Optical and Mechanical Properties of the Multi-Transition Zones of a Translucent Zirconia.

Objective: To characterize the composition, flexure resistance, and optical properties of a multilayer translucent zirconia in relation to its multi-transition zones.

Materials And Methods: A multilayer zirconia (5Y/4Y) and a conventional 3 mol% yttria partially stabilized zirconia (3Y) were investigated. Bar-shaped specimens were obtained from the enamel and dentin layers, and the vertical cross-section of 5Y/4Y (N = 10).

The NF-κB Factor Relish maintains blood progenitor homeostasis in the developing Drosophila lymph gland.

Post-larval hematopoiesis in Drosophila largely depends upon the stockpile of progenitors present in the blood-forming organ/lymph gland of the larvae. During larval stages, the lymph gland progenitors gradually accumulate reactive oxygen species (ROS), which is essential to prime them for differentiation. Studies have shown that ROS triggers the activation of JNK (c-Jun Kinase), which upregulates fatty acid oxidation (FAO) to facilitate progenitor differentiation.

Effect of elastic gradients on the fracture resistance of tri-layer restorative systems.

Objectives: To assess the impact of elastic gradients formed among restorative material, cement, and substrate on the fracture resistance of tri-layer restorative systems.

Methods: Four CAD/CAM materials were utilized, two glass-ceramics (IPS e.max CAD, Vita Suprinity) and two resin-ceramic hybrids (Vita Enamic, Lava Ultimate).

Camera trap surveys of Atlantic Forest mammals: A data set for analyses considering imperfect detection (2004-2020).

Camera traps became the main observational method of a myriad of species over large areas. Data sets from camera traps can be used to describe the patterns and monitor the occupancy, abundance, and richness of wildlife, essential information for conservation in times of rapid climate and land-cover changes. Habitat loss and poaching are responsible for historical population losses of mammals in the Atlantic Forest biodiversity hotspot, especially for medium to large-sized species.

Stress distribution on teeth restored with veneers using various incisal preparation designs: A 3D finite element analysis study.

Statement Of Problem: The type of veneer preparation is often chosen according to the patient's tooth structure and occlusion. Taking biomechanics into account in this decision-making process provides the clinician with more technical information on how to improve the clinical longevity of restorations. However, biomechanical analyses of veneer preparation designs are sparse.

Mammal responses to global changes in human activity vary by trophic group and landscape.

Wildlife must adapt to human presence to survive in the Anthropocene, so it is critical to understand species responses to humans in different contexts. We used camera trapping as a lens to view mammal responses to changes in human activity during the COVID-19 pandemic. Across 163 species sampled in 102 projects around the world, changes in the amount and timing of animal activity varied widely.

Long-term female bias in sex ratios across life stages of Harpy Eagle, a large raptor exhibiting reverse sexual size dimorphism.

The primary (PSR), secondary (SSR) and adult (ASR) sex ratios of sexually reproducing organisms influence their life histories. Species exhibiting reversed sexual size dimorphism (RSD) may imply a higher cost of female production or lower female survival, thus generating biases in PSR, SSR and/or ASR towards males. The Harpy Eagle is the world's largest eagle exhibiting RSD.

The prey of the Harpy Eagle in its last reproductive refuges in the Atlantic Forest.

The Harpy Eagle (Harpia harpyja) is threatened with extinction throughout its distribution in the neotropical forests. In the Atlantic Forest, deforestation has reduced the number of suitable habitats, with only a few remnant forest fragments hosting active nests; currently, the only known nests in this region are in the Central Atlantic Forest Ecological Corridor (CAFEC), in Brazil. Little is known about Harpy Eagle diets in this region, despite this information being essential for developing effective conservation strategies.

High-viscosity glass-ionomer cement or composite resin for restorations in posterior permanent teeth? A systematic review and meta-analyses.

Objectives: Answer the PICO question: Do class I and II posterior restorations in permanent teeth placed with high-viscosity glass-ionomer cement (HV-GIC) fail more than composite resin (CR) restorations?

Data: The study was registered in the PROSPERO database (CRD42020138290). Randomized and controlled clinical trials, comparing the performance of HV-GIC and CR in load bearing cavities of posterior permanent teeth were included. Cochrane risk of bias tool and GRADE were used to assess the quality and certainty of the evidence.

Relationship between battery level and irradiance of light-curing units and their effects on the hardness of a bulk-fill composite resin.

Objectives: This study evaluated the relationship between the battery charge level and irradiance of light-emitting diode (LED) light-curing units (LCUs) and how these variables influence the Vickers hardness number (VHN) of a bulk-fill resin.

