Evaluation of the Wear of Ni 200 Alloy After Long-Term Carbon Capture in Molten Salts Process.

Reducing CO emissions is one of the major challenges facing the modern world. The overall goal is to limit global warming and prevent catastrophic climate change. One of the many methods for reducing carbon dioxide emissions involves capturing, utilizing, and storing it at the source.

Correction Factors for Sclerometric Test Results in the Technical Assessment of Timber Structural Elements under Diverse Conditions.

Research on existing wooden structures relies on non-destructive and semi-destructive techniques. One of the methods enabling the estimation of the physico-mechanical characteristics of wood in building structures based on established correlational relationships is the sclerometric method. The challenge in utilizing these known correlational relationships is the lack of data regarding the impact of frequently occurring factors in objects on sclerometric test results.

Assessment of the Technical Condition of Timber Structural Elements Using Sclerometric Tests.

The technical assessment of wooden elements is the primary step in their repair and reinforcement design. Normative requirements currently mandate additional tests, including semi-destructive ones, beyond traditional visual assessment. Despite the growing feasibility of semi-destructive tests for qualitative assessments, there remains a paucity of data enabling quantitative assessments.

Evaluation of Technical Condition and Durability of Wooden Shaft Guides with Application of Non-Destructive and Semi-Destructive Testing Methods.

This article addresses the issue of the durability of mining shaft equipment elements. Shafts as a transport route are one of the most exploited parts of a mine. Consequently, their components are exposed to high mechanical stresses, which cause the deterioration of their mechanical properties.

Selected Properties of Self-Compacting Concrete with Recycled PET Aggregate.

In this paper, the issue of self-compacting concrete (SCC) with the addition of polyethylene terephthalate (PET) recycled aggregate is addressed. The PET utilized was a waste fraction in the PET-bottle-recycling process. The implementation of waste in concrete mixes has a positive impact on their environmental and social profile; however, technical requirements are not necessarily met.

The Influence of CFRP Sheets on the Load-Bearing Capacity of the Glued Laminated Timber Beams under Bending Test.

Composite materials are increasingly used to strengthen existing structures or new load-bearing elements, also made of timber. In this paper, the effect of the number of layers of Carbon Fiber Reinforced Polymer (CFRP) on the load-bearing capacity and stiffness of Glued Laminated Timber beams was determined. Experimental research was performed on 32 elements-a series of eight unreinforced beams, and three series of eight reinforced beams: with one, three and five layers of laminate each.

Active Thermography in Diagnostics of Timber Elements Covered with Polychrome.

The contribution of natural wood defects such as knots is an important factor influencing the strength characteristics of structural timber. This paper discusses the use of active thermography in the timber diagnostics, particularly in the determination of the knot area ratio (KAR) in elements covered with paint coatings. Moreover, on the basis of thermal images, the localization for the subsequent semi-destructive tests (SDTs) was established.

Semi-Destructive and Non-Destructive Tests of Timber Structure of Various Moisture Contents.

The condition of heritage and historic timber constructions depends on how they are exploited. Numerous environmental factors degrade the physical and mechanical properties of timber and hence, affect the load-bearing capacity of constructions. As a result, frequent evaluations of their technical condition become necessary.