A Case of Varus Collapse and Bone Defects in Revision Total Knee Arthroplasty, after 12 Years of Primary Total Knee Replacement: Surgical Challenge and Bailout.

Introduction: The failure of total knee arthroplasties (TKA) due to aseptic implant loosening is now the most common cause of long-term failure. Patients with varus alignment of the tibial or femoral component with additional bone collapse are a specific subset. It is unclear, however, whether implant fixation fails first or if bone collapse occurs first.

A case series of post-tuberculous Baker's cyst.

Introduction: The gastrocnemius-semimembranous bursa of the knee, which connects to the posterior region of the joint capsule, becomes distended in a Baker's (popliteal) cyst. In adults, it is nearly always secondary to pathological changes in the knee joint that cause an effusion. Baker cysts are mostly asymptomatic, but they may have presentations ranging from mild swelling, a picture similar to infective arthritis, to massive swelling leading to rupture and causing lower limb ischemia.

Minimally invasive endoscopic management of tubercular tenosynovitis of the anterior tibial tendon.

Unlabelled: The incidence of tubercular tenosynovitis around the foot and ankle is rare even in endemic areas. We present an unusual case involving the isolated tubercular tenosynovitis of the Anterior Tibial tendon, which was successfully managed through a combination of medical treatment and endoscopic intervention. Our patient, a 30-year-old female, sought medical attention due to a gradually worsening painful swelling localized to the anterior aspect of her left ankle.

A systematic review of techniques for step cut osteotomy in cubitus varus: A comprehensive analysis.

Background: Cubitus varus, a common post-traumatic deformity of the elbow in children, poses challenges for both patients and surgeons. Step cut osteotomy has emerged as a reasonable surgical technique to address this condition, offering multiple approaches and modifications.

Methods: We present a comprehensive systematic review of techniques for step cut osteotomy in cubitus varus, analyzing 13 studies that meet our inclusion criteria.

Photoredox-Catalyzed Divergent Radical Cascade Annulations of 1,6-Enynes via Pyridine -Oxide-Promoted Vinyl Radical Generation.

The divergent organophotoredox-catalyzed radical cascade annulation reactions of 1,6-enynes were developed. A series of cyclopropane-fused hetero- and carbo-bicyclic, tricyclic, and spiro-tetracyclic compounds were facilely synthesized from a broad scope of 1,6-enynes and 2,6-lutidine -oxide under mild and metal-free conditions with blue light-emitting diode light irradiation. The cascade annulation reaction occurs with the intermediacy of a β-oxyvinyl radical, which is produced from photocatalytically generated pyridine -oxy radical addition to the carbon-carbon triple bond.

Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments.

Hastelloy is categorized as difficult to cut superalloy widely used in aerospace, nuclear reactor components and chemical industry because of its magnificent strength and higher heat efficiency. Since, the machining of this material is quite difficult and hence suitable cooling systems are required to achieve sustainable manufacturing goals. The present investigation has been focused on the machining performance and sustainability assessment of turning Hastelloy C-276 in dry, flood and minimum quantity lubrication (MQL) environments.

Promising Role of Polylactic Acid as an Ingenious Biomaterial in Scaffolds, Drug Delivery, Tissue Engineering, and Medical Implants: Research Developments, and Prospective Applications.

In the present scenario, the research is now being focused on the naturally occurring polymers that can gradually replace the existing synthetic polymers for the development of bio composites having applications in medical surgeries and human implants. With promising mechanical properties and bio compatibility with human tissues, poly lactic acid (PLA) is now being viewed as a future bio material. In order to examine the applicability of PLA in human implants, the current article sheds light on the synthesis of PLA and its various copolymers used to alter its physical and mechanical properties.

Identification of localized defects and fault size estimation of taper roller bearing (NBC_30205) with signal processing using the Shannon entropy method in MATLAB for automobile industries applications.

Rotating machine is a common class of machinery in most of the industry and the main root cause of machinery failure is a faulty bearing. Bearings are most widely used in various types of machine elements ranging from small to heavy machinery and the common cause of machinery failure is a fault in bearings. Bearing faults can be external or internal which mainly depends on different operating conditions and these faults may cause severe damage to rotating components in machinery.

Progressive developments and challenges in dissimilar laser welding of steel to various other light alloys (Al/Ti/Mg): A comprehensive review.

In recent days, the utilization of lightweight alloys for various applications has been increased massively. Starting from the automobile industry, aerospace industry, and even in the biomedical field, there is a need for dissimilar precise joining of steel to other light alloys (magnesium alloy, aluminum alloy, titanium alloy). However, those alloys are characterized by different melting temperatures, machinability, strength, thermal conductivity, and oxygen reactivity.

Comparative Study on the Behavior of Reinforced Concrete Beam Retrofitted with CFRP Strengthening Techniques.

Lateral reinforcement has a significant impact on the strength and ductility of concrete. Extra confinement is provided in this project by carbon fiber reinforced polymer (CFRP) sheets wrapped around the outside of reinforced concrete (RC) beams. To determine the failure criteria and maximum load-carrying capacity of beams, numerous specimens were cast and tested in a flexural testing machine.

Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants.

Smart manufacturing is the demand of industry 4.0, in which the mass production of difficult-to-cut materials is of great concern to fulfil the goal of sustainable machining. Presently, the machining of superalloy is of upmost interest because of its wide application.

Effects of Elevated Temperature on the Residual Behavior of Concrete Containing Marble Dust and Foundry Sand.

Concrete is a composite material that is commonly used in the construction industry. It will certainly be exposed to fires of varying intensities when used in buildings and industries. The major goal of this article was to look into the influence of mineral additions such as foundry sand and marble dust on the residual characteristics of concrete.

Design and Analysis of a Low-Cost Electronically Controlled Mobile Ventilator, Incorporating Mechanized AMBU Bag, for Patients during COVID-19 Pandemic.

The outbreak of novel COVID-19 has severely and unprecedentedly affected millions of people across the globe. The painful respiratory distress caused during this disease calls for external assistance to the victims in the form of ventilation. The most common types of artificial ventilating units available at the healthcare facilities and hospitals are exorbitantly expensive to manufacture, and their number is fairly inadequate even in the so-called developed countries to cater to the burning needs of an ever-increasing number of ailing human subjects.

Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications.

Electrically-conducting polymers (CPs) were first developed as a revolutionary class of organic compounds that possess optical and electrical properties comparable to that of metals as well as inorganic semiconductors and display the commendable properties correlated with traditional polymers, like the ease of manufacture along with resilience in processing. Polymer nanocomposites are designed and manufactured to ensure excellent promising properties for anti-static (electrically conducting), anti-corrosion, actuators, sensors, shape memory alloys, biomedical, flexible electronics, solar cells, fuel cells, supercapacitors, LEDs, and adhesive applications with desired-appealing and cost-effective, functional surface coatings. The distinctive properties of nanocomposite materials involve significantly improved mechanical characteristics, barrier-properties, weight-reduction, and increased, long-lasting performance in terms of heat, wear, and scratch-resistant.

Critical Review of Biodegradable and Bioactive Polymer Composites for Bone Tissue Engineering and Drug Delivery Applications.

In the determination of the bioavailability of drugs administered orally, the drugs' solubility and permeability play a crucial role. For absorption of drug molecules and production of a pharmacological response, solubility is an important parameter that defines the concentration of the drug in systemic circulation. It is a challenging task to improve the oral bioavailability of drugs that have poor water solubility.

Clinical Outcome of Neer Type II Lateral End Clavicle Fractures With Coracoclavicular Ligament Disruption Treated With Pre-Contoured Locking Plate and Endobutton.

Introduction Many surgical techniques have been described for the treatment of Neer type II lateral end clavicle fractures like open reduction and internal fixation with hook plate, tension band wiring, coracoclavicular screw fixation, and distal clavicle locking plate. However, most of these operative procedures are associated with high perioperative complications ranging from hardware prominence, hardware failure, screw and plate pull-out, and infection. As the lateral end clavicle fractures has both vertical and horizontal stress forces, any technique counteracting both the forces should result in a better clinical outcome.

Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts.

Despite several additive manufacturing techniques are commercially available in market, Fused Deposition Modeling (FDM) is increasingly used by researchers and engineers for new product development. FDM is an established process with a plethora of advantages, but the visible surface roughness (SR), being an intrinsic limitation, is major barrier against utilization of fabricated parts for practical applications. In the present study, the chemical finishing method, using vapour of acetone mixed with heated air, is being used.

Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm.

Fused filament fabrication (FFF), a portable, clean, low cost and flexible 3D printing technique, finds enormous applications in different sectors. The process has the ability to create ready to use tailor-made products within a few hours, and acrylonitrile butadiene styrene (ABS) is extensively employed in FFF due to high impact resistance and toughness. However, this technology has certain inherent process limitations, such as poor mechanical strength and surface finish, which can be improved by optimizing the process parameters.

Empirical Investigations during WEDM of Ni-27Cu-3.15Al-2Fe-1.5Mn Based Superalloy for High Temperature Corrosion Resistance Applications.

Monel K-500, a nickel-copper based alloy, is a very hard and tough material. Machining of such hard and tough materials always becomes a challenge for industry and this has been resolved by wire electric discharge machining (WEDM), a popular non-conventional machining method used for machining tough and hard materials having complex shapes. For the first time reported in this present research work is an experimental investigation executed on Ni-27Cu-3.

Current Concepts in Paediatric Femoral Shaft Fractures.

Pediatric femoral shaft fractures account for less than 2% of all fractures in children. However, these are the most common pediatric fractures necessitating hospitalization and are associated with prolonged hospital stay, prolonged immobilization and impose a significant burden on the healthcare system as well as caregivers. In this paper, the authors present a comprehensive review of epidemiology, aetiology, classification and managemement options of pediatric femoral shaft fractures.