Noninvasive Photothermal Therapy of Nasopharyngeal Cancer Guided by High Efficiency Optical-Absorption Nanomaterial Enhanced by NIR-II Photoacoustic Imaging.

Background: Photothermal therapy (PTT) guided by photoacoustic imaging (PAI) using nanoplatforms has emerged as a promising strategy for cancer treatment due to its efficiency and accuracy. This study aimed to develop and synthesize novel second near-infrared region (NIR-II) absorption-conjugated polymer acceptor acrylate-substituted thiadiazoloquinoxaline-diketopyrrolopyrrole polymers (PATQ-DPP) designed specifically as photothermal and imaging contrast agents for nasopharyngeal carcinoma (NPC).

Methods: The PATQ-DPP nanoparticles were synthesized and characterized for their optical properties, including low optical band gaps.

Int&in: A machine learning-based web server for active split site identification in inteins.

Inteins are proteins that excise themselves out of host proteins and ligate the flanking polypeptides in an auto-catalytic process called protein splicing. In nature, inteins are either contiguous or split. In the case of split inteins, the two fragments must first form a complex for the splicing to occur.

Deposition of Uniform Nanoscale Patterns on Silicon Dioxide Based on Coaxial Jet Direct Writing.

To increase the printing stability of low-viscosity solutions, an auxiliary method was proposed using a coaxial electrohydrodynamic jet. A high-viscosity solution was employed as the outer layer in the printing process, and it could be removed (dissolved away) after printing the structures. A combination of mechanical and electrical forces was proposed to enhance the consistency, durability, and alignment of the printed versatile structures.

Flexible Patterned Electrohydrodynamic Jet Printing Using Orthogonal Deflection Electrodes.

Electrohydrodynamic jet (E-Jet) printing technology provides unmatched advantages in the fabrication of patterned micro/nanostructures. However, the rapid jets generated during printing can lead to localized droplet accumulation on complex structures due to the relatively slow motion control achieved with motorized translation stages, resulting in distorted patterns. To address this challenge, we introduce two jet-deflecting electrodes orthogonally placed on each other, which can rapidly change the electric field in the vicinity of the jet and thus flexibly adjust the flight trajectory of the fast jet to avoid the region where droplets have been deposited.

High-performance flexible organic field effect transistors with print-based nanowires.

Polymer nanowire (NW) organic field-effect transistors (OFETs) integrated on highly aligned large-area flexible substrates are candidate structures for the development of high-performance flexible electronics. This work presents a universal technique, coaxial focused electrohydrodynamic jet (CFEJ) printing technology, to fabricate highly aligned 90-nm-diameter polymer arrays. This method allows for the preparation of uniformly shaped and precisely positioned nanowires directly on flexible substrates without transfer, thus ensuring their electrical properties.

Nib-Assisted Coaxial Electrohydrodynamic Jet Printing for Nanowires Deposition.

This paper presents the concrete design of nanowires under the precise size and morphology that play a crucial role in the practical operation of the micro/nano devices. A straightforward and operative method termed as nib-assistance coaxial electrohydrodynamic (CEHD) printing technology was proposed. It extracts the essence of a nib-assistance electric field intensity to enhance and lessen the internal fluid reflux of the CEHD jet.

Optimized coaxial focused electrohydrodynamic jet printing of highly ordered semiconductor sub-microwire arrays for high-performance organic field-effect transistors.

Patterning of semiconductor polymers is pertinent to preparing and applying organic field-effect transistors (OFETs). In this study, coaxial focused electrohydrodynamic jet printing (high resolution, high speed, and convenient) was used to pattern polymer semiconductors. The influence of the key printing parameters on the width of polymer sub-microwires was evaluated.

Simulation and Printing of Microdroplets Using Straight Electrode-Based Electrohydrodynamic Jet for Flexible Substrate.

