In vitro drug release study of methacrylate polymer blend system: effect of polymer blend composition, drug loading and solubilizing surfactants on drug release.

The application of polymers as the drug delivery systems for treating oral infections is a relatively new area of research. The present study was to test the release of the antibacterial drug chlorhexidine diacetate (CHDA), the antifungal drug Nystatin (NYS) and the antiviral drug acyclovir (ACY) from polymer blends of poly(ethyl methacrylate) and poly(n-hexyl methacrylate) of different compositions. The effects of polymer blend composition, drug loading and solubilizing surfactants on the release of the drugs have been studied.

Effect of propionaldehyde or 2,3-butanedione additives on the mechanical properties of Bis-GMA analog-based composites.

Objectives: The purpose of this study was to evaluate the effect of two additives, propionaldehyde/aldehyde or 2,3-butanedione/diketone, on mechanical properties of Bis-GMA-based composites containing TEGDMA, propoxylated Bis-GMA (CH(3)Bis-GMA) or propoxylated fluorinated Bis-GMA (CF(3)Bis-GMA).

Methods: Three control composites, Bis-GMA/diluent monomer (25/75 mol%), and six test composites, Bis-GMA/diluent monomer/aldehyde or diketone (17/51/32 mol%) were prepared. All composites contained hybrid treated filler (barium aluminosilicate glass/pyrogenic silica; 60 wt%), and 0.

Antimicrobial activity and local release characteristics of chlorhexidine diacetate loaded within the dental copolymer matrix, ethylene vinyl acetate.

In vitro results are presented for a novel oral drug-delivery system ultimately intended for treatment of oral infections in immunocompromised patients. Test samples of ethylene vinyl acetate copolymer (EVA) containing chlorhexidine diacetate (CDA) showed desirable antimicrobial properties and steady, slow release into aqueous and other media after an initial burst of drug release in the first day of liquid exposure. By washing away this initial burst, the proposed mouthguard device should be capable of sustained delivery of locally effective CDA concentrations far below systemically toxic levels.

Effect of treated filler loading on the photopolymerization inhibition and shrinkage of a dimethacrylate matrix.

This study shows how treated filler loading influences the photopolymerization of a dimethacrylate comonomer mixture, regarding, in particular, shrinkage and inhibition under atmospheric oxygen, present in oral environment. Bis-GMA/TEGDMA (75/25 wt.%) resins were loaded with hybrid filler (Ba aluminosilicate glass and pyrogenic silica), treated with gamma-methacryloxy(propyl)trimethoxysilane, at 0-50 wt.

In vitro wear, surface roughness and hardness of propanal-containing and diacetyl-containing novel composites and copolymers based on bis-GMA analogs.

Objective: To evaluate the effect of two additives, aldehyde or diketone, on the wear, roughness and hardness of bis-GMA-based composites/copolymers containing TEGDMA, propoxylated bis-GMA (CH(3)bis-GMA) or propoxylated fluorinated bis-GMA (CF(3)bis-GMA).

Methods: Fifteen experimental composites and 15 corresponding copolymers were prepared combining bis-GMA and TEGDMA, CH(3)bis-GMA or CF(3)bis-GMA, with aldehyde (24 mol% and 32 mol%) or diketone (24 mol% and 32 mol%) totaling 30 groups. For composites, hybrid treated filler (barium aluminosilicate glass/pyrogenic silica; 60 wt%) was added to monomer mixtures.

Release of antimicrobial and antiviral drugs from methacrylate copolymer system: effect of copolymer molecular weight and drug loading on drug release.

Objective: To study the release of antiviral drug acyclovir (ACY) and antibacterial drug chlorhexidine diacetate (CDA) from synthesized copolymers of ethyl methacrylate and hexyl methacrylate of different molecular weights. The effect of the copolymer molecular weight and the effect of drug loading into the copolymer on the release of the drugs have been studied.

Method: Copolymers (I-IV) of ethyl methacrylate (EMA) and hexyl methacrylate (HMA) were synthesized by free radical solution polymerization with a yield of 76-82%.

EVA copolymer matrix for intra-oral delivery of antimicrobial and antiviral agents.

Biocompatible ethylene vinyl acetate copolymer (EVA) was utilized to study the release of an antiviral drug (acyclovir (ACY)) and an antimicrobial drug (doxycycline hyclate (DOH)). Release of both drugs from EVA was measured individually and in combination. The effect of drug combination of DOH and ACY is presented.

Influence of additives on the properties of Bis-GMA/Bis-GMA analog comonomers and corresponding copolymers.

Objectives: The purpose of this study was to evaluate the effect of two additives: propionaldehyde (aldehyde) and 2,3-butanedione (diketone) on the properties of Bis-GMA diluted with TEGDMA and the synthesized Bis-GMA analogs, propoxylated Bis-GMA (CH(3)Bis-GMA) and propoxylated fluorinated Bis-GMA (CF(3)Bis-GMA).

