Circularly Polarized High-Harmonic Beams Carrying Self-Torque or Time-Dependent Orbital Angular Momentum.

In the rapidly evolving field of structured light, self-torque has been recently defined as an intrinsic property of light beams carrying time-dependent orbital angular momentum. In particular, extreme-ultraviolet (EUV) beams with self-torque, exhibiting a topological charge that continuously varies on the subfemtosecond time scale, are naturally produced in high-order harmonic generation (HHG) when driven by two time-delayed intense infrared vortex beams with different topological charges. Until now, the polarization state of such EUV beams carrying self-torque has been restricted to linear states due to the drastic reduction in the harmonic up-conversion efficiency with increasing the ellipticity of the driving field.

Isolated attosecond pulse generation in a semi-infinite gas cell driven by time-gated phase matching.

Isolated attosecond pulse (IAP) generation usually involves the use of short-medium gas cells operated at high pressures. In contrast, long-medium schemes at low pressures are commonly perceived as inherently unsuitable for IAP generation due to the nonlinear phenomena that challenge favourable phase-matching conditions. Here we provide clear experimental evidence on the generation of isolated extreme-ultraviolet attosecond pulses in a semi-infinite gas cell, demonstrating the use of extended-medium geometries for effective production of IAPs.

Robust Isolated Attosecond Pulse Generation with Self-Compressed Subcycle Drivers from Hollow Capillary Fibers.

High-order harmonic generation (HHG) arising from the nonperturbative interaction of intense light fields with matter constitutes a well-established tabletop source of coherent extreme-ultraviolet and soft X-ray radiation, which is typically emitted as attosecond pulse trains. However, ultrafast applications increasingly demand isolated attosecond pulses (IAPs), which offer great promise for advancing precision control of electron dynamics. Yet, the direct generation of IAPs typically requires the synthesis of near-single-cycle intense driving fields, which is technologically challenging.

Chemically crosslinked hyaluronic acid-chitosan hydrogel for application on cartilage regeneration.

Articular cartilage is an avascular tissue that lines the ends of bones in diarthrodial joints, serves as support, acts as a shock absorber, and facilitates joint's motion. It is formed by chondrocytes immersed in a dense extracellular matrix (principally composed of aggrecan linked to hyaluronic acid long chains). Damage to this tissue is usually associated with traumatic injuries or age-associated processes that often lead to discomfort, pain and disability in our aging society.

DEAE/Catechol-Chitosan Conjugates as Bioactive Polymers: Synthesis, Characterization, and Potential Applications.

This work provides the first description of the synthesis and characterization of water-soluble chitosan (Cs) derivatives based on the conjugation of both diethylaminoethyl (DEAE) and catechol groups onto the Cs backbone (Cs-DC) in order to obtain a Cs derivative with antioxidant and antimicrobial properties. The degree of substitution [DS (%)] was 35.46% for DEAE and 2.

Optimization of pulse self-compression in hollow capillary fibers using decreasing pressure gradients.

The improvement of techniques for the generation of near-infrared (NIR) few-cycle pulses is paving the way for new scenarios in time-resolved spectroscopy and the generation of ultrashort extreme-ultraviolet pulses through high-harmonic generation. In this work, we numerically study how to optimize the self-compression of NIR pulses using decreasing pressure gradients in hollow capillary fibers (HCFs). We identify a moderate nonlinear regime in which sub-cycle pulses are obtained with very good temporal quality from an input 30 fs pulse centered at a 800 nm wavelength and coupled as the fundamental mode of an argon-filled HCF fully evacuated at the output end.

Necklace-structured high-harmonic generation for low-divergence, soft x-ray harmonic combs with tunable line spacing.

The extreme nonlinear optical process of high-harmonic generation (HHG) makes it possible to map the properties of a laser beam onto a radiating electron wave function and, in turn, onto the emitted x-ray light. Bright HHG beams typically emerge from a longitudinal phased distribution of atomic-scale quantum antennae. Here, we form a transverse necklace-shaped phased array of linearly polarized HHG emitters, where orbital angular momentum conservation allows us to tune the line spacing and divergence properties of extreme ultraviolet and soft x-ray high-harmonic combs.

Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting.

Efficient wound treatments to target specific events in the healing process of chronic wounds constitute a significant aim in regenerative medicine. In this sense, nanomedicine can offer new opportunities to improve the effectiveness of existing wound therapies. The aim of this study was to develop catechol bearing polymeric nanoparticles (NPs) and to evaluate their potential in the field of wound healing.

DEAE-chitosan nanoparticles as a pneumococcus-biomimetic material for the development of antipneumococcal therapeutics.

Advanced biomaterials provide an interesting and versatile platform to implement new and more effective strategies to fight bacterial infections. Chitosan is one of these biopolymers and possesses relevant features for biomedical applications. Here we synthesized nanoparticles of chitosan derivatized with diethylaminoethyl groups (ChiDENPs) to emulate the choline residues in the pneumococcal cell wall and act as ligands for choline-binding proteins (CBPs).

Hyaluronic acid (HA)-coated naproxen-nanoparticles selectively target breast cancer stem cells through COX-independent pathways.

Cytotoxic chemotherapy continues to be the main therapeutic option for patients with metastatic breast cancer. Several studies have reported a significant association between chronic inflammation, carcinogenesis and the presence of cancer stem cells (CSC). We hypothesized that the use of non-steroidal anti-inflammatory drugs targeted to the CSC population could help reducing tumor progression and dissemination in otherwise hard to treat metastatic breast cancer.

Ultrashort visible energetic pulses generated by nonlinear propagation of necklace beams in capillaries.

The generation of ultrashort visible energetic pulses is investigated numerically by the nonlinear propagation of infrared necklace beams in capillaries. We have developed a (3+1)D model that solves the nonlinear propagation equation, including the complete spatio-temporal dynamics and the azimuthal dependence of these structured beams. Due to their singular nonlinear propagation, the spectrum broadening inside the capillary extends to the visible region in a controlled way, despite the high nonlinearity, avoiding self-focusing.

Microfluidics generation of chitosan microgels containing glycerylphytate crosslinker for in situ human mesenchymal stem cells encapsulation.

Human mesenchymal stem cells (hMSCs) are an attractive source for cell therapies because of their multiple beneficial properties, i.e. via immunomodulation and secretory factors.

Vitamin B9 derivatives as carriers of bioactive cations for musculoskeletal regeneration applications: Synthesis, characterization and biological evaluation.

The development of new drugs for musculoskeletal regeneration purposes has attracted much attention in the last decades. In this work, we present three novel vitamin B9 (folic acid)-derivatives bearing divalent cations (ZnFO, MgFO and MnFO), providing their synthesis mechanism and physicochemical characterization. In addition, a strong emphasis has been placed on evaluating their biological properties (along with our previously reported SrFO) using human mesenchymal stem cells (hMSC).

Evaluation of Glycerylphytate Crosslinked Semi- and Interpenetrated Polymer Membranes of Hyaluronic Acid and Chitosan for Tissue Engineering.

In the present study, semi- and interpenetrated polymer network (IPN) systems based on hyaluronic acid (HA) and chitosan using ionic crosslinking of chitosan with a bioactive crosslinker, glycerylphytate (GPhy), and UV irradiation of methacrylate were developed, characterized and evaluated as potential supports for tissue engineering. Semi- and IPN systems showed significant differences between them regarding composition, morphology, and mechanical properties after physicochemical characterization. Dual crosslinking process of IPN systems enhanced HA retention and mechanical properties, providing also flatter and denser surfaces in comparison to semi-IPN membranes.

Trains of attosecond pulses structured with time-ordered polarization states.

Ultrafast laser pulses generated at the attosecond timescale represent a unique tool to explore the fastest dynamics in matter. An accurate control of their properties, such as polarization, is fundamental to shape three-dimensional laser-driven dynamics. We introduce a technique to generate attosecond pulse trains whose polarization state varies from pulse to pulse.

Chitosan-stabilized silver nanoclusters with luminescent, photothermal and antibacterial properties.

