Development and Dissolution Study of a β-Galactosidase Containing Drinking Straw.

Today, in addition to many different physicochemical and pharmacological properties of the active ingredients and excipients, the developer of a pharmaceutical formulation must take into account several factors during the formulation process in order for the patient to cooperate to use the formulation accurately. One of the innovative solutions in paediatrics may be the use of medicated drinking straws. For our studies, we successfully prepared lactase-containing, rapid disintegration particles by two techniques commonly used in the pharmaceutical industry.

Comparative Evaluation of Pellet Cushioning Agents by Various Imaging Techniques and Dissolution Studies.

Most of the commercially available pharmaceutical products for oral administration route are marketed in the tablet dosage forms. However, compression of multiparticulate systems is a challenge for the pharmaceutical research and industry, especially if the individual unit is a coated particle, as the release of the active ingredient depends on the integrity of the coating. In the present study, polymer-coated pellets tableted with different types of excipients (powder, granules, pellets) then were investigated by various tablet-destructive (microscopic) and tablet non-destructive (microfocus X-ray; microCT) imaging methods.

Development of laboratory-scale high-speed rotary devices for a potential pharmaceutical microfibre drug delivery platform.

The production of polymer microfibres and nanofibres using rotary jet spinning as platforms for drug delivery and tissue engineering applications has been explored. The aligned orientation of fibres and consequent improvement in the mechanical properties of the scaffold are essential in several pharmaceutical and biomedical applications, where elastic materials with high tensile resistance are required. This study aimed to develop high-speed rotary jet devices to fabricate polyvinylpyrrolidone-based homopolymer and copolymer rotary-spun fibres and establish a correlation between the operational parameters of the devices and the morphology and microstructure of the fabricated fibres.

Physicochemical analysis in the evaluation of reconstituted dry emulsion tablets.

The aim of this study was to characterize the formation of emulsions by droplet size analysis and turbidimetry during reconstitution from a solid dosage form, namely from dry emulsion systems, which carry an oil phase for poorly soluble active ingredients. For the dry emulsion systems tablets were prepared either from oil-in-water systems using a freeze-drying process or through direct compression containing the same oil and excipients. The ratios of oil to emulgents and oil to xanthan gum were equal in both methods.

Lubricant-Induced Crystallization of Itraconazole From Tablets Made of Electrospun Amorphous Solid Dispersion.

Investigation of downstream processing of nanofibrous amorphous solid dispersions to generate tablet formulation is in a quite early phase. Development of high speed electrospinning opened up the possibility to study tableting of electrospun solid dispersions (containing polyvinylpyrrolidone-vinyl acetate and itraconazole [ITR] in this case). This work was conducted to investigate the influence of excipients on dissolution properties and the feasibility of scaled-up rotary press tableting.

EFFECT OF STORAGE TEMPERATURE ON THE STABILITY OF TOTAL PARENTERAL NUTRITION ADMIXTURES PREPARED FOR INFANTS.

Physical, chemical and microbiological stability of total parenteral nutrient (TPN) admixtures was studied as a function of storage time and temperature. Particle size analysis and zeta potential measurements were carried out to evaluate the possible changes in the kinetic stability of the emulsions as a function of storage time and temperature. The concentration changes of the applied additives, those of the ascorbic acid and L-alanyl-L-glutamine, were also determined under different storage conditions.

Improvement of mechanical properties of pellet containing tablets by thermal treatment.

Batches of partially spray-dried lactose tablets with three different initial tensile strength (∼20N, ∼35N, ∼50N) were made. Changes along a 24h long thermal treatment at 100°C in tensile strength, friability, individual mass, water content, disintegration time, average free volume and wetting properties were evaluated. Caffeine containing gastroresistant pellets were gained by drug layering and filmcoating of inert microcrystalline cellulose pellet cores in fluid bed equipment.

Incorporating small molecules or biologics into nanofibers for optimized drug release: A review.

