Comparison of trace element mobility from MSWI ash before and after plasma vitrification.

A common perception of plasma arc treatment systems for municipal solid waste incineration ash is that the resulting vitrified slag is inert from an environmental perspective. Research was conducted to examine this hypothesis and to assess whether reduced pollutant release results from pollutant depletion during the process of the ash with plasma, or encapsulation in the glassy vitrified matrix. The concentrations of four discrete municipal solid waste incineration ash samples before and after plasma arc vitrification in a bench-scale unit were compared.

Material- and Site-Specific Partition Coefficients for Beneficial Use Assessments.

Partition coefficient () values available in the literature are often used in fate and transport modeling conducted as part of beneficial use risk assessments for industrial byproducts. Because element partitioning depends on soil properties as well as characteristics of the byproduct leachate, site-specific values may lead to more accurate risk assessment. In this study, contamination risk to groundwater of beneficially reused byproducts was assessed using batch leaching tests on waste to energy bottom ash and coal combustion fly ash.

Limitations of the toxicity characteristic leaching procedure for providing a conservative estimate of landfilled municipal solid waste incineration ash leaching.

Limitations of the toxicity characteristic leaching procedure (TCLP) for simulating pollutant leaching from wastes disposed of in full-scale landfills are well understood in the waste management profession; the TCLP solution has a lower pH and greater organic acid content than typical landfill leachate. The TCLP serves its intended regulatory objective, however, as long as a conservative estimate of leaching is provided. Here, we examine TCLP's ability to represent worst-case leaching conditions for monofilled municipal solid waste incineration (MSWI) ash.

Trace element mobility from coal combustion residuals exposed to landfill leachate.

Coal combustion residuals (CCR) from energy generation may pose a risk to human health and the environment if not managed properly. Because of new regulations for the management of CCR, generators must dispose of these materials in lined landfill units similar to municipal solid waste (MSW) landfills. Generators could opt to construct dedicated units for CCR (monofilling) or by placing them in MSW landfills (co-disposal).

Waste to energy ash monofill mining: An environmental characterization of recovered material.

Samples of combined bottom and fly ash produced at a U.S. waste-to-energy facility were collected from an ash monofill.

Construction material properties of slag from the high temperature arc gasification of municipal solid waste.

Slag from the high temperature arc gasification (HTAG) of municipal solid waste (MSW) was tested to evaluate its material properties with respect to use as a construction aggregate. These data were compared to previously compiled values for waste to energy bottom ash, the most commonly produced and beneficially used thermal treatment residue. The slag was tested using gradations representative of a base course and a course aggregate.

Use of leaching tests to quantify trace element release from waste to energy bottom ash amended pavements.

A series of roadway tests strips were paved on-site at a landfill in Florida, U.S. Waste to energy (WTE) bottom ash was used as a partial course aggregate replacement in a hot mix asphalt (HMA) and a Portland cement concrete (PCC) pavement, along with control HMA and PCC sections.

Evaluation of the impact of lime softening waste disposal in natural environments.

Drinking water treatment residues (WTR), generated from the lime softening processes, are commonly reused or disposed of in a number of applications; these include use as a soil amendment or a subsurface fill. Recently questions were posed by the Florida regulatory community on whether lime WTR that contained a small percentage of other treatment additives could appropriately be characterized as lime WTR, in terms of total element content and leachability. A study was done using a broad range of leaching tests, including a framework of tests recently adopted by the United States-Environmental Protection Agency (EPA) and tests that were modified to account for scenario specific conditions, such as the presence of natural organic matter (NOM).

Effect of ferrous metal presence on lead leaching in municipal waste incineration bottom ashes.

The recovery of ferrous and non-ferrous metals from waste to energy (WTE) ash continues to advance as the sale of removed metals improves the economics of waste combustion. Published literature suggests that Fe and Fe oxides play a role in suppressing Pb leaching in the Toxicity Characteristic Leaching Procedure (TCLP); further removal of ferrous metals from WTE ashes may facilitate higher Pb leaching under the TCLP. Eight WTE bottom ash size-fractions, from three facilities, were evaluated to assess the effect of metallic Fe addition and ferrous metal removal on TCLP leaching.

Effect of water treatment additives on lime softening residual trace chemical composition--implications for disposal and reuse.

Drinking water treatment residues (WTR) offer potential benefits when recycled through land application. The current guidance in Florida, US allows for unrestricted land application of lime softening WTR; alum and ferric WTR require additional evaluation of total and leachable concentrations of select trace metals prior to land application. In some cases a mixed WTR is produced when lime softening is accompanied by the addition of a coagulant or other treatment chemical; applicability of the current guidance is unclear.

Chemical characterization of high-temperature arc gasification slag with a focus on element release in the environment.

High-temperature arc gasification (HTAG) has been proposed as a viable technology for the generation of energy and the production of saleable byproducts from municipal solid waste (MSW). Total concentrations of elements in HTAG slag were assessed and indicated a high partitioning of trace elements (Pb, Cd, and As) into the flue gas, an issue of concern when assessing the air pollution control residues (APCR) status as a hazardous waste. Hazardous waste leaching tests [such as the toxicity characteristic leaching procedure (TCLP)] were performed and confirmed that the slag did not meet U.