Methods: Nine experimental comonomers were prepared combining Bis-GMA and TEGDMA, CH(3)Bis-GMA, CF(3)Bis-GMA, with aldehyde (32mol%) and diketone (32mol%). Photopolymerization was effected by using Camphorquinone (0.

Stability and release of antiviral drugs from ethylene vinyl acetate (EVA) copolymer.

The use of polymer based drug delivery systems in dentistry is a relatively new area of research with the exception of the inhibition of secondary caries by the release of fluoride ions from polyalkenoate cements and their predecessors silicate cements. The present study was to test on orally biocompatible material, ethylene vinyl acetate copolymer (EVA), for release of antiviral drugs at oral therapeutic levels over extended periods of time. We also determined their stability during film casting and release.

Novel light-cured resins and composites with improved physicochemical properties.

Objectives: The aim of this study was to determine the effect of two new diluent agents (Bis-GMA analogues), at different dilution levels and filler contents on relevant physicochemical properties of several novel resins and composites containing Bis-GMA as matrix. Composites using TEGDMA as diluent were used as control.

Methods: Twenty formulations were prepared combining three monomer mixtures (Bis-GMA/TEGDMA, Bis-GMA/CH(3) Bis-GMA and Bis-GMA/CF(3) Bis-GMA), at three dilution levels (85/15, 10/90, 0/100) and two percentages of filler loading (silanated barium aluminosilicate glass): 0%, 10%, 35%.

Effects of solubilizing surfactants and loading of antiviral, antimicrobial, and antifungal drugs on their release rates from ethylene vinyl acetate copolymer.

Objectives: This study investigates the effects of surfactants and drug loading on the drug release rate from ethylene vinyl acetate (EVA) copolymer. The release rate of nystatin from EVA was studied with addition of non-ionic surfactants Tween 60 and Cremophor RH 40. In addition, the effect of increasing drug load on the release rates of nystatin, chlorhexidine diacetate and acyclovir is also presented.

Poly(ethylene-co-vinyl acetate) copolymer matrix for delivery of chlorhexidine and acyclovir drugs for use in the oral environment: effect of drug combination, copolymer composition and coating on the drug release rate.

Objectives: This study utilizes a bio-compatible ethylene vinyl acetate (EVA) copolymer to deliver drugs at therapeutic levels over extended periods of time. The release rate of an anti-fungal and an anti-microbial drug namely acyclovir (ACY) and chlorhexidine diacetate (CDA) from EVA was investigated individually and as a mixture. The effect of drug combination, the composition of the copolymer and the coating of the matrix with a different polymer on the rate of drug release are presented.

Drug release from cast films of ethylene vinyl acetate (EVA) copolymer: Stability of drugs by 1H NMR and solid state 13C CP/MAS NMR.

The study utilizes an oral biocompatible material based on ethylene vinyl acetate copolymer (EVA) designed to release drugs in vitro at therapeutic levels over several days. We examined the drug stability during film casting process using proton and solid state NMR techniques. The drug-loaded EVA films were prepared from the dry sheet obtained by solvent (dichloromethane) evaporation of polymer casting solutions.

Influence of pH environment on polymer based dental material properties.

Objective: This study aims to analyze the influence of different pH environments causing degradation to the properties of polymer based materials.

Data And Sources: Studies were identified by searching published material in medical and dental literature using general and specialist databases, hand searching key dental journals and searching abstracts from conference proceedings.

Study Selection: Evaluation of published laboratory studies regarding the effects of different pH mediums on resin-based material properties.

Effect of dilution on the kinetics of cross-linking thermal polymerization of dental composite matrix resins.

The effect of dilution of 2,2-bis-(4-(2-hydroxy-3-methacryloxyprop-1oxy) phenyl) propane (bis-GMA) with triethylene glycol demethacrylate (TEGDMA) on the extent of polymerization, Ep, has been studied using differential scanning calorimetry. The isothermal and dynamic measurements indicate that the Ep is affected dramatically by dilution. The residual polymerization was also found to be strongly influenced by dilution.

Development of novel elastomer/methacrylate monomer soft lining materials.

An earlier study identified a formulation comprising a butadiene/styrene copolymer (PBS) gelled with ethyl hexyl methacrylate (5 + formulation) as a potential denture soft lining material. It had good mechanical properties but water uptake was high as a result of the presence of a separating agent. This study has compared the tensile and water absorption properties of four elastomers free from separating agent (three butadiene/styrene, HBS, EBS, SBS, and one isoprene/styrene, SIS) with those of PBS all using the 5 + formulation.

