Development of rare earth element-based hybrid aluminium composites using stir casting process.

Aerospace and marine industries are constantly in search of materials that can provide good strength and durability while also being lightweight. Aluminium composites with adequate reinforcements have been proven to be effective in achieving incredible mechanical properties while also maintaining a good strength to weight ratio. Numerous studies have been done to study the various possibilities of matrix reinforcement combinations in aluminium composites.

Characterisation of AZ31/TiC composites fabricated via ultrasonic vibration assisted friction stir processing.

In this study, the effect of ultrasonic vibration during Friction Stir Vibration Processing (FSVP) on the microstructure and mechanical behaviour of AZ31/TiC surface composites was investigated. Specifically, Titanium Carbide (TiC) particles were introduced as a reinforcement (15 vol%) into the magnesium alloy AZ31 using both Friction Stir Processing (FSP) and FSVP. Comprehensive examinations were carried out to analyse the microstructure, hardness, and tensile behaviour of the resulting composites.

A study on microstructural, mechanical properties, and optimization of wear behaviour of friction stir processed AZ31/TiC composites using response surface methodology.

The primary objective of this study is to investigate the microstructural, mechanical, and wear behaviour of AZ31/TiC surface composites fabricated through friction stir processing (FSP). TiC particles are reinforced onto the surface of AZ31 magnesium alloy to enhance its mechanical properties for demanding industrial applications. The FSP technique is employed to achieve a uniform dispersion of TiC particles and grain refinement in the surface composite.

Many-objective ant lion optimizer (MaOALO): A new many-objective optimizer with its engineering applications.

Many-objective optimization (MaO) is an important aspect of engineering scenarios. In many-objective optimization algorithms (MaOAs), a key challenge is to strike a balance between diversity and convergence. MaOAs employs various tactics to either enhance selection pressure for better convergence and/or implements additional measures for sustaining diversity.

Multi-objective liver cancer algorithm: A novel algorithm for solving engineering design problems.

This research introduces the Multi-Objective Liver Cancer Algorithm (MOLCA), a novel approach inspired by the growth and proliferation patterns of liver tumors. MOLCA emulates the evolutionary tendencies of liver tumors, leveraging their expansion dynamics as a model for solving multi-objective optimization problems in engineering design. The algorithm uniquely combines genetic operators with the Random Opposition-Based Learning (ROBL) strategy, optimizing both local and global search capabilities.

Optimizing brushless direct current motor design: An application of the multi-objective generalized normal distribution optimization.

In this study, we tackle the challenge of optimizing the design of a Brushless Direct Current (BLDC) motor. Utilizing an established analytical model, we introduced the Multi-Objective Generalized Normal Distribution Optimization (MOGNDO) method, a biomimetic approach based on Pareto optimality, dominance, and external archiving. We initially tested MOGNDO on standard multi-objective benchmark functions, where it showed strong performance.

Multi-objective exponential distribution optimizer (MOEDO): a novel math-inspired multi-objective algorithm for global optimization and real-world engineering design problems.

The exponential distribution optimizer (EDO) represents a heuristic approach, capitalizing on exponential distribution theory to identify global solutions for complex optimization challenges. This study extends the EDO's applicability by introducing its multi-objective version, the multi-objective EDO (MOEDO), enhanced with elite non-dominated sorting and crowding distance mechanisms. An information feedback mechanism (IFM) is integrated into MOEDO, aiming to balance exploration and exploitation, thus improving convergence and mitigating the stagnation in local optima, a notable limitation in traditional approaches.

Mechanical property analysis and dry sand three-body abrasive wear behaviour of AZ31/ZrO composites produced by stir casting.

An experimental study of three body abrasive wear behaviour of AZ31/15 vol.% Zirconium dioxide (ZrO) reinforced composites prepared by stir casting has been carried out. Microstructural analysis of the developed composites was carried out and found out that the microstructure of the composites revealed a uniform distribution of ZrO particles with refinement in the grain size of the matrix from 70 to 20 µm.

