Spontaneous Formation of Polymeric Nanoribbons in Water Driven by π-π Interactions.

A simple method was developed to produce polymeric nanoribbons and other nanostructures in water. This approach incorporates a perylene diimide (PDI) functionalized by triethylene glycol (TEG) as a hydrophobic supramolecular structure directing unit (SSDU) into the core of hydrophilic poly(N,N-dimethylacrylamide) (PDMAc) chains using RAFT polymerization. All PDI-functional polymers dissolved spontaneously in water, forming different nanostructures depending on the degree of polymerization (DP): nanoribbons and nanocylinders for DP=14 and 22, and spheres for DP>50 as determined by cryo-TEM and SAXS analyses.

Synthesis of New Glycine-Based Polymers and their Thermoresponsive Behavior in Water.

In this work, new glycine-derived polymers are developed that exhibit thermoresponsive properties in water. Therefore, a series of monomers containing one, two, or three amide functional groups and one terminal cyanomethyl group is synthesized. The resulting homopolymers, obtained by free radical polymerization (FRP) and reversible addition fragmentation chain transfer (RAFT) polymerization, display a sharp and reversible upper critical solution temperature (UCST)-type phase transition in water.

Unimer Exchange Is not Necessary for Morphological Transitions in Polymerization-Induced Self-Assembly.

Polymerization-induced self-assembly (PISA) has established itself as a powerful and straightforward method to produce polymeric nano-objects of various morphologies in (aqueous) solution. Generally, spheres are formed in the early stages of polymerization that may evolve to higher order morphologies (worms or vesicles), as the solvophobic block grows during polymerization. Hitherto, the mechanisms involved in these morphological transitions during PISA are still not well understood.

RAFT-Polymerized N-Cyanomethylacrylamide-Based (Co)polymers Exhibiting Tunable UCST Behavior in Water.

In this present work, the synthesis of a new family of upper critical solution temperature (UCST)-thermoresponsive polymers based on N-cyanomethylacrylamide (CMAm) is reported. It is demonstrated that the thermally initiated reversible addition fragmentation chain transfer (RAFT) polymerization of CMAm conducted in N,N-dimethylformamide (DMF) is well controlled. The homopolymer presents a sharp and reversible UCST-type phase transition in pure water with a very small hysteresis between cooling and heating cycles.

Author Correction: Straightforward preparation of supramolecular Janus nanorods by hydrogen bonding of end-functionalized polymers.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Straightforward preparation of supramolecular Janus nanorods by hydrogen bonding of end-functionalized polymers.

Janus cylinders are one-dimensional colloids that have two faces with different compositions and functionalities, and are useful as building blocks for advanced functional materials. Such anisotropic objects are difficult to prepare with nanometric dimensions. Here we describe a robust and versatile strategy to form micrometer long Janus nanorods with diameters in the 10-nanometer range, by self-assembly in water of end-functionalized polymers.

Unexpected thermo-responsiveness of bisurea-functionalized hydrophilic polymers in water.

Hypothesis: Thermoresponsive polymers are important materials for various applications. However, the number of polymers that exhibit this property in the temperature range of interest remains limited. The development of novel rational design strategies through the understanding of the thermal transition's origin is therefore of utmost importance.

Fluorescent Copolymers for Bacterial Bioimaging and Viability Detection.

Novel fluorescent labels with high photostability and high biocompatibility are required for microbiological imaging and detection. Here, we present a green fluorescent polymer chain (GFPC), designed to be nontoxic and water-soluble, for multicolor bioimaging and real-time bacterial viability determination. The copolymer is synthesized using a straightforward one-pot reversible addition-fragmentation chain-transfer (RAFT) polymerization technique.

Biobased Amphiphilic Block Copolymers by RAFT-Mediated PISA in Green Solvent.

Biobased amphiphilic diblock copolymers are prepared thanks to the combination of reversible addition-fragmentation transfer (RAFT) polymerization and polymerization-induced self-assembly (PISA) in an eco-friendly solvent mixture. First, the formation of a poly(acrylic acid) macroRAFT agent (PAA-TTC) is performed in water at 70 °C. Then, in a series of experiments, the PAA-TTC macroRAFT agent is used directly, without purification, as both chain transfer agent and stabilizing agent in the RAFT-PISA of menthyl acrylate (MnA) in dispersion in an ethanol/water mixture.

Structure of the agonist 12-HHT in its BLT2 receptor-bound state.

G Protein-Coupled receptors represent the main communicating pathway for signals from the outside to the inside of most of eukaryotic cells. They define the largest family of integral membrane receptors at the surface of the cells and constitute the main target of the current drugs on the market. The low affinity leukotriene receptor BLT2 is a receptor involved in pro- and anti-inflammatory pathways and can be activated by various unsaturated fatty acid compounds.

RAFT-Mediated Polymerization-Induced Self-Assembly.

After a brief history that positions polymerization-induced self-assembly (PISA) in the field of polymer chemistry, this Review will cover the fundamentals of the PISA mechanism. Furthermore, this Review will also give an overview of some of the features and limitations of RAFT-mediated PISA in terms of the choice of the components involved, the nature of the nanoobjects that can be obtained and how the syntheses can be controlled, as well as some potential applications.

Core-shell polymeric nanoparticles comprising BODIPY and fluorescein as ultra-bright ratiometric fluorescent pH sensors.

A new ratiometric fluorescent pH nanosensor is presented. It is based on ultrabright nanoparticles containing two spatially separated fluorophores: BODIPY covalently linked to the polystyrene core and fluorescein grafted to the nanoparticle shell. The nanoparticles comprise a large number (≥2500) of both fluorescent moieties.

