Design of Nanostraws in Amine-Functionalized MCM-41 for Improved Adsorption Capacity in Carbon Capture.

Polymeric amine encapsulation in high surface area MCM-41 particles for CO capture is well established but has the drawback of leaching out the water-soluble polymer upon exposure to aqueous environments. Alternatively, chemical (covalent) grafting amine functional groups from an alkoxysilane such as 3-aminopropyltriethoxysilane (APTES) on MCM-41 offer better stability against this drawback. However, the diffusional restriction exhibited by the narrow uniform MCM-41 pores (2-4 nm) may impede amine functionalization of the available silanol groups within the inner mesoporous core.

Recent Progress in Electrochemical Upgrading of Bio-Oil Model Compounds and Bio-Oils to Renewable Fuels and Platform Chemicals.

Sustainable production of renewable carbon-based fuels and chemicals remains a necessary but immense challenge in the fight against climate change. Bio-oil derived from lignocellulosic biomass requires energy-intense upgrading to produce usable fuels or chemicals. Traditional upgrading methods such as hydrodeoxygenation (HDO) require high temperatures (200−400 °C) and 200 bar of external hydrogen.

Integrating Halloysite Nanostraws in Porous Catalyst Supports to Enhance Molecular Transport.

In many porous catalyst supports, the accessibility of interior catalytic sites to reactant species could be restricted due to limitations of reactant transport through pores comparable to reactant dimensions. The interplay between reaction and diffusion in porous catalysts is defined through the Thiele modulus and the effectiveness factor, with diffusional restrictions leading to high Thiele moduli, reduced effectivess factors, and a reduction in the observed reaction rate. We demonstrate a method to integrate ceramic nanostraws into the interior of ordered mesoporous silica MCM-41 to mitigate diffusional restrictions.

A Promising Solution for Food Waste: Preparing Activated Carbons for Phenol Removal from Water Streams.

Phenol and its derivatives are highly toxic chemicals and are widely used in various industrial applications. Therefore, the industrial wastewater streams must be treated to lower the concentration of phenol before discharge. At the same time, food waste has been a major environmental problem globally and the scientific community is eagerly seeking effective management solutions.

Thermoresponsive Coatings on Hollow Particles with Mesoporous Shells Serve as Stimuli-Responsive Gates to Species Encapsulation and Release.

Nanoscale capsule-type particles with stimuli-respondent transport of chemical species into and out of the capsule are of significant technological interest. We describe the facile synthesis, properties, and applications of a temperature-responsive silica-poly( N-isopropylacrylamide) (PNIPAM) composite consisting of hollow silica particles with ordered mesoporous shells and a complete PNIPAM coating layer. These composites start with highly monodisperse, hollow mesoporous silica particles fabricated with precision using a template-driven approach.

A Bottle-around-a-Ship Method To Generate Hollow Thin-Shelled Particles Containing Encapsulated Iron Species with Application to the Environmental Decontamination of Chlorinated Compounds.

Thin-shelled hollow silica particles are synthesized using an aerosol-based process where the concentration of a silica precursor tetraethyl orthosilicate (TEOS) determines the shell thickness. The synthesis involves a novel concept of the salt bridging of an iron salt, FeCl, to a cationic surfactant, cetyltrimethylammonium bromide (CTAB), which modulates the templating effect of the surfactant on silica porosity. The salt bridging leads to a sequestration of the surfactant in the interior of the droplet with the formation of a dense silica shell around the organic material.

Investigation of in situ and ex situ catalytic pyrolysis of miscanthus × giganteus using a PyGC-MS microsystem and comparison with a bench-scale spouted-bed reactor.

The objective of the present work is to explore the particularities of a micro-scale experimental apparatus with regards to the study of catalytic fast pyrolysis (CFP) of biomass. In situ and ex situ CFP of miscanthus × giganteus were performed with ZSM-5 catalyst. Higher permanent gas yields and higher selectivity to aromatics in the bio-oil were observed from ex situ CFP, but higher bio-oil yields were recorded during in situ CFP.

Catalytic pyrolysis of miscanthus × giganteus in a spouted bed reactor.

A conical spouted bed reactor was designed and tested for fast catalytic pyrolysis of miscanthus × giganteus over Zeolite Socony Mobil-5 (ZSM-5) catalyst, in the temperature range of 400-600 °C and catalyst to biomass ratios 1:1-5:1. The effect of operating conditions on the lumped product distribution, bio-oil selectivity and gas composition was investigated. In particular, it was shown that higher temperature favors the production of gas and bio-oil aromatics and results in lower solid and liquid yields.