Release-modulating mechanism and comparative pharmacokinetics in beagle dogs of bethanechol-loaded oral dosage forms.

Bethanechol chloride (BTC), a quaternary ammonium compound used in bladder dysfunction treatment, requires challenges in developing optimal oral dosage forms due to its high water-solubility, short half-life, rapid elimination and four times a day administration. The aim of this study was to develop optimal BTC-loaded oral dosage forms that could provide both rapid onset and sustained therapeutic effects while reducing the frequency of conventional four-times-daily dosing (Mytonin® tablets). Four different BTC-loaded oral dosage forms were designed including gastro-retentive tablet (GRT), controlled-release tablet (CRT), bilayer tablet (BLT), and tablet-in-tablet (TIT).

Development of 3D-printed dual-release fixed-dose combination through double-melt extrusion.

This study aimed to develop a 3D-printed fixed-dose combination tablet featuring differential release of two drugs using double-melt extrusion (DME). The hot-melt extrusion (HME) process was divided into two steps to manufacture a single filament containing the two drugs. In Step I, a sustained-release matrix of acetaminophen (AAP) was obtained through HME at 190 °C using Eudragit® S100, a pH-dependent polymer with a high glass transition temperature.

Nanonization and Deformable Behavior of Fattigated Peptide Drug in Mucoadhesive Buccal Films.

This study was tasked with the design of mucoadhesive buccal films (MBFs) containing a peptide drug, leuprolide (LEU), or its diverse nanoparticles (NPs), for enhanced membrane permeability via self-assembled nanonization and deformable behavior. An LEU-oleic acid conjugate (LOC) and its self-assembled NPs (LON) were developed. Additionally, a deformable variant of LON (d-LON) was originally developed by incorporating l-α-phosphatidylcholine into LON as an edge activator.

Preparation of tofacitinib sustained-release tablets using hot melt extrusion technology.

This study aimed to develop a tablet that shows a drug release profile similar to the tofacitinib sustained-release tablet (Xeljanz XR®; OROS™) using hot melt extrusion technology. Tofacitinib citrate was selected as the drug. HPMCAS, HPMCP, and Kollidon VA64 were used as thermoplastic polymers to prepare a hot-melt extrudate.

Polyelectrolyte-based solid dispersions for enhanced dissolution and pH-Independent controlled release of sildenafil citrate.

The aim of this study was to design a novel matrix tablet with enhanced dissolution and pH-independent controlled release of sildenafil citrate (SIL), a drug with pH-dependent solubility, by using solid dispersions (SDs) and polyelectrostatic interactions. SIL-loaded SDs were prepared using various polymeric carriers such as poloxamer 188, poloxamer 407, Soluplus®, polyvinylpyrrolidone (PVP) K 12, and PVP K 17 by the solvent evaporation method. Among these polymers, Soluplus® was found to be the most effective in SDs for enhancing the drug dissolution over 6 h in pH 6.

Cellular Efficacy of Fattigated Nanoparticles and Real-Time ROS Occurrence Using Microfluidic Hepatocarcinoma Chip System: Effect of Anticancer Drug Solubility and Shear Stress.

The objective of this study was to evaluate the effectiveness of organ-on-chip system investigating simultaneous cellular efficacy and real-time reactive oxygen species (ROS) occurrence of anticancer drug-loaded nanoparticles (NPs) using hepatocarcinoma cells (HepG2) chip system under static and hepatomimicking shear stress conditions (5 dyne/cm). Then, the role of hepatomimetic shear stress exposed to HepG2 and drug solubility were compared. The highly soluble doxorubicin (DOX) and poorly soluble paclitaxel (PTX) were chosen.

Investigation of Patient-Centric 3D-Printed Orodispersible Films Containing Amorphous Aripiprazole.

The objective of this study was to design and evaluate an orodispersible film (ODF) composed of aripiprazole (ARP), prepared using a conventional solvent casting technique, and to fuse a three-dimensional (3D) printing technique with a hot-melt extrusion (HME) filament. Klucel LF (hydroxypropyl cellulose, HPC) and PE-05JPS (polyvinyl alcohol, PVA) were used as backbone polymers for 3D printing and solvent casting. HPC-, PVA-, and ARP-loaded filaments were applied for 3D printing using HME.

Improved Bioavailability of Poorly Water-Soluble Drug by Targeting Increased Absorption through Solubility Enhancement and Precipitation Inhibition.

Itraconazole (ITZ) is a class II drug according to the biopharmaceutical classification system. Its solubility is pH 3-dependent, and it is poorly water-soluble. Its pKa is 3.