Electrohydrodynamic jet (e-jet) printing is a modern and decent fabrication method widely used to print high-resolution versatile microstructures with features down to 10 μm. It is currently difficult to break nanoscale resolution (<100 nm) due to limitations of fluid properties, voltage variations, and needle shapes. This paper presents developments in drop-on-demand e-jet printing based on a phase-field method using a novel combined needle and straight electrode to print on a flexible PET substrate.

Large area polymer semiconductor sub-microwire arrays by coaxial focused electrohydrodynamic jet printing for high-performance OFETs.

Large area and highly aligned polymer semiconductor sub-microwires were fabricated using the coaxial focused electrohydrodynamic jet printing technology. As indicated by the results, the sub-microwire arrays have smooth morphology, well reproducibility and controllable with a width of ~110 nm. Analysis shows that the molecular chains inside the sub-microwires mainly exhibited edge-on arrangement and the π-stacking direction (010) of the majority of crystals is parallel to the long axis of the sub-microwires.

Simulation of Cone-Jet and Micro-Drip Regimes and Printing of Micro-Scale Patterns on PET Substrate.

The fabrication of various micro-patterns on polymer insulating substrates is a current requirement in micro-electromechanical system (MEMS) and packaging sectors. In this paper, we use electrohydrodynamic jet (E-Jet) printing to create multifaceted and stable micro-patterns on a polyethylene terephthalate (PET) substrate. Initially, simulation was performed to investigate optimized printing settings in phase field physics for the usage of two distinct functional inks.

Multi-Modal Optical Imaging and Combined Phototherapy of Nasopharyngeal Carcinoma Based on a Nanoplatform.

Nasopharyngeal carcinoma (NPC) is a common malignant tumor of the head and neck with a high incidence rate worldwide, especially in southern China. Phototheranostics in combination with nanoparticles is an integrated strategy for enabling simultaneous diagnosis, real-time monitoring, and administration of precision therapy for nasopharyngeal carcinoma (NPC). It has shown great potential in the field of cancer diagnosis and treatment owing to its unique noninvasive advantages.

Numerical modeling and analysis of coaxial electrohydrodynamic jet printing.

Coaxial electrohydrodynamic jet (CE-Jet) printing is an encouraging method for fabrication of high-resolution micro and nanostructures in MEMS systems. This paper presents a novel simulation work based on phase field method which is considered as a precise technique in fluid dynamics. The study explores influence of various parameters such as applied voltage, needle-substrate distance, dynamic viscosity, relative permittivity, needle size and flow rate on stability and resolution of CE-Jet morphologies.

Hierarchical Artificial Compound Eyes with Wide Field-of-View and Antireflection Properties Prepared by Nanotip-Focused Electrohydrodynamic Jet Printing.

Artificial compound eyes (ACEs) endowed with durable superhydrophobicity, wide field-of-view (FOV), and antireflection properties are extremely appealing in advanced micro-optical systems. However, the simple and high-efficiency fabrication of ACEs with these functions is still a major challenge. Herein, inspired by moth eyes, ACEs with hierarchical macro/micro/nano structures were fabricated using the combination of nanotip-focused electrohydrodynamic jet (NFEJ) printing and air-assisted deformation processes.

Fabrication and Characterization of a Microscale Piezoelectric Vibrator Based on Electrohydrodynamic Jet Printed PZT Thick Film.

This paper proposes a novel way of preparing a PZT thick film micro vibrator using the electrohydrodynamic jet (E-Jet) printing technique. Initially, a micro piezoelectric vibrator was simulated and designed for obtaining optimized structure, which has a total thickness of less than 600 µm. Subsequently, the PZT thick film element was directly printed on the elastic body using the E-Jet printing.

Preparation of aligned nanofibers using parallel inductive-plates assisted electrospinning.

Electrospinning is a simple, cost-effective, and versatile technique for fabrication of nanofibers. However, nanofibers obtained from the conventional electrospinning are typically disordered, which seriously limits their application. In this work, we present a novel and facile technique to obtain aligned nanofibers with high efficiency by using parallel inductive-plates assisted electrospinning (PIES).