Templated PISA: Driving Polymerization-Induced Self-Assembly towards Fibre Morphology.

Dispersions of block copolymer fibres in water have many potential applications and can be obtained by polymerization-induced self-assembly (PISA), but only under very restricted experimental conditions. In order to enlarge this experimental window, we introduced a supramolecular moiety, a hydrogen-bonded bis-urea sticker, in the macromolecular reversible addition fragmentation chain transfer (RAFT) agent to drive the morphology of the nano-objects produced by RAFT-mediated PISA towards the fibre morphology. This novel concept is tested in the synthesis of a series of poly(N,N-dimethylacrylamide)-b-poly(2-methoxyethyl acrylate) (PDMAc-b-PMEA) diblock copolymers prepared by dispersion polymerization in water.

Beyond Simple AB Diblock Copolymers: Application of Bifunctional and Trifunctional RAFT Agents to PISA in Water.

The influence of the macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agent architecture on the morphology of the self-assemblies obtained by aqueous RAFT dispersion polymerization in polymerization-induced self-assembly (PISA) is studied by comparing amphiphilic AB diblock, (AB) triblock, and triarm star-shaped (AB) copolymers, constituted of N,N-dimethylacrylamide (DMAc = A) and diacetone acrylamide (DAAm = B). Symmetrical triarm (AB) copolymers could be synthesized for the first time in a PISA process. Spheres and higher order morphologies, such as worms or vesicles, could be obtained for all types of architectures and the parameters that determine their formation have been studied.

Poly(N-methylvinylamine)-Based Copolymers for Improved Gene Transfection.

Poly(N-methylvinylamines) with secondary amines can form complexes with plasmid DNA (pDNA) and provide transfection efficiency in HeLa cells in the same order as linear polyethyleneimine but with higher cell viability. Chemical modifications of poly(N-methylvinylamine) backbones are performed to further improve transfection efficiency while maintaining low degree of cytotoxicity. In a first type of polymer, primary amino groups are incorporated via a copolymerization strategy.

Use of Primary and Secondary Polyvinylamines for Efficient Gene Transfection.

Gene transfection with polymeric carrier remains a challenge; particularly, high transfection levels combined with low toxicity are hard to achieve. We herein revisit polyvinylamines, an old and neglected family of cationic polymers. They can be readily obtained by controlled hydrolysis of polyvinylamides prepared through (controlled) radical polymerization.

Rapid and accurate detection of Escherichia coli growth by fluorescent pH-sensitive organic nanoparticles for high-throughput screening applications.

Rapid detection of bacterial growth is an important issue in the food industry and for medical research. Here we present a novel kind of pH-sensitive fluorescent nanoparticles (FANPs) that can be used for the rapid and accurate real-time detection of Escherichia coli growth. These organic particles are designed to be non-toxic and highly water-soluble.

Guidelines for the Synthesis of Block Copolymer Particles of Various Morphologies by RAFT Dispersion Polymerization.

This article presents the recent developments of radical dispersion polymerizaton controlled by reversible addition fragmentation chain transfer (RAFT) for the production of block copolymer particles of various morphologies, such as core-shell spheres, worms, or vesicles. It is not meant to be an exhaustive review but it rather provides guidelines for non-specialists. The article is subdivided into eight sections.

Amphiphilic polyoxometalates for the controlled synthesis of hybrid polystyrene particles with surface reactivity.

Amphiphilic organo-polyoxometalates (POMs) used in the radical emulsion polymerization of styrene allowed the preparation in aqueous medium of stable 50-100 nm polystyrene-POM composite latexes. Thanks to the presence of a trithiocarbonate group in the POM amphiphile, POMs could be covalently linked to the polymer particle surface. The chemical and catalytic integrity of the POMs was confirmed, and the POM-mediated surface photoactivity of the latexes was demonstrated by the spatially controlled nucleation of silver nanoparticles at the periphery of the composites.

Colloidal stability of zwitterionic polymer-grafted gold nanoparticles in water.

We investigate the colloidal stability of gold nanoparticles (AuNPs) coated with zwitterionic sulfobetaine polymers in aqueous solution. Zwitterionic polymers with different molar masses, synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of N,N'-dimethyl(methacrylamido propyl)ammonium propanesulfonate (SPP) exhibit a well known Upper Critical Solution Temperature (UCST) in water, i.e.

Synthesis, characterization and applications of a perdeuterated amphipol.

Amphipols are short amphipathic polymers that can substitute for detergents at the hydrophobic surface of membrane proteins (MPs), keeping them soluble in the absence of detergents while stabilizing them. The most widely used amphipol, known as A8-35, is comprised of a polyacrylic acid (PAA) main chain grafted with octylamine and isopropylamine. Among its many applications, A8-35 has proven particularly useful for solution-state NMR studies of MPs, for which it can be desirable to eliminate signals originating from the protons of the surfactant.

Synthesis of Well-Defined Dawson-Type Poly(N,N-diethylacrylamide) Organopolyoxometalates.

An organotin-substituted Dawson-type phosphotungstate was covalently linked to a trithiocarbonate group by postfunctionalization methods. This organopolyoxometalate led to a series of polyoxometalate (POM)-poly(N,N-diethylacrylamide) hybrids in a controlled way through reversible addition-fragmentation chain transfer (RAFT) polymerization. Detailed comparison with and without the presence of POMs revealed that they do not profoundly disturb the RAFT mechanism, despite their oxidative power.