentina, shields them from ferocious attacks of their predators while maintaining light-weight and agility for a swim. The microstructure and mechanical properties of the turtle shell are very appealing to materials scientists and engineers for bio-mimicking, to obtain a multi-functional surface. In this study, we have elucidated the complex microstructure of a dry Chelydra serpentina's shell which is very similar to a multi-layered composite structure.

Melanocyte pigmentation stiffens murine cardiac tricuspid valve leaflet.

Pigmentation of murine cardiac tricuspid valve leaflet is associated with melanocyte concentration, which affects its stiffness. Owing to its biological and viscoelastic nature, estimation of the in situ stiffness measurement becomes a challenging task. Therefore, quasi-static and nanodynamic mechanical analysis of the leaflets of the mouse tricuspid valve is performed in the current work.