The aim of this paper is to achieve in situ photochemical synthesis of silver nanoclusters (AgNCs) stabilized by the multiple-amine groups of chitosan (Ch@AgNCs) with luminescent and photothermal properties. Ch@AgNCs were obtained by applying a fast and simple methodology previously described by our group. Direct functionalization of AgNCs with chitosan template provided new nanohybrids directly in water solution, both in the presence or absence of oxygen.

3D Printing of a Reactive Hydrogel Bio-Ink Using a Static Mixing Tool.

Hydrogel-based bio-inks have recently attracted more attention for 3D printing applications in tissue engineering due to their remarkable intrinsic properties, such as a cell supporting environment. However, their usually weak mechanical properties lead to poor printability and low stability of the obtained structures. To obtain good shape fidelity, current approaches based on extrusion printing use high viscosity solutions, which can compromise cell viability.

Chitosan hydrogels functionalized with either unfractionated heparin or bemiparin improve diabetic wound healing.

Diabetes mellitus causes severe impairment in the cutaneous wound healing process, which has led to extensive research striving to establish new treatments. In this work, we describe the effects of chitosan hydrogels functionalized with either unfractionated heparin or bemiparin (a low molecular weight heparin, LMWH) as topical treatments in an experimental diabetic wound healing model. Although wound morphometry showed similar values at the end of the study, microscopic analyses revealed impaired healing in diabetic animals in terms of inflammation and tissue formation.

Anti-Inflammatory Polymeric Nanoparticles Based on Ketoprofen and Dexamethasone.

Polymeric nanoparticles that combine dexamethasone and naproxen reduce inflammation and synergistically inhibit Interleukin-12b () transcription in macrophages. This effect can be the result of a cyclooxygenase-dependent or a cyclooxygenase-independent mechanism. The aim of this work is to obtain potent anti-inflammatory polymeric nanoparticles by the combination of dexamethasone and ketoprofen, one of the most efficient cyclooxygenase-inhibitors among non-steroidal anti-inflammatory drugs, with appropriate hydrodynamic properties to facilitate accumulation and co-release of drugs in inflamed tissue.

Glycerylphytate crosslinker as a potential osteoinductor of chitosan-based systems for guided bone regeneration.

Chitosan-based membranes are promising systems for guided bone regeneration. In this work, we used glycerylphytate as ionic crosslinker and osteinductor compound for the fabrication of chitosan membranes as supports for human mesenchymal stem cells. Three different glycerylphytate-crosslinked membranes were developed by changing the crosslinker concentration, from 2.

Polymeric Nanoparticles that Combine Dexamethasone and Naproxen for the Synergistic Inhibition of Il12b Transcription in Macrophages.

Recent studies have demonstrated in vivo synergistic immunosuppressive and anti-inflammatory capacity of dexamethasone (Dx) and naproxen (NAP) in collagen-induced arthritis (CIA) rats. However, the molecular basis of this synergistic effect is barely understood. The low solubility of these drugs and their adverse effects hamper their efficacy on the treatment of inflammatory processes making nanoparticulated systems promising candidates to overcome these drawbacks.

Bibliographic review on the state of the art of strontium and zinc based regenerative therapies. Recent developments and clinical applications.

Musculoskeletal disorders such as osteoporosis and rheumatoid arthritis are responsible for more than 25k deaths every year in the European Union and constitute a chronic burden on the individuals who suffer from this condition. There is no medical cure for these diseases and there are many therapies applied which have limited effectiveness and severe side effects over time. Regenerative therapies are being studied as a potential treatment for musculoskeletal diseases and are known for their upgrading effects of the natural healing processes carried out in the human body.

Glycerylphytate as an ionic crosslinker for 3D printing of multi-layered scaffolds with improved shape fidelity and biological features.

The fabrication of intricate and long-term stable 3D polymeric scaffolds by a 3D printing technique is still a challenge. In the biomedical field, hydrogel materials are very frequently used because of their excellent biocompatibility and biodegradability, however the improvement of their processability and mechanical properties is still required. This paper reports the fabrication of dual crosslinked 3D scaffolds using a low concentrated (<10 wt%) ink of gelatin methacryloyl (GelMA)/chitosan and a novel crosslinking agent, glycerylphytate (G1Phy) to overcome the current limitations in the 3D printing field using hydrogels.