Modulation of the clinically accessible gelation time using glucono-d-lactone and pyridoxal 5'-phosphate for long-acting alginate in situ forming gel injectable.

The purpose of this study was to design alginate in situ forming gel (ISFG) injectable with clinically acceptable gelation time and controlled release of hydrophobic drug. Milled or unmilled paliperidone palmitate (PPP) was used. The gelation time was controlled by varying the ratios of glucono-d-lactone (GDL) and pyridoxal 5'-phosphate (PLP) in prefilled alginate solution mixtures (ASMs) containing PPP, CaCO, GDL and PLP for clinically acceptable injectability.

Development of Pelubiprofen Tromethamine with Improved Gastrointestinal Safety and Absorption.

Pelubiprofen (PEL), which is a commercialized non-steroidal anti-inflammatory drug (NSAID), is associated with the risk of gastrointestinal (GI) adverse events following long-term exposure and has poor water-soluble properties. Here, a new pelubiprofen tromethamine (PEL-T) with improved solubility, permeability, GI safety, and absorption, compared to PEL, has been developed. The nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR) results confirmed that the PEL-T was well formed.

Development and Validation of an LC-MS/MS Assay to Quantitate 2',4',6'-Trihydroxyacetophenone in Rat and Dog Plasma and its Application to a Pharmacokinetic Study.

In the present study, a simple, rapid, and reliable bioanalytical method was developed using liquid chromatography with tandem-mass spectrometry (LC-MS/MS) to quantify 2',4',6'-trihydroxyacetophenone (THAP) in rat and dog plasma with 2',4',6'-trihydroxybenzaldehyde as an internal standard (IS). The LC-MS/MS instrument was operated in the multiple reaction monitoring (MRM) mode to detect THAP at m/z transition 166.89 > 82.

Preparation of Hot-Melt Extruded Dosage Form for Enhancing Drugs Absorption Based on Computational Simulation.

The aim of this study was to control the dissolution rate and permeability of cilostazol. To enhance the dissolution rate of the active pharmaceutical ingredient (API), hot-melt extrusion (HME) technology was applied to prepare a solid dispersion (SD). To control permeability in the gastrointestinal tract regardless of food intake, the HME process was optimized based on physiologically based pharmacokinetic (PBPK) simulation.

Preparation and evaluation of identifiable quick response (QR)-coded orodispersible films using 3D printer with directly feeding nozzle.

3D-printing technology is growing in importance due to increased availability and a wider range of applications. Here, we prepared and evaluated a hot melt pneumatic (HMP) 3D-printed QR (Quick Response)-coded orodispersible film (QRODF) containing a poorly water-soluble aripiprazole (ARP). Moreover, QRODF was formulated to evaluate the extrusion process and characterize physicochemical properties of drug-loaded films.

Preparation of celecoxib tablet by hot melt extrusion technology and application of process analysis technology to discriminate solubilization effect.

The aim of this study was to prepare various types of solid dispersions (SDs) by the hot-melt extrusion technique. Next, process analytical technology (PAT) such as Fourier transform-infrared (FT-IR) and Raman and near infrared (NIR) spectroscopy were applied to determine the solubilization effect. The SDs and its tablets were prepared.

Fabrication of Intragastric Floating, Controlled Release 3D Printed Theophylline Tablets Using Hot-Melt Extrusion and Fused Deposition Modeling.

This work presents a novel approach for producing gastro-retentive floating tablets (GRFT) by coupling hot-melt extrusion (HME) and fused deposition three-dimensional printing (3DP). Filaments containing theophylline (THEO) within a hydroxypropyl cellulose (HPC) matrix were prepared using HME. 3DP tablets with different infill percentages and shell thickness were developed and evaluated to determine their drug content, floating behavior, dissolution, and physicochemical properties.

Utilization of a fattigation platform gelatin-oleic acid sodium salt conjugate as a novel solubilizing adjuvant for poorly water-soluble drugs via self-assembly and nanonization.

Solubilizing adjuvants are commonly used to dissolve insoluble drugs by simply adding in a formulation. In this study, gelatin and oleic acid sodium salt (OAS), a generally recognized as safe-listed material were chosen and conjugated to develop a natural solubilizing adjuvant using the fattigation platform technology to enhance solubility and dissolution rate of poorly water-soluble drugs according to self-assembly and nanonization principle when simply mixed with poorly water-soluble drugs. We synthesized the gelatin and OAS conjugates (GOC) at three different ratios (1:1, 1:3, 1:5; GOC 1, GOC 2, and GOC 3, respectively) via the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction using a spray dryer.

