Direct 3D cell-printing of human skin with functional transwell system.

Three-dimensional (3D) cell-printing has been emerging as a promising technology with which to build up human skin models by enabling rapid and versatile design. Despite the technological advances, challenges remain in the development of fully functional models that recapitulate complexities in the native tissue. Moreover, although several approaches have been explored for the development of biomimetic human skin models, the present skin models based on multistep fabrication methods using polydimethylsiloxane chips and commercial transwell inserts could be tackled by leveraging 3D cell-printing technology.

Three-Dimensional Cell Printing of Large-Volume Tissues: Application to Ear Regeneration.

The three-dimensional (3D) printing of large-volume cells, printed in a clinically relevant size, is one of the most important challenges in the field of tissue engineering. However, few studies have reported the fabrication of large-volume cell-printed constructs (LCCs). To create LCCs, appropriate fabrication conditions should be established: Factors involved include fabrication time, residence time, and temperature control of the cell-laden hydrogel in the syringe to ensure high cell viability and functionality.

Current advances in three-dimensional tissue/organ printing.

Three-dimensional (3D) tissue/organ printing is a major aspect of recent innovation in the field of tissue engineering and regenerative medicine. 3D tissue/organ printing aims to create 3D living tissue/organ analogues, and have evolved along with advances in 3D printing techniques. A diverse range of computer-aided 3D printing techniques have been applied to dispose living cells together with biomaterials and supporting biochemical factors within pre-designed 3D tissue/organ analogues.

Three-Dimensional Printing of Tissue/Organ Analogues Containing Living Cells.

The technical advances of three-dimensional (3D) printing in the field of tissue engineering have enabled the creation of 3D living tissue/organ analogues. Diverse 3D tissue/organ printing techniques with computer-aided systems have been developed and used to dispose living cells together with biomaterials and supporting biochemicals as pre-designed 3D tissue/organ models. Furthermore, recent advances in bio-inks, which are printable hydrogels with living cell encapsulation, have greatly enhanced the versatility of 3D tissue/organ printing.

Redefining the Septal L-Strut to Prevent Collapse.

During septorhinoplasty, septal cartilage is frequently resected for various purposes but the L-strut is preserved. Numerous materials are inserted into the nasal dorsum during dorsal augmenation rhinoplasty without considering nasal structural safety. This study used a finite element method (FEM) to redefine the septal L-strut, to prevent collapse as pressure moved from the rhinion to the supratip breakpoint on the nasal dorsum and as the contact percentage between the caudal L-strut and the maxillary crest changed.

Computer-aided multiple-head 3D printing system for printing of heterogeneous organ/tissue constructs.

Recently, much attention has focused on replacement or/and enhancement of biological tissues via the use of cell-laden hydrogel scaffolds with an architecture that mimics the tissue matrix, and with the desired three-dimensional (3D) external geometry. However, mimicking the heterogeneous tissues that most organs and tissues are formed of is challenging. Although multiple-head 3D printing systems have been proposed for fabricating heterogeneous cell-laden hydrogel scaffolds, to date only the simple exterior form has been realized.

Redefining the septal L-strut in septal surgery.

In septal surgery, the surgeon preserves the L-strut, the portion anterior to a vertical line drawn from the rhinion to the anterior nasal spine (ANS) and at least a 1-cm width of the dorsal and caudal septal segment, to decrease the potential for loss of the tip and dorsal nasal support. However, nasal tip collapse and saddle deformities occur occasionally. We utilized a mechanical approach to determine the safe width size for the L-strut in contact with the maxillary crest.

Laparoscopic-assisted resection of jejunojejunal intussusception caused by a juvenile polyp in an adult.

Most bowel intussusceptions in adults have a leading point. However, there have been few reports of jejunojejunal intussusception secondary to a solitary juvenile polyp in adult. We report herein the case of a 19-year-old female with a solitary juvenile polyp in the jejunum causing intussusception.

A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting.

Bioprinting is a promising technique for engineering composite tissues, such as osteochondral tissues. In this study, as a first step toward bioprinting-based osteochondral tissue regeneration, we systematically examined the behavior of chondrocytes and osteoblasts to hyaluronic acid (HA) and type I collagen (Col-1) hydrogels. First, we demonstrated that cells on hydrogels that were comprised of major native tissue extracellular matrix (ECM) components (i.

Fast detection of high-order epistatic interactions in genome-wide association studies using information theoretic measure.

There are many algorithms for detecting epistatic interactions in GWAS. However, most of these algorithms are applicable only for detecting two-locus interactions. Some algorithms are designed to detect only two-locus interactions from the beginning.

3D printing of composite tissue with complex shape applied to ear regeneration.

In the ear reconstruction field, tissue engineering enabling the regeneration of the ear's own tissue has been considered to be a promising technology. However, the ear is known to be difficult to regenerate using traditional methods due to its complex shape and composition. In this study, we used three-dimensional (3D) printing technology including a sacrificial layer process to regenerate both the auricular cartilage and fat tissue.

Development of a 3D bellows tracheal graft: mechanical behavior analysis, fabrication and an in vivo feasibility study.

Artificial tracheal grafts should have not only enough compressive strength to maintain an open tracheal lumen, but also sufficient flexibility for stable mechanical behavior, similar to the native trachea at the implant site. In this study, we developed a new 3D artificial tracheal graft using a bellows design for considering its mechanical behavior. To investigate the mechanical behavior of the bellows structure, finite element method (FEM) analysis in terms of longitudinal tension/compression, bending and radial compression was conducted.

Effect of pore architecture and stacking direction on mechanical properties of solid freeform fabrication-based scaffold for bone tissue engineering.

Fabrication of a three-dimensional (3D) scaffold with increased mechanical strength may be an essential requirement for more advanced bone tissue engineering scaffolds. Various material- and chemical-based approaches have been explored to enhance the mechanical properties of engineered bone tissue scaffolds. In this study, the effects of pore architecture and stacking direction on the mechanical and cell proliferation properties of a scaffold were investigated.

Association of four-locus gene interaction with aspirin-intolerant asthma in Korean asthmatics.

Introduction: Aspirin-intolerant asthma (AIA), a major clinical presentation of aspirin hypersensitivity, affects 10% of adult asthmatics. The genetic risk factors involved in the susceptibility to AIA have recently been investigated, but multilocus single-nucleotide polymorphisms (SNPs) associated with this susceptibility has not been evaluated.

Methods: We examined 246 asthmatic patients: 94 having aspirin intolerance and 152 having aspirin tolerance.