Over the past several decades, the formulation of novel nanofiber-based drug delivery systems focusing on specific delivery purposes has been investigated worldwide with a continuous level of interest. The unique structure and properties of nanoscale fibrous systems, such as their high specific-area-to-volume ratio and high porosity and the possibility of controlling their crystalline-amorphous phase transitions, make them a desirable formulation pathway to satisfy the needs of recent pharmaceutical development. Fibrous delivery systems can facilitate the accelerated dissolution and increased solubility of small molecules and can also be useful in controlling drug delivery over time (for local or systemic drug administration).

Tracking of crystalline-amorphous transition of carvedilol in rotary spun microfibers and their formulation to orodispersible tablets for in vitro dissolution enhancement.

Physicochemical characterization of microfibers including powder X-ray diffraction, differential scanning calorimetry, attenuated total reflectance Fourier transform infrared spectroscopy, and positron annihilation spectroscopy were used to track the crystalline-amorphous transition of carvedilol during formulation and stability testing. The applied methods unanimously indicated the amorphous transition of carvedilol in the course of rotary spinning, furthermore a supramolecular ordering of chains of polymer matrix was revealed out by positron annihilation spectroscopy. The accelerated stability study (40±2°C/75±5% RH, for 4 weeks) indicated a large stress tolerance capacity of fibers, since only a partial crystallization of the active compound was observable at the last sampling point.

Micro- and macrostructural characterization of polyvinylpirrolidone rotary-spun fibers.

The application of high-speed rotary spinning can offer a useful mean for either preparation of fibrous intermediate for conventional dosage forms or drug delivery systems. Polyvinylpyrrolidone (PVP) and poly(vinylpyrrolidone-vinylacetate) (PVP VA) micro- and nanofibers of different polymer concentrations and solvent ratios were prepared with a high-speed rotary spinning technique. In order to study the influence of parameters that enable successful fiber production from polymeric viscous solutions, a complex micro- and macrostructural screening method was implemented.

Preformulation study of fiber formation and formulation of drug-loaded microfiber based orodispersible tablets for in vitro dissolution enhancement.

Preformulation study of rotary spun hydroxypropyl cellulose fibers was carried out using the combination of textural characterization of gels in the concentration range of 42-60% w/w and optical microscopic evaluation of formed fibers. High adhesiveness values resulted in bead formation at lower polymer concentration, meanwhile fiber formation was hindered when high adhesiveness values were associated with high polymer content. The optimum gel concentration for fiber formation was given to 50% w/w.

Polymers and formulation strategies of nanofibrous systems for drug delivery application and tissue engineering.

During the last decade, the formulation of nanofibrous materials loaded with different drugs for biomedical applications has evoked considerable interest. The large specific surface area, the special micro- and macrostructure of fiber mats, the possibility for gradual release and site-specific local delivery of the active compounds lead to cytotoxicity decrease and enhancement of the therapeutic effect of drugs and implants. The present review details the different spinning techniques applied for the design of micro- and nanofibrous drug delivery systems.

Comparison of directly compressed vitamin B12 tablets prepared from micronized rotary-spun microfibers and cast films.

Fiber-based dosage forms are potential alternatives of conventional dosage forms from the point of the improved extent and rate of drug dissolution. Rotary-spun polymer fibers and cast films were prepared and micronized in order to direct compress after homogenization with tabletting excipients. Particle size distribution of powder mixtures of micronized fibers and films homogenized with tabletting excipients were determined by laser scattering particle size distribution analyzer.

Comparative dissolution study of drug and inert isomalt based core material from layered pellets.

Layered and coated pellets were formulated to control the release of the diclofenac sodium selected as model drug. A highly water soluble isomalt inert pellet core material was used to osmotically modulate the drug release through the swellable polyvinyl acetate coating layer. Image analysis was applied to determine the shape parameters and the swelling behavior of the pellets.