Controlled drug release for oral condition by a novel device based on ethylene vinyl acetate (EVA) copolymer.

The application of drug delivery systems in oral environment is relatively a new area of research with the exception of release of fluoride ions from polyalkenoate cements and their predecessor silicate cements. The present study addresses development of a novel device based on ethylene vinyl acetate copolymer (EVA), a biocompatible material which enables constant drug release over several days to treat oral infections. Drugs incorporated in EVA included tetracycline, minocycline and nystatin together with combinations (C) of nytatin-tetracycline (1 : 1) and nystatin-minocycline (1 : 1).

A polymeric device for delivery of anti-microbial and anti-fungal drugs in the oral environment: effect of temperature and medium on the rate of drug release.

Objectives: The use of drug delivery systems in dentistry is a relatively new area of research with the exception of fluoride ion release from polyalkenoate cements and their predecessor silicate cements. The present study is based on the use of a bio-compatible material ethylene vinyl acetate copolymer (EVA) that enables constant release of drugs of therapeutic levels over extended periods of time at doses suitable for the treatment of oral conditions.

Methods: Polymer casting solutions were made by dissolving EVA and the drug in the ratio of 40:1 in 70 ml of dichloromethane at 38 degrees C for 6 h.

Low viscosity dimethacrylate comonomer compositions [Bis-GMA and CH3Bis-GMA] for novel dental composites; analysis of the network by stray-field MRI, solid-state NMR and DSC & FTIR.

The effect of dilution of 2,2-bis (4-(2-hydroxy-3-methacryloxyprop-1-oxy) phenyl) propane (Bis-GMA) with 2,2-bis(4-(2-methacryloxyprop-1-oxy)phenyl) propane (CH3Bis-GMA) on extent of polymerization (Ep) was investigated by FTIR and NMR. The results correlate well with Ep values of the system and its flexibility probed by Tg (obtained by DSC). Spatially resolved photopolymerization kinetics and polymerization shrinkage (PS, i.

Development of butyl elastomer/methacrylate monomer systems as denture soft lining materials.

Previous studies have shown elastomer/methacrylate monomer formulations to have good strength; however, water uptake was high and they also suffered from oxidation. This study has looked at the use of three different butyl elastomers, well known for their oxidation resistance, butyl (PB), chlorobutyl (PCB) and bromobutyl (PBB). The tensile and water uptake properties of the three elastomers gelled with ethyl hexyl methacrylate containing 1% ethylene glycol dimethacrylate and 1% lauryl peroxide (5+ formulation from previous studies) were studied.

Analysis of a dimethacrylate copolymer (bis-GMA and TEGDMA) network by DSC and 13C solution and solid-state NMR spectroscopy.

In this work the effect of dilution with TEGDMA on the kinetics of Bis-GMA polymerization and on the extent of polymerization or degree of conversion was studied using (a) DSC and (b) NMR. The systems with lower viscosity and lower Tg exhibited higher extent of polymerization. For Bis-GMA/TEGDMA mixtures the calculated Tg values were found to be higher than the experimental values suggesting that a dilution effect is predominant rather than intermolecular hydrogen bonding.

Relationship between composite matrix molecular structure and properties.

The synthesis of three novel dimethacrylate esters for use as the monomer phase in dental composites was studied. The monomers were prepared by the reaction of glycidyl methacrylate with phthalic, isophthalic and terephthalic acids, respectively, and the reaction products were found to be mixtures of isomers. The monomers obtained from the reaction of phthalic and isophthalic acids were low-viscosity liquids and the relationship between viscosity and molecular structure was studied.

Relationship between filler and matrix resin characteristics and the properties of uncured composite pastes.

The relationships between filler type, filler content, matrix resin composition and viscosity and the flow characteristics of composite paste formulations have been investigated. BIS-GMA and 10 experimental BIS-GMA analogues were diluted as needed with TEGDMA to produce 1000 and 2000 cp solutions corresponding to the viscosity range of commercial composite matrices. All of these resins were mixed with a silanated hybrid-filler and a silanated micro-filler.

Evaluating the effect of soft lining materials on the growth of yeast.

Statement Of Problem: Soft lining materials continue to have a place in clinical removable prosthodontics. However, there is an increased probability of yeast colonization on soft lining materials.

Purpose: This study (1) assessed a method of evaluating the effect of long-term soft lining materials on the growth of yeast and (2) investigated the effect five soft lining materials had on the growth of three species of yeast.

Characterization of some aromatic dimethacrylates for dental composite applications.

Several novel dimethacrylates have been developed as alternative matrix materials for dental composite applications. For the cured bulk polymers the equilibrium water uptake, reduction of glass transition temperatures (Tgs) by water sorption, refractive indices and the surface hardness have been determined. The properties were then compared with those of the control Bis-GMA.