A comparative evaluation of nature-inspired algorithms for feature selection problems.

Feature selection is a critical component of machine learning and data mining which addresses challenges like irrelevance, noise, redundancy in large-scale data etc., which often result in the curse of dimensionality. This study employs a K-nearest neighbour wrapper to implement feature selection using six nature-inspired algorithms, derived from human behaviour and mammal-inspired techniques.

Multi-Objective artificial bee colony optimized hybrid deep belief network and XGBoost algorithm for heart disease prediction.

The global rise in heart disease necessitates precise prediction tools to assess individual risk levels. This paper introduces a novel Multi-Objective Artificial Bee Colony Optimized Hybrid Deep Belief Network and XGBoost (HDBN-XG) algorithm, enhancing coronary heart disease prediction accuracy. Key physiological data, including Electrocardiogram (ECG) readings and blood volume measurements, are analyzed.

Microstructure, hardness and wear behavior of ZrC particle reinforced AZ31 surface composites synthesized via friction stir processing.

Dry sliding wear behaviour of friction stir processed (FSP) AZ31 and AZ31/ZrC particles (5, 10, and 15 vol%) reinforced surface composite was investigated at different sliding speeds and loads. The samples were tested using a pin-on-disc apparatus with EN31 steel as the counter body to determine the role of FSP and ZrC reinforcement on the microstructure, hardness, and wear behaviour of AZ31. Base metal AZ31 alloy exhibits a hardness of 60 HV, whereas the 15 vol% ZrC-reinforced composites had the highest hardness of 108 HV.

Optimizing Friction Stir Welding of Dissimilar Grades of Aluminum Alloy Using WASPAS.

Aluminum is a widely popular material due to its low cost, low weight, good formability and capability to be machined easily. When a non-metal such as ceramic is added to aluminum alloy, it forms a composite. Metal Matrix Composites (MMCs) are emerging as alternatives to conventional metals due to their ability to withstand heavy load, excellent resistance to corrosion and wear, and comparatively high hardness and toughness.

A Comparative Analysis on Prediction Performance of Regression Models during Machining of Composite Materials.

Modeling the interrelationships between the input parameters and outputs (responses) in any machining processes is essential to understand the process behavior and material removal mechanism. The developed models can also act as effective prediction tools in envisaging the tentative values of the responses for given sets of input parameters. In this paper, the application potentialities of nine different regression models, such as linear regression (LR), polynomial regression (PR), support vector regression (SVR), principal component regression (PCR), quantile regression, median regression, ridge regression, lasso regression and elastic net regression are explored in accurately predicting response values during turning and drilling operations of composite materials.

Comparison of NSGA-II, MOALO and MODA for Multi-Objective Optimization of Micro-Machining Processes.

The popularity of micro-machining is rapidly increasing due to the growing demands for miniature products. Among different micro-machining approaches, micro-turning and micro-milling are widely used in the manufacturing industry. The various cutting parameters of micro-turning and micro-milling has a significant effect on the machining performance.

Performance Analysis of Radial Basis Function Metamodels for Predictive Modelling of Laminated Composites.

High-fidelity structural analysis using numerical techniques, such as finite element method (FEM), has become an essential step in design of laminated composite structures. Despite its high accuracy, the computational intensiveness of FEM is its serious drawback. Once trained properly, the metamodels developed with even a small training set of FEM data can be employed to replace the original FEM model.

Memetic Cuckoo-Search-Based Optimization in Machining Galvanized Iron.

In this article, an improved variant of the cuckoo search (CS) algorithm named Coevolutionary Host-Parasite (CHP) is used for maximizing the metal removal rate in a turning process. The spindle speed, feed rate and depth of cut are considered as the independent parameters that describe the metal removal rate during the turning operation. A data-driven second-order polynomial regression approach is used for this purpose.