Characterization of the complete chloroplast genome sequence of and its phylogenetic implications.

is a perennial vine of the family Menispermaceae and distributed in Hunan, Hubei, Guangxi, and Sichuan province of P. R. China.

The complete chloroplast genome of var. , an endemic medicinal herb in China.

var. is a species of flowering herb of the family Liliaceae and widely distributed in 12 provinces in China. It has been used in Chinese traditional medicine for centuries.

Microtip focused electrohydrodynamic jet printing with nanoscale resolution.

Electrohydrodynamic jet (E-Jet) printing is a promising manufacturing technique for micro-/nano-patterned structures with high resolution, high efficiency and high material compatibility. However, further improvement of the necking ratio of the E-Jet is still limited by the focusing principle. Moreover, ink viscosity is limited to values well below 90 mPa s owing to the high probability of nozzle blockage.

Facile and scalable fabrication of Ni cantilever nanoprobes using silicon template and micro-electroforming techniques for nano-tip focused electrohydrodynamic jet printing.

Electrohydrodynamic jet (E-Jet) printing is a powerful technique for micro/nanostructure fabrication with high resolution and efficiency. However, conventional E-Jet printing are still limited in printing accuracy and ink adaptability due to the nozzle clogging effect. In this paper, we develop a nano-tip focused electrohydrodynamic jet (NFEJ) method to print high-resolution structures.

Electrohydrodynamic jet 3D printing of PCL/PVP composite scaffold for cell culture.

Controlled printing of biodegradable and bioresorbable polymers at desired 3D scaffold is of great importance for cell growth and tissue regeneration. In this work, a novel electrohydrodynamic jet 3D printing technology with the resultant effect of electrohydrodynamic force and thermal convection was developed, and its feasibility to fabricate controllable filament composite scaffolds was verified. This method introduces an effective thermal field under the needle to simultaneously enhance the ink viscosity, jetting morphology controllability and printing structure solidify.

Instrument for fine control of drop-on-demand electrohydrodynamic jet printing by current measurement.

In this work, an instrument of drop-on-demand electrohydrodynamic jet (DoD E-Jet) printing device equipped with a current measurement and control system was designed and developed for finely controlling the printing process. The relationships between the current and printing parameters of voltage, frequency, and flow rate were deeply investigated, and the examination data and conclusion were obtained under the condition of the needle size remaining unchanged. Especially, the equation relationship between the flow rate and current was established, which can be used for the modification of the DoD E-Jet printing process.

The first complete chloroplast genome of and its phylogenetic position within Orchidaceae.

is a plant of the family Orchidaceae and mainly distributed in subtropical and tropical regions of the world. In Chinese traditional medicine, it has been used for the treatment of hemostasis, carbuncle, and furuncle for centuries. The chloroplast (cp) genome of , sequenced based on next-generation platform (NEOSAT), is 157,274 bp in size.

Nanoscale coaxial focused electrohydrodynamic jet printing.

Controlled patterning of nanostructures at desired positions is of great importance for high-performance M/NEMS devices. Here, we demonstrate a high-resolution, high-speed and cost-effective fabrication method, named coaxial focused electrohydrodynamic jet printing, to print functional nanostructures. A coaxial needle was designed and developed; a functional ink and high viscosity liquid are applied in the inner and outer needle, respectively.

Fabrication of Crack-Free Barium Titanate Thin Film with High Dielectric Constant Using Sub-Micrometric Scale Layer-by-Layer E-Jet Deposition.

Dense and crack-free barium titanate (BaTiO₃, BTO) thin films with a thickness of less than 4 μm were prepared by using sub-micrometric scale, layer-by-layer electrohydrodynamic jet (E-jet) deposition of the suspension ink which is composed of BTO nanopowder and BTO sol. Impacts of the jet height and line-to-line pitch of the deposition on the micro-structure of BTO thin films were investigated. Results show that crack-free BTO thin films can be prepared with 4 mm jet height and 300 μm line-to-line pitch in this work.