Materials And Methods: Four LCUs were evaluated: Radii Plus (SDI), Radii-cal (SDI), Elipar Deep Cure (Filtek Bulk Fill, 3M Oral Care), and Poly Wireless (Kavo Kerr). Irradiance was measured using a radiometer every ten 20-second activations until the battery was discharged.

In-office dental bleaching with violet light emitting diode: bleaching efficacy and pulpal temperature rise.

Objectives: This study evaluated the bleaching efficacy of different in-office protocols associated with violet light emitting diode (V-LED), and measured the pulpal temperature rise caused by V-LED with or without gel application.

Materials And Methods: Bovine incisors were distributed in 4 groups ( = 10): VL - V-LED; HP - 35% hydrogen peroxide (control); HYB - hybrid protocol, V-LED applied without gel for 10 irradiation cycles followed by V-LED applied with gel for another 10 irradiation cycles; and HPVL - gel and V-LED applied for 20 irradiation cycles. Three bleaching sessions were performed with 7-day intervals.

Is the clinical performance of composite resin restorations in posterior teeth similar if restored with incremental or bulk-filling techniques? A systematic review and meta-analysis.

Objectives: A systematic review was performed to analyze the clinical performance of class I and II restorations in posterior teeth placed with the incremental or the bulk-filling techniques. The primary outcome was retention/fracture rate, and the secondary outcomes evaluated were anatomical form, surface texture, color match, marginal adaption, marginal discoloration, caries, and postoperative sensitivity.

Methods: Electronic and manual searches were performed for randomized clinical trials comparing the clinical performance of composite resin restorations in posterior teeth placed with the incremental or the bulk-filling techniques.

Evaluating the Bond Strength of a Polymer Infiltrated Ceramic Network to Zirconia Using the Crossbeam Push-Off Method.

Porcelains and glass-ceramics have been used to produce CAD-milled veneers and crowns for zirconia copings and implant-abutments. This study evaluated the bondstrength of a polymer-infiltrated-ceramic-network to zirconia using two adhesive cement systems: Panavia 21 and Multilink Automix. Lithium disilicate and feldspathic porcelain were also tested as reference CAD-On materials.

Extended glaze firings for porcelain-veneered zirconia: Effects on the mechanical and optical behavior.

Objective: This study evaluated the effect of dwell time (conventional or extended) and cooling protocol (fast or slow) of self-glaze firings on the mechanical (flexural strength and crack propagation) and optical (color and translucency) properties of a porcelain-veneered zirconia system.

Methods: Bilayer disc-shaped samples were prepared (Vita VM9 + In-Ceram YZ) and divided according to the final thermal treatment: glaze firing followed by slow cooling (furnace opening at 200 °C) (G-S) or fast cooling (furnace opening at 600 °C) (G-F, manufacturer-recommended protocol), extended glaze firing (15 min of dwell time) followed by slow cooling (EG-S) or fast cooling (EG-F), or no thermal treatment (CTRL). Porcelain roughness (Ra and Rz) was measured before and after glaze firings.

Failure probability and stress distribution of milled porcelain-zirconia crowns with bioinspired/traditional design and graded interface.

Objective: To evaluate the failure probability and stress distribution of traditional and bioinspired porcelain-zirconia milled crowns, with and without silica infiltration (graded zirconia).

Methods: Traditional crown design had a zirconia infrastructure veneered with porcelain; Bioinspired, had a porcelain infrastructure with translucent-zirconia veneer; Graded and Graded Bioinspired crowns had their zirconia layer infiltrated by silica (n = 25). The cameo surface of each crown (porcelain or zirconia) was glazed.

Flexural strength and crystalline stability of a monolithic translucent zirconia subjected to grinding, polishing and thermal challenges.

The objective of this study is to investigate the magnitude of structural degradation of a monolithic translucent zirconia caused by clinically relevant grinding and polishing procedures, when associated or not with low temperature degradation (LTD), induced by accelerated hydrothermal aging using autoclave or thermocycling Ninety disks (Ø12 × 1 mm) were prepared from dental zirconia for monolithic restorations (Vipi Block Zirconn Translucent, Vipi). The specimens were divided into 3 groups (n = 30) according to surface treatment: As Sintered (untreated), Grind (diamond bur), Grind + Polish (diamond bur + polish); and then subdivided according to aging method (n = 10): Baseline (no aging), Autoclave (134°C, 2.2 kgf/cm pressure for 5 h), and Thermocycling (200,000 cycles, 5°C and 55°C, for 15 s each).