Customized Novel Design of 3D Printed Pregabalin Tablets for Intra-Gastric Floating and Controlled Release Using Fused Deposition Modeling.

Three-dimensional (3D) printing has been recently employed in the design and formulation of various dosage forms with the aim of on-demand manufacturing and personalized medicine. In this study, we formulated a floating sustained release system using fused deposition modeling (FDM). Filaments were prepared using hypromellose acetate succinate (HPMCAS), polyethylene glycol (PEG 400) and pregabalin as the active ingredient.

Investigation of Crystallization and Salt Formation of Poorly Water-Soluble Telmisartan for Enhanced Solubility.

The crystal changes and salt formation of poorly water-soluble telmisartan (TEL) in various solvents were investigated for enhanced solubility, stability and crystallinity. Polymorphic behaviors of TEL were characterized by dispersing in distilled water, acetone, acetonitrile, DMSO, or ethanol using Method I: without heat and then dried under vacuum at room temperature; and Method II: with heat below boiling temperature, cooled at 5 °C, and then dried under vacuum at 40 °C. For salt formation (Method III), the following four powdered mixtures were prepared by dispersing in solution of hydrochloric acid (HCl) (pH 1.

Double controlled release of highly insoluble cilostazol using surfactant-driven pH dependent and pH-independent polymeric blends and in vivo bioavailability in beagle dogs.

Commercially available cilostazol (CIL) tablet releases drug immediately and is given twice a day as an antiplatelet and vasodilatory agent. However, clinical usefulness of immediate release (IR) preparation is limited due to its extremely poor water solubility and the difficulty in sustaining the blood concentration, resulting in unwanted side effects such as headaches, pyknocardia and heavy-headed symptoms. To achieve once a day dosage form with enhanced solubility and controlled release, double controlled release CIL matrix tablets (DCRT) were designed by modulating a sol-gel process of binary polymeric blends of a pH-independent hydroxylpropylmethylcellulose (HPMC) and a pH-dependent polymer (carbomer) assisted with anionic surfactant (sodium lauryl sulfate, SLS).

Preparation of Sustained Release Tablet with Minimized Usage of Glyceryl Behenate Using Post-Heating Method.

The purpose of this study was to prepare sustained release (SR) matrix tablets using a direct compression incorporated with a post-heating process. Allopurinol was selected due to the water-soluble property and Compritol 888 ATO® (also known as glyceryl behenate) was used as an SR matrix-forming agent. The API, SR material, microcrystalline cellulose, and magnesium stearate (lubricant) were mixed and prepared into a tablet by a direct compression method.

Design and evaluation of clickable gelatin-oleic nanoparticles using fattigation-platform for cancer therapy.

The principles of bioorthogonal click chemistry and metabolic glycoengineering were applied to produce targeted anti-cancer drug delivery via fattigation-platform-based gelatin-oleic nanoparticles. A sialic acid precursor (AcManNAz) was introduced to the cell surface. Gelatin and oleic acid were conjugated by 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) chemistry with the subsequent covalent attachment of dibenzocyclooctyne (DBCO) in a click reaction on the cell surface.

Process Analytical Quality Control of Tailored Drug Release Formulation Prepared via Hot-Melt Extrusion Technology.

The objective of the present study was to compare the influence of Eudragit RS PO and RL PO blends on the release of water-soluble and insoluble drugs from hot-melt extruded formulations. In addition, we aimed to evaluate drug content uniformity and distribution by Fourier transform-infrared (FT-IR) chemical imaging. Theophylline (TP) and carbamazepine (CBZ) were selected as the water-soluble and insoluble model drugs, respectively.

In Vitro-In Vivo Correlation Using In Silico Modeling of Physiological Properties, Metabolites, and Intestinal Metabolism.

Background: Recently, pharmaceutical research has focused on in vitro-in vivo correlation as a novel challenge, and in silico modeling has been an important component. As in silico models are highly representative of practical use, regulatory agencies such as the US Food and Drug Administration and European Medicines Agency have recognized and utilized in silico modeling as a useful tool; this allows pharmaceutical organizations to use Physiologically Based Pharmacokinetic (PBPK) models for decision-making, which may aid the financial efficiency of a clinical trial. However, some studies have shown differences of up to approximately 40% in pharmacokinetic parameters such as area under the curve or maximum serum concentration between observed and simulated data.