Reduced Graphene Oxide/Organic Dye Composites for Bioelectroconversion of Saccharides: Application for Detection of Saccharides and α-Amylase Assessments.

In this study, PQQ-dependent glucose dehydrogenase (PQQ-GDH) was immobilized onto reduced graphene oxide (rGO) modified with organic dyes from three different classes (acridine, arylmethane, and diazo); namely, neutral red (NR), malachite green (MG), and congo red (CR) formed three types of biosensors. All three rGO/organic dye composites were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. The impact of three rGO/organic dye modifications employed in bioelectrocatalytic systems on changes in enzyme activity and substrate selectivity was investigated.

Capacitance-Based Biosensor for the Measurement of Total Loss of L-Amino Acids in Human Serum during Hemodialysis.

In this paper, we present a biosensor based on a gold nanoparticle (AuNP)-modified Pt electrode with an adjusted membrane containing cross-linked L-amino acid oxidase for the detection and quantification of total L-amino acids. The designed biosensor was tested and characterized using the capacitance-based principle, capacitance measurements after electrode polarization, disconnection from the circuit, and addition of the respective amount of the analyte. The method was implemented using the capacitive and catalytic properties of the Pt/AuNP electrode; nanostructures were able to store electric charge while at the same time catalyzing the oxidation of the redox reaction intermediate HO.

Technical suitability and reliability of an in vivo and non-invasive biosensor-type glucose assessment as a potential biomarker for multiple stressors in fishes: an evaluation on Salmonids.

Regardless of the wide use of glucose measurements in stress evaluation, there are some inconsistencies in its acceptance as a stress marker. To meet the challenge and test the reliability/suitability of glucose measurement in practice, we simulated different environmental/anthropogenic exposure scenarios in this study. We aimed to provoke stress in fish followed by a 2-week stress recovery period and under the cumulative effect of leachate fish exposed to pathogenic oomycetes (Saprolegnia parasitica) to represent a possible infection in fish.

Reagentless D-Tagatose Biosensors Based on the Oriented Immobilization of Fructose Dehydrogenase onto Coated Gold Nanoparticles- or Reduced Graphene Oxide-Modified Surfaces: Application in a Prototype Bioreactor.

As electrode nanomaterials, thermally reduced graphene oxide (TRGO) and modified gold nanoparticles (AuNPs) were used to design bioelectrocatalytic systems for reliable D-tagatose monitoring in a long-acting bioreactor where the valuable sweetener D-tagatose was enzymatically produced from a dairy by-product D-galactose. For this goal D-fructose dehydrogenase (FDH) from immobilized on these electrode nanomaterials by forming three amperometric biosensors: AuNPs coated with 4-mercaptobenzoic acid (AuNP/4-MBA/FDH) or AuNPs coated with 4-aminothiophenol (AuNP/PATP/FDH) monolayer, and a layer of TRGO on graphite (TRGO/FDH) were created. The immobilized FDH due to changes in conformation and spatial orientation onto proposed electrode surfaces catalyzes a direct D-tagatose oxidation reaction.

Tethered Lipid Membranes as a Nanoscale Arrangement towards Non-Invasive Analysis of Acute Pancreatitis.

Extracellular heat shock proteins (HSPs) mediate immunological functions and are involved in pathologies such as infection, stress, and cancer. Here, we demonstrated the dependence of an amount of HSP70 and HSP90 in serum vs. severity of acute pancreatitis (AP) on a cohort of 49 patients.

Acclimation effect on fish behavioural characteristics: determination of appropriate acclimation period for different species.

In the present study, the authors investigated the effect of acclimation duration (up to 4 h) on behavioural characteristics of taxonomically and functionally different fish species, i.e., the migratory rheophilic salmonids rainbow trout (Oncorhynchus mykiss) and Atlantic salmon (Salmo salar), and the non-migratory eurytopic European perch (Perca fluviatilis) and three-spined stickleback (Gasterosteus aculeatus).

The Synergy of Thermally Reduced Graphene Oxide in Amperometric Urea Biosensor: Application for Medical Technologies.

Thermally reduced graphene oxide (TRGO) is a graphene-based nanomaterial that has been identified as promising for the development of amperometric biosensors. Urease, in combination with TRGO, allowed us to create a mediator-free amperometric biosensor with the intention of precise detection of urea in clinical trials. Beyond simplicity of the technology, the biosensor exhibited high sensitivity (2.

Thermally reduced graphene oxide: The study and use for reagentless amperometric D-fructose biosensors.

Aiming to create reagentless amperometric D-fructose biosensor, graphene based electrode materials have been synthesized by newly proposed thermal reduction of graphene oxide. The method allowed to separate and collect different fractions of thermally reduced graphene oxide (TRGO) with different physicochemical properties. The structural characteristics and surface morphologies of TRGO fractions were evaluated using SEM, XRD, TGA analysis, Raman spectroscopy and BET measurements.

Computational modeling of mediator oxidation by oxygen in an amperometric glucose biosensor.

In this paper, an amperometric glucose biosensor is modeled numerically. The model is based on non-stationary reaction-diffusion type equations. The model consists of four layers.

Modelling carbon nanotubes-based mediatorless biosensor.

This paper presents a mathematical model of carbon nanotubes-based mediatorless biosensor. The developed model is based on nonlinear non-stationary reaction-diffusion equations. The model involves four layers (compartments): a layer of enzyme solution entrapped on a terylene membrane, a layer of the single walled carbon nanotubes deposited on a perforated membrane, and an outer diffusion layer.

Fine structure and related properties of the assembleable carbon nanotubes based electrode for new family of biosensors with chooseable selectivity.

Surfaces of constituent parts of biosensors based on single wall carbon nanotube layer were investigated and compare for properly functioning and faulty biosensors. Though the original technology is acceptable for changing of the selectivity, only glucose sensitive biosensors are investigated. Based on the results of the study, a correlation between the features of the nanoscale structures and parameters of amperiometric biosensors for assemblage of which an innovative approach is described.

Application of oxygen-independent biosensor for testing yeast fermentation capacity.

The pyrroloquinoline quinone (PQQ)-dependent soluble glucose dehydrogenase based carbon paste electrodes were investigated and applied for glucose monitoring in the oxygen deficient media. Reagentless biosensors possessing a wide linear range (up to 5 mM glucose with a detection limit of 0.12 mM) were designed.

Modified graphitized carbon black as transducing material for reagentless H2O2 and enzyme sensors.

Direct electron transfer between redox enzymes and electrodes is the basis for the third generation biosensors. We established direct electron transfer between quinohemoprotein alcohol dehydrogenase (PQQ-ADH) and modified carbon black (CBs) electrodes. Furthermore, for the first time, this phenomenon was observed for pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase (PQQ-GDH).

Wiring of PQQ-dehydrogenases.

The performance of pyrroloquinoline quinone (PQQ) dependent alcohol dehydrogenase (ADH) and two types of PQQ-glucose dehydrogenases in solution and when immobilized on the carbon paste electrodes modified with ferrocene derivatives is investigated. The immobilization of ADH consisting of PQQ and four hemes improves its stability up to 10 times. Both PQQ and heme moieties are involved in the electron transport from substrate to electrode.

Bioelectrochemical application of some PQQ-dependent enzymes.

This paper focuses on the use of PQQ-dependent enzymes (PQQ enzymes) in amperometrical biosensors and gives emphasis on their innovative designs and applications. The study covers some aspects in the evolution of biosensors based on PQQ enzymes. Main attention is focused on the electrochemical properties of PQQ enzymes as very promising materials for the formation of electrochemical biosensors.