Novel speed sintered zirconia by microwave technology.

Objective: Continuous efforts have been made to hasten the zirconia densification process without compromising properties. This study evaluated the long-term structural durability of microwave speed-sintered zirconia (MWZ) relative to a conventionally sintered zirconia (CZ).

Methods: As-machined dental 3Y-TZP discs (Ø12 × 1.

Damage sensitivity of dental zirconias to simulated occlusal contact.

Objective: Mechanical damages can occur from dental restoration processing and fitting, or while it is in-service. This study evaluates the damage sensitivity of translucent zirconia (5Y-PSZ) relative to conventional 3Y-PSZ following mouth-motion simulations at various loads.

Methods: 5Y-PSZ and 3Y-PSZ discs were adhesively bonded to a dentin-like substrate and divided into groups according to the load (50 N or 200 N) and number of cycles (up to 10) used in the chewing simulation.

Wear behavior and microstructural characterization of translucent multilayer zirconia.

Objective: To characterize the composition, microstructure and wear properties of a multilayer translucent zirconia relative to the conventional 3Y-TZP.

Methods: Two types of ceramics were evaluated: a multilayer zirconia (MULTI, IPS e.max ZirCAD Multi, Ivoclar Vivadent) and a control 3Y-TZP (IPS e.

The bleaching efficacy of carbamide peroxide gels containing potassium nitrate desensitizer.

Background: To evaluate the bleaching efficacy of at-home carbamide peroxide (CP) gels in two concentrations, containing or not a desensitizing agent.

Material And Methods: Forty incisors were divided into four groups (n=10), according to gel concentrations (10% or 22%), and presence or not of 3% potassium nitrate in the gel. A thin layer of gel was applied to the buccal surface of each tooth for 2h/day for 4 weeks.

NEOTROPICAL CARNIVORES: a data set on carnivore distribution in the Neotropics.

Mammalian carnivores are considered a key group in maintaining ecological health and can indicate potential ecological integrity in landscapes where they occur. Carnivores also hold high conservation value and their habitat requirements can guide management and conservation plans. The order Carnivora has 84 species from 8 families in the Neotropical region: Canidae; Felidae; Mephitidae; Mustelidae; Otariidae; Phocidae; Procyonidae; and Ursidae.

Non-silicate nanoparticles for improved nanohybrid resin composites.

Objective: Zirconia and alumina nanoparticles were coated with a silica-rich layer (ALSI and ZRSI) and used to prepare experimental nanohybrid resin composites, which were characterized and compared to a control commercial resin composite (Filtek Z350 XT).

Methods: Silica nanoparticles with sizes compatible to ALSI (Aerosil 150) and ZRSI (Aerosil OX 50) were tested as references. The volume of nanoparticles was equivalent across the composites, which also had consistent content of glass microparticles.

Cytotoxicity of contemporary resin-based dental materials in contact with dentin.

In this study, the cytotoxicity of different combinations of contemporary resin-based restoratives (adhesives, composites, luting agents) against human keratinocytes (HaCaT) was evaluated under two conditions, whether materials were applied to dentin or not. Adhesives (3-step etch-and-rinse/3ER: OptiBond FL; 2-step self-etch/2SE Clearfil SE Bond; Single Bond Universal/UNI), composites (conventional composite resin/CCR: Filtek Z350XT; flowable/FCR: Filtek Z350XT Flow; self-adhesive composite resin/SACR: Dyad Flow), and luting agents (conventional luting agent/CLA: Variolink-II; self-adhesive luting agent/SLA: RelyXU200) were combined according to their clinical use. Eluates from polymerized specimens applied to dentin were placed in contact with cells grown for 1 and 7 d.

NEOTROPICAL ALIEN MAMMALS: a data set of occurrence and abundance of alien mammals in the Neotropics.

Biological invasion is one of the main threats to native biodiversity. For a species to become invasive, it must be voluntarily or involuntarily introduced by humans into a nonnative habitat. Mammals were among first taxa to be introduced worldwide for game, meat, and labor, yet the number of species introduced in the Neotropics remains unknown.

Accurate and Efficient Thermal Stress Analyses of Functionally Graded Solids Using Incompatible Graded Finite Elements.

Functionally graded materials have found a wide usage in high temperature applications. The smooth transition from one material to another, in graded materials, may reduce thermal stresses, residual stresses and stress concentration factors as well as utilize properties of both materials. To perform accurate and efficient finite element analysis for heat transfer and transient thermal stress analyses in two-dimensional functionally graded materials, incompatible graded finite elements are developed and verified.